NETGEAR Arlo Q User Manual page 42

6. Click or tap When motion is detected and When audio is detected and then
click or tap Next.
The Motion Settings page displays.
7. Set the motion sensitivity and the motion detection zones.
You can use the sliders to adjust the sensitivity of the motion sensor:
• Raise the sensitivity percentage to increase the number of videos that Arlo
captures.
• Lower the sensitivity percentage to decrease the number of videos that Arlo
captures.
• To specify motion detection zones, click or tap the zone.
8. Click or Tap Next.
The Audio Settings page displays.
9. Set the audio sensitivity and click or tap Next.
The Motion Settings page displays.
10. When prompted, specify what you want the camera to do when motion or audio
is detected and click or tap Next.
You can select Record video, Take snapshot, or Do nothing.
11. When prompted, specify if you want to be notified with alerts when motion or
audio is detected.
If you are using a computer web browser, you can also specify the recording
time setting.
12. Click or tap Next.
The Summary page displays.
13. Review your settings and click or tap Save.
Your settings are saved.
Modes, Rules, and Smart Alerts
42