The Picture Of Instruments Does Not Work - Honda 2010 CBX 250 Workshop Manual

CBX250

The picture of instruments does not work

Check the fuse main (20), the auxillary fuse
(15) and the fuse in the clock / kilometer (10)
in the fuse box.
Remove the connector 16 of the table of
instruments and measure the voltage
between the connector cable Black /
Brown and the connector cable Green,
from the side of the wiring.
Voltage specified: battery voltage
Remove the connector 16 of the table of instru-
ments and measure the voltage between the
connector cable Red / Green and the connector
cable Green, from the side of the wiring.
Voltage specified: battery voltage
Remove the connector 16 of the table of
instruments and check to see if there is a
continuity between the connector cable
Green, from the side of the wiring, and the
ground wire.
Disconnect the cable positive (+) battery.
Wait a few seconds plug back and check
the functioning of the table of instruments.
Fuse blown
Normal
Abnormal
Normal
Abnormal
Normal
There is no
continuity.
There is a continuity.
Abnormal
LIGHTS/INDICATORS/SWITCHES
• Replace the fuse
•Circuit interrupted in the cabling.
•Contact inappropriate in the terminal
connector.
•Wiring in short circuit.
•Auxillary fuse (15) burned.
•Circuit interrupted in the cabling.
•Contact inappropriate in the terminal
connector.
•Wiring in short circuit.
•Fuse in the clock / kilometer burned (10).
•Main fuse.
•Circuit interrupted in the cabling.
•Contact inappropriate in the terminal
connector. •Wiring in short circuit.
•Table of instruments defective.