Wiring Diagram - Makita HR262D Technical Information

W
iring diagram
Fig. D-2
[Wiring in Handle Section]
Lead wires must be tight in the area
shown in gray.
Fix lead wires in the Lead wire holders
indicated by dotted circle.
Switch
Diode
Do not route Lead wires
to Diode side over this rib.
ribs
inner wall
of Housing
Route Lead wires
between these ribs.
Route Lead wires between
the rib and the inner wall
of Housing.
Lead wire holders
To Brush holder
complete
Connector
Connector
FET (Field effect transistor)
P 21/22