Connecting The Terminal To A Computer (Pc) Via A Usb Connection; Using The Windows Phone App To Connect; Using File Explorer Or Windows Explorer To Transfer Files - Honeywell Dolphin 75e User Manual

To perform a Factory Reset if your touchscreen is unresponsive and all other recovery methods have failed:
1. Press and hold the Volume Down
screen.
2. Press the following buttons in this order: Volume Up
3. Once the terminal resets, the set up Welcome screen appears. For more information, see
Terminal on page 1-4.

Connecting the Terminal to a Computer (PC) via a USB Connection

You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.
Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps.

Using the Windows Phone App to Connect

1. Connect the terminal to the PC using the USB charge/communication cable supplied.
If you are using Windows® 8, the Windows Phone® app automatically opens on the PC. If you are using Windows 7 or
Mac, go to www.windowsphone.com
USB Door
Right Side Panel
of the Terminal
USB Charge/Communication Cable
2. In the Windows Phone app, set your phone name and sync preferences.
The default phone name is "Windows Embedded Handheld". You can always modify your preferences later by selecting
Settings in the upper right corner of the app screen.

Using File Explorer or Windows Explorer to Transfer Files

To move files between your Dolphin terminal and PC without using the app:
1. Connect the terminal to the PC using the USB charge/communication cable supplied.
2. Depending on the Windows operating system either open File Explorer or Windows Explorer.
3. Under Computer, click on Windows Embedded Handheld > Phone.
4. You can now copy, delete and/or move files or folders between the computer and the terminal or the an microSD card
installed in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).
1 - 14
and Power buttons simultaneously until a large exclamation mark appears on the
> Volume Down
to download and install the Windows Phone app for desktop or Mac.
1
Micro USB Port
2
> Power > Volume Down
Power On and Set Up the
3
USB Port
.