Makita LS0714 Technical Information page 5

R
epair
[2] Removing motor unit (blade case, motor housing, handle etc.) from front arm complete
1. Remove safety cover section from blade case as illustrated in Fig. 3-1, Fig.3-2 and Fig.3-3.
Fig. 3-1
Stopper pin
Lock the motor unit by pushing
while keeping the motor unit at the rest position.
Fig. 3-3
+ Flat head screw M5
Turn safety cover and then open center cover as illustrated
above. + flat head screw M5 comes into sight at that time.
The safety cover section can be separated from motor unit
by removing the + flat head screw M5.
2. Remove the screws in Fig. 3-4 to disconnect the linkage of motor unit and front arm complete.
Fig. 3-4
Hex socket headbolt M6x10
(for securing pipe16-90)
Knob 20
knob 20 for stopper pin
Center cover
Safety cover
Ring 6
Flat washer 6
Fig. 3-2
Hex bolt M6x14
Remove hex bolt M6x14 from center cover.
Link plate
Hex socket head bolt M6x20
(for fixing link plate)
P 5 / 26
Center cover