Wiring Diagram - Makita HK1820 Technical Information

W
iring diagram
[1] Routing Wires Through Handle Base and Handle
Be careful not to pinch the Lead wires with the ribs. (Figs. D-2, D-3)
Fig. D-2
Handle base
Controller
Noise suppressor
(if used)
Do not put the Lead wires on this rib
or they will be pinched between the rib
and Handle.
Fig. D-3
Do not to put the Lead wire (clear)
of Noise suppressor on these ribs.
Handle
Handle cover
Do not to put the Lead wires on these ribs
or they will be pinched between the ribs
and Motor housing.
Handle,
viewed from Handle cover side
Through hole for
passing Lead wires
to the opposite side
Do not to put the Lead wires on this rib
or they will be pinched between the rib
and Handle cover.
Get other manuals https://www.bkmanuals.com
P 13/17
Handle base,
viewed from
Controller side
Through hole for
passing Lead wires
from Controller and
Connector housing
to the opposite side
Through hole for
passing Grounding
(Earth) wire from
the opposite side