Function Check - Honda 08E91-E22-100B Installation Instructions Manual

9. The following message will display: Obtain PCM-
code (IMMOBILIZER PCM CODE) from iN. This
vehicle's VIN will be required to obtain the
password. (USA). Click the check button.
"Obtain PCM-code" message
10. Input the PCM code, then click the check button.
NOTE: To ensure security, the PCM code
(password) is changed everyday, so it is impossible
to register the remote engine starter if the date of the
PCM code acquisition and registration are different.
The date of the HDS tester should also be the same.
Input the PCM code.
© 2009 American Honda Motor Co., Inc. – All Rights Reserved.
CHECK BUTTON
CHECK BUTTON
AII 42460 (0908)
11. The following message will display: The
registration of the Remote Control Engine Starter
Unit has been completed. Click the check button.
"Registration" message
12. The following message will display: Check that the
engine can be started by the Transmitter. Click
the check button.
"Check that the engine can be started
by the Transmitter"
13. Perform the function test on the next page, then
disconnect the HDS.

FUNCTION CHECK

CHECK BUTTON
CHECK BUTTON
19 of 21