CBX250
MAINTENANCE
INSPECTION OF THE REAR SUSPENSION
Support motorcycle firmly on a proper support and to lift the
rear wheel of the soil. To verify the bearings of the artic-
ulation with regard to wear, hold the swing arm and trying
move laterally the rear wheel. Check the bearings swing arm
with regard to wear, holding the rear wheel and trying move
the swing arm in all directions. Replace the bearing case
observe any slack (refer to Section 14). Inspect the action of
rear shock compressing the rear end several times. Inspect
the whole of the damper with regard to leakages, damage or
fixers loose. Replace the components that cannot be
repaired. Tighten all the nuts and bolts. Refer to Section 14
to obtain information with regard to services in the damper.
NUTS, BOLTS AND FIXERS
Make sure that all the bolts and nuts chassis are tight to
the pair of proper tightening (p. 1-13). Verify that all the
pins hendidos, pins of security, clamps hoses and cable
trays are located and fixed properly.
3-22