Alternator Stator; Dismantling Of The Lid Left Side Of The Carcass Of The Engine - Honda 2010 CBX 250 Workshop Manual

ALTERNATOR

ALTERNATOR STATOR

DISMANTLING OF THE LID LEFT SIDE OF THE CAR-
CASS OF THE ENGINE
Remove the three bolts and the lid of intermediate gear
boot.
Remove the gasket.
Remove the gear intermediate boot and the respective
axle of the lid left side of the casing of the engine.
Remove the side cover (page 2-2).
Disconnect the connector 3P alternator and the connector
3P from the pulse generator power / switch of deadlock.
Remove the following components:
Top of piñon of transmission (page 6-3).
Cable breaker of deadlock (page 19-12).
Remove the bolts and the lid left side of the casing of the
engine.
d
The cover of alternator (stator) is fixed magnetically
behind the wheel of the engine. Be careful to remove.
10-2
BOLT
INTERMEDIATE GEAR BOOT
AXLE
CONNECTOR 3P FROM THE PULSE GENERATOR
POWER/SWITCH DEADLOCK
CONNECTOR 3P ALTERNATOR
BOLT
CBX250
TOP GEAR IN-
TERMEDIATE
BOOT
GASKET
TOP SIDE LEFT.