NETGEAR D7000 User Manual page 25

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
8. If the Power LED does not light, press the Power On/Off button.
Wait for the WiFi LED
9.
If the WiFi LED does not light, press the WiFi On/Off button
10.
Check the DSL LED
If the modem router is connected to a DSL service, the DSL LED lights white.
11. Connect a computer to the modem router by one of the following methods:
• Ethernet cable. Use an Ethernet cable to connect your computer to a yellow Ethernet LAN port on the
modem router.
The product package contains a yellow Ethernet cable.
Your computer connects to the modem router's LAN.
• WiFi. Connect to the default WiFi network of the modem router:
a. On your computer or WiFi device, find and select the WiFi network.
The WiFi network name (SSID) is on the product label.
b. Join the WiFi network and enter the WiFi password.
The password (network key) is on the product label.
Your computer or WiFi device connects to the modem router's WiFi network.
Note If the computer is set to a static (fixed) IP address (this setting is uncommon), either change
the computer to obtain an IP address automatically from the modem router through DHCP,
or change the IP address of the computer to a static IP address in the
192.168.0.2–192.168.0.254 range.
12. Launch a web browser.
Install and Access the Modem Router and Its Network
to light solid white.
.
25
.