Makita LS0714 Technical Information page 17

R
epair
2. Make precise adjustment so that the laser line should be aligned with the line of jig for laser line adjustment (1R315)
when lowering the jig until it reaches the pan head screw M5x16 of link plate side. See Fig. 20-3.
Fig. 20-3
Link plate
Link plate
Pan head screw
M5x16 of link plate side
3.When lifting up the jig for laser line adjustment (1R315) until it reaches the pan head screw M5x16 of the laser box side,
be sure to make precise adjustment as Fig. 20-4.
Fig. 20-4
Bearing box
Jig for laser line
adjustment (1R315)
Jig for laser line
adjustment (1R315)
Bearing box
Laser box
Pan head screw
M5x16 of laser
box side.
P 17/ 26
Line of jig for laser
line adjustment (1R315)
laser line should be aligned
with the line of jig.
Line of jig
laser line should be aligned
with the line of jig for laser
line adjustment.