Connecting The Terminal To A Computer (Pc) Via A Usb Connection; Using The Windows Phone App To Connect - Honeywell Dolphin 75E User Manual

5. If you want to Also remove provisioned content from my workplace, touch the box to select the option.
6. Touch Yes, and then Yes again to confirm restoring the factory settings.
Once the terminal resets, the language selection screen appears. For more information, see
Consumer Setup on page
Method 2
To perform a Factory Reset if your touchscreen is unresponsive and all other recovery methods have failed:
1. Press and hold the Volume Down
on the screen.
Note: Continue to hold the buttons down until the exclamation mark appears even if the Microsoft Feedback app tries
to load.
2. Press the following buttons in this order: Volume Up
Once the terminal resets, the language selection screen appears. For more information, see
Consumer Setup on page

Connecting the Terminal to a Computer (PC) via a USB Connection

You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.
Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps.

Using the Windows Phone App to Connect

1. Connect the terminal to the PC using the USB charge/communication cable supplied.
2. If you have a computer running Windows
If your have a computer running Windows 8 or Windows 8.1, the Windows Phone® app automatically opens when you
connect the terminal to the computer using the USB charge/communication cable supplied
If you have a computer running Windows 7 or Mac, go to
Phone app for desktop or Mac.
USB Door
Right Side Panel
of the Terminal
USB Charge/Communication Cable
3. In the Phone Companion app, select Windows as your terminal platform, and then set your sync preferences.
In the Windows Phone app, set your phone name and sync preferences. You can always modify your preferences later
by selecting Settings.
1-4.
and Power
1-4.
®
10, open the Phone Companion app from Start > All apps.
1
Micro USB Port
2
buttons simultaneously until a large exclamation mark appears
> Volume Down > Power
www.windowsphone.com
3
Complete the First Time
> Volume Down
Complete the First Time
to download and install the Windows
USB Port
.
1 - 13