Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
When changing the iSCSI session aging time, the following occurs:
•
If the aging time is increased, the aging time for the current session is
recalculated and increased by the difference between the new aging time
and the current aging time.
•
If the aging time is decreased, the aging time for the current session is
recalculated and decreased by the difference between the new aging time
and the current aging time. If, after recalculation, it is determined that the
current session idle time is greater than the new aging time, the session is
immediately terminated.
Example
The following example sets the aging time for iSCSI sessions to 10 minutes.
Console(config)#
iscsi max-tcp-connections
To set the maximum number of iSCSI sessions that can be supported use the
iscsi max-tcp-connections command in global configuration mode. To return
to default, use the no form of this command.
Syntax
iscsi max-tcp-connections
no iscsi max-tcp-connections
Parameters
max-connections
that can be supported. (5-1024 )
Default Configuration
256 TCP connections
Command Mode
Global Configuration mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
594
iSCSI Commands
CLI\files\iSCSI.fm
iscsi aging-time
max-connections
—Specifies the maximum number of iSCSI connections
10
Advertisement
Table of Contents
