Makita LS0714 Technical Information page 8

R
epair
[7] Assembling safety cover section
1. Insert the tail portion of spiral spring 26 into the elliptical hole of safety cover. See Fig. 7-1.
2. Mount center washer to safety cover by aligning its holes with four bosses of safety cover. See Fig. 7-2.
3. Mount center cover by inserting the another tail portion of spiral spring 26 into the center cover's hole.
See Fig. 7-3.
4. Mount center plate to safety cover by fitting four bosses of safety cover into center plate's holes.
See Fig. 7-4.
5. Fix the assembled parts with pan head screw M5x18. See Fig. 7-5.
Fig. 7-1
Safety cover
Fig. 7-3
Another tail portion of spiral spring 26
Fig. 7-5
Flat washer 5
Pan head screw
M5x18
Safety cover
Tail portion
Elliptical
hole
Spiral spring 26
Center cover
Center cover
Fig. 7-2
Safety cover
Fig. 7-4
Another tail portion
of spiral spring 26
Four Bosses
P 8/ 26
Four Bosses
Center washer
Center plate