NETGEAR D7000 User Manual page 267

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
5. Select the Port Triggering radio button.
6. Click the Add Service button.
7. Specify a new port triggering rule with a custom service or application as described in the following table.
Field
Service
Service Name
Service User
Service Type
Triggering Port
Required Inbound Connection
Description
Enter the name of the custom service or application.
From the Service User menu, select Any, or select Single address and enter the IP address
of one computer:
• Any. This is the default setting and allows any computer on the Internet to use this service.
• Single address. Restricts the service to a particular computer.
Select the protocol (TCP or UDP) that is associated with the service or application.
Enter the number of the outbound traffic port that must open the inbound ports.
Manage Port Forwarding and Port Triggering
267