Box Of Air Filter - Honda 2010 CBX 250 Workshop Manual

FUEL SYSTEM

BOX OF AIR FILTER

DISMANTLING/Installation
Remove the following components: Fuel tank (page
2-4) Fenders rear (page 2-3) Battery (page 16-4)
Switch magnetic start (page 18-11) Remove the fuse
box. Remove the two bolts and accommodation of
the battery.
Remove the bolt and loosen the tube clamp of connecting
the resonator. Remove the resonator.
Remove the two screws, the cover of the box of air filter and
the air filter (page 3-6). Disconnect the tube of breathing the
air filter. Loosen the screw on the tube clamp of connecting
the carburetor.
Disconnect the breather tube from the casing of the
engine. Remove the highlight of the box of air filter of the
hub of rubber chassis
Remove the box of air filter. The installation of the pieces
are performed in the reverse order to dismantling.
5-4
ACCOMMODATION OF THE BATTERY
BOLT
SCREW ON THE tube clamp
BREATHER TUBE SCREW ON THE TUBE CLAMP
Connection
DEL TUBO DE CONEXIÓN
TUBO DE RESPIRO DE LA CARCASA DEL MOTOR
Highlight/HUB OF RUBBER
CBX250
BOLT
RESONATOR