Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Example
The following example renames the configuration file.
Console#
rename
boot system
The boot system Privileged EXEC mode command specifies the active
system image file that is loaded by the device at startup.
Syntax
{ image-1 | image-2 } [switch number | all]
boot system
Parameters
•
switch number—Specifies the unit number. If unspecified, defaults to the
master unit number.
•
image-1—Specifies that image-1 is loaded as the system image during the
next device startup.
image-2—Specifies that image-2 is loaded as the system image during the
•
next device startup.
Default Configuration
This command has no default configuration.
The default unit number is the master unit number.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to determine which image is the active
image.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
138
Configuration/Image File Commands
CLI\files\Configuration_Image.fm
configuration.bak m-config.bak
Advertisement
Table of Contents
