Alternator /Clutch Service Information; Alternator /Clutch Specifications; Alternator /Clutch Troubleshooting; Alternator /Clutch Special Tools - Honda 2010 CBX 250 Workshop Manual

CBX250
SERVICE INFORMATION
INVESTIGATION OF FAULTS
ALTERNATOR STATOR
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•Services submitted in this section can be made with the engine installed in the chassis. •In this section describes pro-
cedures of service of stator alternator, driving the engine and clutch start. These components can be removed with the
engine installed in the chassis. •Refer to Section 18 to obtain information in respect of services in the starter motor.
SPECIFICATIONS
D. E. of highlight the spiral commanded the start
TORQUE VALUES
Bolt of engine flywheel
Bolt Torx clutch start
thread Bolt for fixing the pulse generator power
Bolt of fixing the stator
Bolt of pin wiring stator
SPECIAL TOOLS
Support of the fly wheel of the engine
Extractor of the rotor
Extension bar
INVESTIGATION OF FAULTS
The starter motor turns, but the motorcycle engine does not start. • Clutch defective
start • damage in the machinery intermediate and spiral of reduction in the starter
motor
10-1
10-1
10-2
Item
10. ALTERNATOR /CLUTCH
DISMANTLING OF THE FLY WHEEL
CLUTCH START
INSTALLING THE FLY WHEEL
Value
45,660 – 45,673
103 N.m (10,3 kg.m) Apply oil to the thread and
to the surface of settlement
16 N.m (1,6 kg.m) Apply locks chemistry to the
5 N.m (0,5 kg.m)
10 N.m (1,0 kg.m)
10 N.m (1,0 kg.m)
07725-0040000
07733-0020001
07716-0020500
10-3
10-4
10-6
Unit: mm
Limit de Servicio
45,63