NETGEAR D7000 User Manual page 16

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Figure 3. Modem router back panel
In addition to the three antennas, viewed from left to right, the back panel contains the following components:
• LED Off/On switch. Move the LED Off/On switch to to the Off position to turn off all LEDs, except for the
Power LED.
• Reset button. For information about using the Reset button, see
Settings on page 223.
• Power On/Off button. Press the Power On/Off button to provide power to the modem router.
• DC power connector. Connect the power adapter that came in the product package to the DC power connector.
• Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the modem router to a fiber or cable modem.
This port is colored red.
Note You can use either the Internet port or the DSL port for WAN connectivity.
• Ethernet LAN ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem router to LAN devices.
These ports are colored yellow.
• DSL port. One RJ-11 DSL port for connecting the modem router to an ADSL or VDSL line. This port is colored
gray.
Hardware Overview of the Modem Router
16
Return the Modem Router to Its Factory Default