Delete A Bluetooth Accessory; Usb Headsets - Cisco 8811 User Manual

Delete a Bluetooth Accessory

Procedure
Step 1
Press Applications
Step 2 Select a Bluetooth accessory and then press Disconnect.
Delete a Bluetooth Accessory
For Cisco IP Phone 8851 and 8861 only.
Procedure
Step 1
Press Applications
Step 2 Select a Bluetooth accessory and press Delete.
The Bluetooth accessory disconnects (if it was connected) and does not display on the Accessories list.

USB Headsets

For Cisco IP Phones 8851 and 8861 only.
For Cisco IP Phones 8851, 8851NR, and 8861.
Your phone supports USB headset devices attaching to all USB ports including side USB, back USB, and
Key Expansion Module USB ports.
For a list of supported headsets, see
headsets.html.
USB headsets not listed above may not function properly when attached to the USB port. For more information,
see the documentation from your USB headset manufacturer.
When using USB headsets with your phone, these conditions apply:
• The priority of USB headset over Bluetooth or analog headsets depends on the connected state of the
• During a call using headset, the audio path changes automatically if you plug in a USB headset but does
• The phone displays an appropriate message when you plug in the USB headset or adjust the volume
Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager
10.5
114
.
.
headset (only one headset can be connected at a time).
not change automatically if you plug out a USB headset.
using the phone volume control key.
http://www.cisco.com/c/en/us/products/unified-communications/ucphone_
Accessories