Wrr-Queue Cos-Map - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
the no form of this command to remove an existing aggregate policer from a
policy map.
Syntax
aggregate-policer-name
police aggregate
aggregate-policer-name
no police aggregate
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Command Mode
Policy-map Class Configuration mode
User Guidelines
An aggregate policer can be applied to multiple classes in the same policy
map. An aggregate policer cannot be applied across multiple policy maps or
interfaces.
Use the exit command to return to the Policy-map Configuration mode. Use
the end command to return to the Privileged EXEC mode.
Example
The following example applies the aggregate policer called Policer1 to a class
called Class1 in a policy map called Policy1.
Console(config)# policy1
policy-map
Console(config-pmap)# class1
class
Console(config-pmap-c)# policer1
police aggregate

wrr-queue cos-map

Use the wrr-queue cos-map Global Configuration mode command maps
Class of Service (CoS) values to a specific egress queue. Use the no form of
this command to restore the default configuration.
Syntax
queue-id cos0 cos7
wrr-queue cos-map ...
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
738
Quality of Service (QoS) Commands