NETGEAR Arlo Q User Manual page 9

If you are using a mobile device with a Touch ID® fingerprint identity sensor,
you are prompted to enable Touch ID or skip.
2. To use Touch ID, tap Enable Touch ID.
If you tap Skip, you can turn on the Arlo app fingerprint ID login later. See
the Arlo App Fingerprint ID Login On and Off
3. Click or tap New System Setup.
A list of cameras displays.
4. Click or tap the camera that you want to set up.
5. Apply power to your camera:
• Arlo Q camera. Plug in your Arlo Q camera.
• Arlo Q Plus camera WiFi connection. See
on page 6.
• Arlo Q Plus camera PoE connection. See
With PoE
on page 7.
• Arlo Q Plus camera Ethernet connection. See
Camera With Ethernet
6. Wait until the camera LED is blinking amber.
A slow blinking amber LED indicates that the camera is powered on and is ready
for setup.
7. Click or tap Continue.
8. Enter the name and password for the WiFi network that you want your camera
to connect to.
If you use an existing Arlo Wire‑free system, do not sync your Arlo Q camera to
your base station.
Set Up Your System
on page 45.
on page 8.
9
Connect an Arlo Q Plus With WiFi
Connect an Arlo Q Plus Camera
Connect an Arlo Q Plus
Turn