Advertisement
55. Remove the adhesive backing from the antenna.
Insert the antenna plate over the roof lining, and
attach the antenna to the front window aligning it with
the template.
56. Remove the template.
57. Gently pull down the roof liner, and tuck the antenna
cable under it.
ROOF LINING
ANTENNA
CABLE
58. Using scissors, cut one foam cushion tape in half.
Route the antenna cable towards the driver's side of
the vehicle, and secure the antenna cable to the roof
panel with the two halves of foam urethane tape.
ANTENNA
CABLE
VEHICLE
HARNESS
Cut.
URETHANE
TAPE
16 of 23
VEHICLE
HARNESS
VEHICLE PANEL
59. Pull away the weatherstrip, and route the antenna
cable down and under the dashboard through the
front pillar opening.
60. Secure the antenna cable to the vehicle harness with
four wire ties.
6D18400Y
6D18420Y
AII 38576-38846 (0802)
ANTENNA
CABLE
WEATHER STRIP
VEHICLE CLIP
VEHICLE
HARNESS
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
FRONT PILLAR
TRIM OPENING
721511AY
4 WIRE TIES
ANTENNA
CABLE
6D18430Y
Advertisement
