Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
management access-class
The management access-class Global Configuration mode command restricts
management connections by defining the active management access list. To
disable management connection restrictions, use the no form of this
command.
Syntax
management access-class {console-only |
no management access-class
Parameters
•
console-only—Specifies that the device can be managed only from the
console.
•
name—Specifies the access list name to be used. (Length: 1–32
characters)
Default Configuration
The default configuration is no management connection restrictions.
Command Mode
Global Configuration mode
Example
The following example defines an access list called mlist as the active
management access list.
Console(config)#
show management access-list
The show management access-list Privileged EXEC mode command displays
management access lists.
Syntax
show management access-list [
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Management_ACL.fm
management access-class
name
]
name
}
mlist
Management ACL Commands
155
Advertisement
Table of Contents
