Honeywell Dolphin 75E User Manual page 49

The HONWedge profile is applied whenever the 75e enters Wedge Mode. POS profiles are applied when a POS
application calls the POS API to set an active profile. POS profiles may be automatically applied using the Apply command
set to true.
Example Custom Profile
The example below contains two profiles, one for Wedge Mode and one for POS Mode.
• The exm file contains the required ConfigDoc element named "Data Collection Profiles". This is not optional and
must alway be included.
• The Section tags <section> identify the profile names. The POS profile name may be customized to anything
you want but wedge mode profile must be named "HONWedge".
For the example below, "C39 Internal Scanner" is used for the POS Mode profile and "HONWedge" for the
Wedge Mode profile.
• The command tags <cmd> identify the profile settings.
• The Device command <cmd="Device"> is set to Internal to indicate the internal scanner and not an external
scanner (e.g., ring scanner). The second profile, named "HONWedge", must contain a Device command set to
Internal but a POS profile can be set to either Internal or USB.
• The Type command (cmd="TYPE"), is set to Full, which instructs the scanning system to first restore defaults
before applying the commands in the profile.
• The Apply (cmd="APPLY") command instructs the scanning system to automatically apply the profile when a
POS application claims the scanner. The Apply command is not applicable to Wedge Mode. In Wedge Mode
the "HONWedge" profile is automatically applied whenever the scanning system switches to Wedge Mode.
• The "HONWedge" profile enables EAN13 and issues a command to include the check digit.
• The 'HONWedge" profile shows the syntax for issuing wedge commands, including how to enter binary data as
postambles or preambles.
<?xml version="1.0"?>
<ConfigDoc flags="000" name="Data Collection Profiles" desc="Profiles used for scanner configuration via POS Scanner
<HHPReserved>
<Key name="EXMVersion">1.0.1</Key>
<Key name="ContentVersion">1.0.0</Key>
</HHPReserved>
<Section flags="000" name="C39 Internal Scanner"
<Key cmd="DEVICE" desc="Specifies the scanner type" list="Internal,USB" name="Device
<Key cmd="TYPE" list="Incremental,Full"
<Key cmd="APPLY" list="true,false" min=""
<Key cmd="DEC_CODE39_ENABLED" list="true,false" name="Code 39 Enable Symbology" id="Enable"
<Key cmd="DEC_CODE39_MIN_LENGTH" name="Code 39 Minimum Character Length" id="MinLength" min="0"
</Section>
<Section flags="000" name="HONWedge"
<Key cmd="DEVICE" list="Internal,USB" name="Device
<Key cmd="TYPE" list="Incremental,Full"
<Key cmd="ENABLE_WEDGE" list="true,false"
<Key cmd="PREAMBLE"
<Key cmd="POSTAMBLE"
<Key cmd="ENTER_DELAY" min="" name="Enter
<Key cmd="WEDGE_POWER_TIMEOUT" min="2" max="10000"
<Key cmd="DEC_EAN13_ENABLED" list="true,false" name="EAN13 Enable Symbology" id="Enable"
<Key cmd="DEC_EAN13_2CHAR_ADDENDA_ENABLED" list="true,false" name="EAN13 2 Digit Addenda (UPC/EAN)"
id="Addenda2Digit"
<Key cmd="DEC_EAN13_5CHAR_ADDENDA_ENABLED" list="true,false" name="EAN13 5 Digit Addenda (UPC/EAN)"
id="Addenda5Digit"
<Key cmd="DEC_EAN13_CHECK_DIGIT_TRANSMIT" list="true,false" name="EAN13 Send Check Character"
id="CheckTransmit"
</Section>
</ConfigDoc>
id="C39">
name="ProfileType">Full</Key>
name="ApplyProfileOnLoad">false</Key>
id="WedgeConfig">
name="ProfileType">Full</Key>
name="WedgeEnable">true</Key>
name="Preamble">MyPreamble</Key>
name="Postamble">&#x0d;</Key>
Delay">400</Key>
gr="flag">false</Key>
gr="flag">false</Key>
gr="flag">true</Key>
Type">Internal</Key>
name="ImagerPowerTimeout">5000</Key>
API">
Type">Internal</Key>
gr="flag">true</Key>
max="48">3</Key>
gr="flag">true</Key>
3 - 7