Makita LS0714 Technical Information page 23

C
ircuit diagram
LS0714F (with Fluorescent light)
Black
White
Red
(1)
(5)
(1) Power supply cord
(2) Main switch
W
iring diagram in handle L
LS0714F (with Fluorescent light)
Main switch
Noise suppressor
Boss
Insulated
connector
The following lead wires for connecting insulated connector
should be put into lead wire holder so that insulated connector
does not rise from handle L.
* Lead wire (red) to switch
* Lead wire (blue) to light assembly
* Field lead wire (orange)
* Lead wire (white) of noise suppressor
2 All lead wires have to be put on the right side of boss.
Color index of lead wires' sheath
Orange
Blue
(2)
(3) Insulated connector
(4) Noise suppressor
(4)
Brush
(3)
holder A
(7)
(6)
(5) Terminal block
(6) Connectors
Motor housing
3 Put field lead wires (orange) into lead wire holder
so that their wires do not sag in the motor housing.
4 When putting the lead wire into lead wire holders,
the thin lead wires have to be put under the thick
wires so as not to rise from the original position.
5 Power supply cord should be put so that its sheath
portion is between Rib C and the wall of housing L.
P 23/ 26
Brush
holder B
(8)
(7) Light assembly
(8) Support complete
Power supply cord
Rib C
Terminal block