NETGEAR D7000 User Manual page 63

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Field
Multiplexing Method
VPI
VCI
Use VLANID
Priority (0 ~ 7)
Bridge Mode
Account Name
Domain Name
Internet IP Address or IPTV IP Address (depending on your selection in Step 7)
Get Dynamically from ISP
Use Static IP Address
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Description
These settings are disabled because they do not apply to a VDSL connection.
Select the Use VLANID check box and enter the VLAN ID, as indicated by your
ISP.
A VLAN ID might be required if you subscribe to both Internet service and IPTV
service. In some unusual situations, a VLAN ID is required for VDSL Internet service.
If your ISP did not provide you with a VLAN ID, leave the Use VLANID check box
cleared, which is the default setting.
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did
not provide you with a priority value, leave the default setting (0).
This setting is an option that applies to the IPTV interface only.
For information about configuring bridge mode, see
Devices on page 202.
Enter the account name, as indicated by your ISP. This name might also be called
the host name.
If your ISP did not provide you with an account name or host name, leave the default
setting.
Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns
these addresses.
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service. The gateway is the ISP router to which
your modem router connects.
Manage the Internet Settings Manually
63
Enable Bridge Mode for IPTV