NETGEAR DG834Gv2 - 54 Mbps Wireless ADSL Firewall Modem Configuration Manual
Pc with prosafe vpn client adsl modem router
Hide thumbs
Also See for DG834Gv2 - 54 Mbps Wireless ADSL Firewall Modem:
- Installation manual (2 pages) ,
- Specifications (2 pages) ,
- Reference manual (268 pages)
Related Manuals for NETGEAR DG834Gv2 - 54 Mbps Wireless ADSL Firewall Modem
Summary of Contents for NETGEAR DG834Gv2 - 54 Mbps Wireless ADSL Firewall Modem
- Page 1 DG834v3 – Scenario: This document will guide you on how to create a VPN policy for your DG834v3, as well as how to configure the VPN Pro-Safe VPN client in order to allow a Virtual Private Network to be established over the internet.
-
Page 2: Vpn Policy
DG834v3 – VPN Policy: Start by creating the IKE policy in the management GUI with these parameters: (NOTE: The Local LAN and Remote LAN addresses must be in different networks with different IP addresses as in the example above, however they can be any two different private networks. Be sure to fill accordingly with the information relevant to your own networks) - Page 3 ProSafe VPN client – VPN Policy: Right click on “My Connections” and add a new connection. Use the same name you used to name the VPN policy in your VPN gateway. In this example the name will be “vpn”. Click on the name of the new created connection and fill the parameters accordingly, for this example we’ll use these: (NOTE: The Gateway IP address must be the external IP address of your DG834v3)
- Page 4 Click on “My Identity” and fill the fields accordingly, be sure to click on the Pre-Shared Key button and input your own pre shared key. Here are the settings used in our example: Click on “Security Policy” and verify the following settings:...
- Page 5 Next, expand “Security Policy” and “Authentication (Phase 1)” – Click on “Proposal 1” and verify the settings contained to match the ones of your policy. Functional settings in our example: Open the “Key Exchange (Phase 2)” category – Click on “Proposal 1” and verify the settings contained to match the ones of your policy.
- Page 6 For last, right-click on the tray icon of the Netgear VPN client with your mouse, select connect and click the connection you just created. If your settings are correct you’ll receive a message confirming the connection. Here is a view of the connection log from our example VPN scenario:...