Toyota VIOS Owner's Manual page 70

*
1
: Move the front seat fully rearward. If the passenger seat height can be
adjusted, move it to the upper most position.
* 2
: Adjust the seatback angle to the
most upright position.
When installing a forward-facing
child seat, if there is a gap
between the child seat and the
seatback, adjust the seatback
angle
achieved.
* 3
: If the head restraint interferes with your child restraint system, and the
head restraint can be removed, remove the head restraint.
Otherwise, put the head restraint in the upper most position.
* 4
: Use only a front-facing child restraint system.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
Suitable for "universal" category child restraint system
fixed with the seat belt.
Suitable for child
recommended child restraint systems and compatibility
table (P. 72).
Suitable for i-Size and ISOFIX child restraint system.
Includes a top tether anchorage point.
Not suitable for child restraint system.
Never use a rear-facing child restraint system on the front
passenger seat.
until good contact
1-2. Child safety
restraint systems
is
69
given on
1