Toshiba GR200 Series Instruction Manual page 477

detected. The detecting signal is denoted as "Traveling OR" in Table 3.6-2.
Note: Criteria "unmatched conditions" are decided when the "Test-bit status" in a
*4
command is not identical to the "IED test status".
Note: The user needs to program the PLC logic "Control hierarchy condition". The
*5
user is also required to connect the logic condition with the select condition logic
using the connection point "LEDR01_CTRL_RIGHT". For more information, see
chapter
"LEDR01_CTRL_RIGHT" is provided in Table 3.6-3.
Note: To identify the input point of the LEDR function, see Table 3.6-2.
*6
Table 3.6-2 Input signals for condition logic
Signal Number Signal Name
522001 000A011001 S4301_STATE
5A0001 0008001F41 DCB RCV OR
5A0001 0008001F40 Traveling OR
5A0101 3100001F43 SERI_ERR
523001 000D001F40 ASEQ_MULTI_SEL
Table 3.6-3 PLC connection point (Input point on select condition logic)
Signal Number Signal Name
528001 820701ED50 LEDR01_CTRL_RIGHT
Setting Name Description
LEDDR1_EN Activate LED reset control
Control and monitoring application: Control hierarchy
Description
Command Blocking status ( Off / Blocked)
Double Command Blocking(DCB) is in progress.
Travelling events are detected.
Serious Error detected
Automatic sequence control is in progress.
Description
LED Reset control hierarchy
Table 3.6-4 Setting of LEDR
- 456 -
6F2S1915 (0.46)
.
Default Setting item or value
On Off / On
GRZ200 (Soft 031 & 032)
M/O
N/A
N/A
N/A
N/A
N/A
M/O
M