Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
Example
The following example enables authentication based on the station's MAC
address on gigabitethernet port 1/0/1.
Console(config)#
gi1/0/1
interface
Console(config-if)#
dot1x mac-authentication mac-only
dot1x traps mac-authentication success
Use the dot1x traps mac-authentication success Global Configuration mode
command to enable sending traps when a MAC address is successfully
authenticated by the 802.1X mac-authentication access control. Use the no
form of this command to disable the traps.
Syntax
dot1x traps mac-authentication success
no dot1x traps mac-authentication success
Parameters
This command has no arguments or keywords.
Default
Default is disabled.
Command Mode
Global Configuration mode
dot1x traps mac-authentication failure
Use the dot1x traps mac-authentication failure Global Configuration mode
command to enable sending traps when MAC address was failed in
authentication of the 802.1X MAC authentication access control. Use the no
form of this command to disable the traps.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
319
802.1x Commands
Advertisement
Table of Contents
