NETGEAR Arlo Q User Manual page 44

If you are using a computer, enter
browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the Arlo Q camera.
A list of modes displays.
4. Click or tap the Edit icon
The Edit Rule page displays.
5. Under If the following, click or tap Edit
The Motion Detection page displays.
6. Under Motion Detection Zones, click or tap the zone where you want the Arlo Q
camera to detect motion.
If you used a mobile device to specify the settings, your settings are saved.
7. If you used a browser to specify the settings, click Save.
Your settings are saved.
Modes, Rules, and Smart Alerts
arlo.netgear.com
next to the mode.
44
in the address bar of a
next to Motion is detected.