TRANSMISSION
Inspect the stump drum of changing gears in the right half
of the casing of the engine, with regard to excessive wear
or damage.
Measure the D. I. the stump drum.
Service
Limit
Axle of the forks of the change of gears
Check the axle of the forks of the change of gears with
regard to damage and twist.
Measure the D. E. the axle of the forks, according to the
illustration.
Service
Limit
Tensile distribution chain
Check with regard to damage. Replace, in case of need.
The Spindle gears
Remove the rings of pressure and the spring of return. Also
Inspect the plate selector gears with regard to wear or
damage.
Inspect the spring of return and the springs of replenishment
with regard to fatigue or damage.
Inspect the spindle of gearbox with regard to twist, excess-
ive wear and other damage.
11-6
20,07 mm
12,90 mm
PLATE OF THE GEAR
SELECTOR
CBX250
RETURN SPRING
RINGS OF PRESSURE