Table of Contents
Advertisement
Enable IP Pass-Through Mode
To turn off the mobile router functionality and assign the network IP address directly to
the attached device, enable IP pass-through.
If you make this change, the attached device restarts using a different driver
configuration.
WARNING:
If you enable this feature, WiFi is disabled and you must use a USB cable
to tether the device.
Note: This feature is available to Windows computer users. If you are a Mac user, do
not enable this option because you will be unable to access your device.
To enable IP pass through mode:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://mywebui.net or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
Note: The default admin password is unique to your device and is printed on the
product label located in the battery compartment During initial device setup, you
are asked to change the admin password. If you change the admin password during
initial device setup, you must use that password to log in. If you forget your new
password, you need to reset your router to restore the default admin password.
p>
The dashboard displays.
4. Select SETTINGS > Setup > Mobile Router Setup.
The ROUTER SETUP page displays.
5. Select the IP PASSTHROUGH ON button.
The default selection is AUTO.
Enable VPN Pass-Through Mode
To connect to a corporate network using VPN, you must first enable VPN connections
(pass-through).
Specify the Mobile Router
Network Settings
Nighthawk M5 5G WiFi 6 Mobile Router
57
User Manual
Advertisement
Table of Contents
