NETGEAR D7000 User Manual page 120

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Tip If you want to change the modem router's function, use a wired connection to avoid being
disconnected when the new function takes effect.
To set up the modem router as an AP:
1. Use an Ethernet cable to connect the red Internet port on the back panel of the modem router to a LAN port on
the other router.
2. Launch a web browser from a computer or WiFi device that is connected to the network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Wireless Access Point.
The Wireless Access Point page displays.
6. Select the Enable Access Point Mode check box.
The information onscreen adjusts.
7. Scroll down and select the radio button for the IP address setting that you want to use:
Manage the WiFi Network Settings
120