Honda 08E91-E22-100A Installation Instructions Manual page 11

34. Align the green tape on the engine starter harness
with the clip on the vehicle harness, and secure the
engine starter harness to the vehicle harness with
one wire tie.
ENGINE
STARTER
HARNESS
35. Near the connector, secure the engine starter
harness to the vehicle harness with one wire tie.
ENGINE STARTER
HARNESS
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
HARNESS
VEHICLE
CLIP
GREEN
TAPE
WIRE TIE
6D1811AY
2 LONG
WIRE TIES
VEHICLE
HARNESS
VEHICLE
HARNESS
WIRE TIE
6D1819EY
36. Secure the engine starter harness to the vehicle
harness with two long wire ties at the locations
shown.
37. Reinstall the vehicle unit to the vehicle bracket using
the vehicle bolt removed in step 24.
VEHICLE
BRACKET
38. Route the engine starter harness along the vehicle
harness to the front of the fuse box.
39. Loosely attach the engine starter harness to the
vehicle harness with one wire tie.
FUSE BOX
AII 38576-38846 (0802)
VEHICLE
UNIT
TPMS CONTROL UNIT BOLT
(Removed in step 24.)
WIRE TIE
(Loosely secure.)
VEHICLE
HARNESS
ENGINE
STARTER
HARNESS
721503AY
6D1820AY
11 of 23