Use An Sd Card With Arlo Q Plus; Insert An Sd Card; View The Sd Card Status - NETGEAR Arlo Q User Manual

3. Use an SD Card With Arlo Q Plus

All recordings are stored to the cloud, but with an Arlo Q Plus camera, you can use
an SD card as a backup location to store recordings. Simply insert an SD card and
the camera automatically enables all the settings for you. The SD card cannot be
used on its own as a substitute for cloud recording.
If you put an SD card in the camera, the camera records to both the cloud and
the SD card for motion‑triggered and audio‑triggered recordings (not CVR). If the
camera is powered on, but the Internet goes down, the camera continues to record
to the SD card.
We support MicroSD cards, class 10 or higher, with up to 128 GB capacity, file
format FAT32.
The Arlo app notifies you if the SD card format is incorrect, if the SD card is full,
and so on. The camera can reformat the card for you. See
page 26.

Insert an SD Card

¾ To insert an SD card in an Arlo Q Plus camera:
1. Insert the SD card into the SD card slot on the camera.
2. Press the edge of the card until it is completely seated in the slot.

View the SD Card Status

The Arlo app notifies you if the SD card is getting full or if the SD card is not the
correct format. You can also use the Arlo app to view the SD card status.
Format an SD Card
23
on