Update And Backup; Enabling Automatic Updates; Using The Sd Card For Manual Flash - Honeywell Dolphin 75E User Manual

Update and Backup

Microsoft periodically releases software updates for the Windows 10 IoT Mobile Enterprise software running on the terminal.
To check the update status of the terminal software, in the Apps list, touch Settings
update. The update status is listed with time of the last update check. To manually check for updates, touch Check for
updates.
You can also set the terminal to automatically download and install the updates if:
• Sufficient space on the terminal storage is available.
• Sufficient charge on the battery is available.
• An active Wi-Fi network connection is available.
• Data sense and battery saver settings do not limit data usage.

Enabling Automatic Updates

To set the terminal to automatically download and install updates:
1. Touch Settings
2. Select Advanced options.
3. Select either Automatic (recommended) or Notify to schedule restart from the "Choose how updates are installed"
box.
To set the terminal to Defer updates, check the box. This setting does not affect security updates but it prevent you from
getting the latest Windows features when released.

Using the SD card for Manual Flash

This option is for advanced administrator or developer use to flash a specific firmware image to the 75e or if Internet access
is not available for over-the-air (OTA) automatic updates. To update the Dolphin 75e using from a microSD card, you will
need a:
• 4GB microSD card
• Valid Windows 10 IoT Mobile Enterprise full flash update image (.ffu) supplied by customer
Caution: All data on the terminal is erased during the flash process. Back up all files you want to keep before
1. Locate the Part Number (P/N) for your terminal. The number can be found printed on the label inside of the battery
compartment. The number starts with "75E".
2. Rename the update image to "upg_<platform>_00.00.ffu". <platform> corresponds to the first six characters of the Part
Number (P/N), excluding the dash (-).
Example file name: upg_75EL0N_00.00.ffu
3. Copy the renamed .ffu image to the root directory of the microSD card.
4. Install the microSD card in the 75e.
5. Apply external power to the terminal and power it on. The update will go through a verification phase and then an update
phase. A progress bar progress bar appears on the screen during each phase.
Important: The terminal must have power for the length of the entire flash process or it could become unstable.
Do not attempt to remove the battery during the process. The process can take up to 15 minutes.
6. Set up the terminal again when you are prompted to select a language.
5 - 14
> Update & security > Phone update.
updating the software.
> Update & security > Phone
support.