Snmp-Server Group - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
• excluded—Specifies that the view type is excluded.
Default Configuration
Default and DefaultSuper are the default view names.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The command logical key is the pair (view-name, oid-tree).
The number of views is limited to 64.
Default and DefaultSuper views are reserved for internal software use and
cannot be deleted or modified.
Example
The following example creates a view that includes all objects in the MIB-II
system group except for sysServices (System 7) and all objects for interface 1
in the MIB-II interface group.
Console(config)#
Console(config)#
Console(config)#
included

snmp-server group

The snmp-server group Global Configuration mode command configures a
new Simple Network Management Protocol (SNMP) group or a table that
maps SNMP users to SNMP views. Use the no form of this command, remove
a specified SNMP group.
Syntax
snmp-server group
notifyview]} [read readview] [write writeview]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\SNMP.fm
snmp-server view
snmp-server view
snmp-server view
groupname v1 | v2 | v3 {noauth | auth | priv} [notify
{
user-view system
user-view system.7
user-view ifEntry.*.1
SNMP Commands
included
excluded
163