NETGEAR D7000 User Manual page 28

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
a. Select the Yes radio button.
b. Click the Next button.
The Setup Wizard performs a full scan, which might take up to six minutes.
19. (Only if the following page displays) Specify how to manage problems with the detection of the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet connection.
If this page does not display, continue with Step 20.
Take one of the following actions:
• If you did not yet power cycle the modem, do so now:
a. Unplug your modem's power, leaving the modem connected to the wall jack for your Internet service.
b. If your modem includes a battery backup, remove the battery.
c. Wait 10 seconds.
d. If your modem includes a battery backup, reinsert the battery.
e. Plug in your modem's power and turn on your modem.
f. Wait two minutes.
g. Select the I just power cycled the modem and waited for 2 minutes radio button.
h. Click the Next button.
• See if the DSL cable is not fully inserted or is inserted at the wrong place. If necessary, do the following:
Install and Access the Modem Router and Its Network
28