Table of Contents
Advertisement
LIGHTS/INDICATORS/SWITCHES
INSTRUMENT PANEL
DISMANTLING/Installation
Remove the two bolts and the collars.
Release the connector 3P headlamp.
Remove the two screws, nuts and the casing of the
headlight.
Remove the clamp.
Disconnect the cable of the speedometer.
Disconnect the connector 16 of the table of instruments.
Remove the bolts and the picture of instruments of the
higher bridge.
The installation is performed in reverse order dismantling.
DISMANTLED
Remove the four screws and the bottom layer of the table
of instruments.
Remove the three nuts, gums and the support of the table
of instruments.
The installation is performed in reverse order dismantling.
19-6
NUTS/BOLTS
CASING OF THE HEADLIGHT
CONNECTOR
16P
HIGHER BRIDGE
BOLTS
INSTRUMENT PANEL
NUTS
SCREWS
BOTTOM LAYER
CBX250
HEADLIGHT UNIT
SCREWS
SPEEDOMETER
CABLE
BRACKET
Advertisement
Table of Contents
Troubleshooting
