Toshiba GR200 Series Instruction Manual page 875

Figure 4.9-65 LN editing screen for SBO (for example)
Defining DIR mode
Figure 4.9-66 exemplifies the TPOS logic node saved as "GGIO2701". In the DIR mode, the
following three items should be selected using GR-TIEMS:
Figure 4.9-66 LN editing screen for DIR mode (for example)
Mapping output data
(ii)
The user should group the TPOS01 signals with regard to GOOSE and REPORT; the user
should map them for IEC61850 communication using GR-TIEMS. Figure 4.9-43 illustrates
how to map a signal; it indicates that the signals for the TPOS01 function are required to map
for IEC 61850 communication.

SBOw
 Oper

Cancel
 origin

stSeld
 sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns" )
†"sboClass" can be found by scrolling down.
 Oper

origin
 ctlmodel (choice "DOes or DOns" )
- 854 -
6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)