Replacement Of The Bearings Of The Crankshaft/Flywheel; Slack Radial In The Head Of The Crank; Gear Flywheel; Bearing Of The Crankshaft/Flywheel - Honda 2010 CBX 250 Workshop Manual

CBX250
CRANKSHAFT/FLYWHEEL

Slack Radial in the Head of the Crank

Measure the slack radial in the head of the crank using an
indicator of quadrant.
Service Limit 0,05 mm

GEAR FLYWHEEL

Gear Flywheel
Check the machinery of flywheel with regard to wear
or damage.

Bearing of the Crankshaft/Flywheel

Turn the tracks internal each ball with your finger. The
bearings must be turning smoothly and without noise.
Make sure that external tracks of the bearings are firmly
subject in the casing of the engine. Replace the bearings,
in case of need.
BEARING THE CRANKSHAFT
REPLACEMENT OF THE BEARINGS OF
THE CRANKSHAFT/FLYWHEEL
Use the special tools to remove the bearings of the crankshaft
halves of the cover of the engine.