FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
notifications on an interface. Use the no form of this command to restore the
default configuration.
Syntax
lldp notifications
no lldp notifications
Parameters
•
enable—Enables sending LLDP notifications.
•
disable—Disables sending LLDP notifications.
Default Configuration
Sending LLDP notifications is disabled.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example enables sending LLDP notifications on
gigabitethernet port 1/0/5.
Console(config)#
Console(config)#
lldp notifications interval
Use the lldp notifications interval Global Configuration mode command to
configure the maximum transmission rate of LLDP notifications. Use the no
form of this command to return to the default.
Syntax
lldp notifications interval
no lldp notifications interval
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\LLDP.fm
{enable | disable}
gigabitethernet 1/0/5
interface
lldp notifications
seconds
10
LLDP Commands
431