Navigation/Function Buttons; Virtual Keyboard; Using The Virtual Keyboard; Turning Power On/Off - Honeywell Dolphin 75E User Manual

Navigation/Function Buttons

The Dolphin terminal has seven navigation/function buttons.
Button
Back
Administrator
or Developer
Defined
Scan
Search
Start
Right & Left
Side
Volume

Virtual Keyboard

The virtual keyboard appears when you open an application or select a field that requires text or numerical input. The content of
the keyboard may vary depending on the application in use and the input field requirements.

Using the Virtual Keyboard

During text input, you may need to switch between keyboard modes to access additional character sets (e.g., function keys,
symbols, and numbers). Each keyboard mode, includes navigation keys, which allow you to quickly switch between modes.
Touch the abc key to switch to the Qwerty Mode, and the &123 key to switch to the Numeric Mode. Touch and hold the
period "." key to access additional symbols (e.g., dash "-", exclamation point "!", question mark "?", colon ":") and
emoticons.
See Time and Language Settings
Note: The content of the keyboard and the mode initially displayed may vary depending on the application in use and the
input field requirements.

Turning Power On/Off

To turn the terminal On, press and release the Power button
To turn the terminal Off:
1. Press and hold the Power button
2. When the message, "slide down to power off" appears, release the button and swipe down toward the bottom of the screen.
You should always power off the terminal before removing the battery. For information on removing the battery, see
the Battery.
Function
Return to the previous screen or press and hold to open the App switcher.
By default, no function is assigned to this button. For information on advanced tools and
resources for IT professionals, go to https://technet.microsoft.com.
Wake the terminal from Sleep mode.
Trigger the scanner/imager.
If Cortana is turned Off, press to search the terminal and Web using Bing.
If Cortana is turned On, press to ask a question or initiate a voice command. To learn more
about Cortana, go to www.windowsphone.com.
Return to the Start screen.
Trigger the scanner/imager.
Press to raise or lower the volume of the active speaker. The status bar briefly expands when
you press either the volume up or down button.
Use the slider to adjust the volume for the Ringer + Notifications or touch the down arrow
access the volume adjustment for Media and apps.
on page 5-11 for additional information on configuring keyboard & input methods.
.
.
to

for
Replacing
1 - 9