Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column When driving Driving, stopping and safe-driving information Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 2: Table Of Contents
TABLE OF CONTENTS Index 1-5. Refueling Before driving Opening the fuel tank cap..97 1-6. Theft deterrent system 1-1. Key information Engine immobilizer Keys ........26 system ......101 Alarm ........104 1-2. Opening, closing and locking Theft prevention labels the doors (U.S.A.)......
Page 3 2-2. Instrument cluster Interior features Gauges and meters .... 178 Indicators and warning lights ......... 181 3-1. Using the air conditioning Multi-information display system and defogger (TFT type) ......184 Automatic air conditioning Multi-information display system......266 (LCD type) ......198 Manual air conditioning system......
Page 4 TABLE OF CONTENTS Index 3-4. Using the hands-free system 3-7. Other interior features (for cellular phone) Sun visors......400 Hands-free system Vanity mirror ....... 401 (for cellular phone) ... 348 Power outlets...... 402 Using the hands-free Seat heaters ....... 405 system......
Page 5 4-3. Do-it-yourself maintenance 5-2. Steps to take in an emergency Do-it-yourself service If a warning light turns on precautions ....... 436 or a warning buzzer sounds......513 Hood ........440 If a warning message is Positioning a floor jack ..442 displayed ......
Page 6: For Owners
TABLE OF CONTENTS Index For owners Reporting safety defects for U.S. owners ..... 600 Seat belt instructions for Canadian owners (in French)......601 Index Abbreviation list ....604 Alphabetical index ... 606 What to do if..... 614...
Page 8 Pictorial index Exterior Windshield wipers Headlights (low beam) P. 215 P. 202 ∗ Headlights (high beam) Moon roof P. 93 P. 202 Outside rear view mirrors P. 87 Hood P. 440 Front side marker lights P. 202 Front turn signal lights P.
Page 9 Rear window defogger P. 281 Tail lights P. 202 Fuel filler door P. 97 Rear window wiper P. 217 Side doors P. 53 Tires License plate light P. 461 ●Rotation P. 202 P. 529 ●Replacement Back door P. 59 ●Inflation pressure P.
Page 10 Pictorial index Interior Head restraints P. 75 Seat belts P. 77 SRS driver airbag P. 110 Power window switches P. 90 SRS front passenger airbag P. 110 Floor mats Rear seats P. 72 P. 408 Glove box P. 389 Console boxes P.
Page 11 ∗ Rear seat entertainment system P. 316 SRS curtain shield airbags P. 110 Personal/interior lights P. 385, 386 Personal/interior lights Vanity mirrors P. 401 P. 385, 386 ∗ Garage door opener switches P. 411 ∗ Moon roof switches P. 93 Overhead console P.
Page 12 Pictorial index Interior Inside lock button P. 53 Door lock switch P. 53 Power window switches P. 90 Window lock switch P. 90...
Page 13 ∗ Shift lever Seat heater switches P. 170 P. 405 Shift lock override button P. 543 Auxiliary box P. 396 Console box Cup holders P. 390 P. 393 Auxiliary box P. 396 ∗ : If equipped...
Page 14 Pictorial index Instrument panel Headlight switch P. 202 Turn signal lever P. 175 ∗ Fog light switch P. 214 Windshield wipers and washer switch P. 215 Rear window wiper and washer switch P. 217 Engine (ignition) switch (vehicles with smart key system) P.
Page 15 VSC OFF switch P. 228 ∗ Power back door switch P. 60 Outside rear view mirror switches P. 87 Auxiliary box P. 396 ∗ Power back door main switch P. 61 ∗ * Telephone switch P. 351 ∗ * Audio remote control switches Talk switch P.
Page 16: Instrument Panel
Pictorial index Instrument panel With navigation system Emergency flasher Multi-information display switches switch P. 504 P. 184, 198 Audio/ navigation system Without navigation system Emergency flasher Multi-information display switches switch P. 504 P. 184, 198 Audio system P. 283...
Page 17 With automatic air conditioning system Air conditioning system P. 266 Rear window defogger switch P. 281 With manual air conditioning system Air conditioning system P. 275 Rear window defogger switch P. 281 : Refer to “Navigation System Owner’s Manual”.
Page 18 Pictorial index Luggage compartment Power outlet P. 402 ∗ Luggage cover P. 409 ∗ A/V input adapter P. 337 Luggage ∗ Power outlet compartment P. 402 light P. 386 Shopping bag Shopping bag hook P. 409 hook P. 409 Auxiliary box P.
Page 19 ∗ Power back door switch P. 59 Back door handle P. 59 ∗ : If equipped...
Page 20: For Your Information
Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehi- cle. This vehicle should not be modified with non-genuine Toyota prod- ucts.
Page 21 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle. Perchlorate Material Special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Page 22 CAUTION General precautions while driving ■ Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 23 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 25: Key Information
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles with smart key system Electronic keys • Operating the smart key system (→P. 28) • Operating wireless remote control function (→P. 43) Mechanical keys Key number plate Vehicles without smart key system Master keys Operating the wireless remote...
Page 26 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made at your Toyota dealer using the key number plate. (→P. 544) When riding in an aircraft ■...
Page 27: Smart Key System
1-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors (→P. 29) Locks and unlocks the doors (→P.
Page 28 1-2. Opening, closing and locking the doors Unlocking and locking the doors Side door handle Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.
Page 29 1-2. Opening, closing and locking the doors Back door Press the unlock button to unlock the door. The door cannot be unlocked for 3 seconds after the door is locked. Lock the back door again when you leave the vehicle. The back door will not lock automatically after it has been opened and then closed.
Page 30 1-2. Opening, closing and locking the doors Antenna location and effective range Antenna location ■ Antennas outside cabin Antennas inside cabin Antenna outside luggage com- partment...
Page 31 1-2. Opening, closing and locking the doors Effective range (areas within which the electronic key is ■ detected) When locking or unlock- ing the doors The system can be oper- ated when the electronic key is within about 2.3 ft. (0.7 m) of an outside door handle.
Page 32 1-2. Opening, closing and locking the doors Operation signals ■ A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) When the door cannot be locked using the topside sensor area ■...
Page 33 1-2. Opening, closing and locking the doors Switching the door unlock function ■ It is possible to set which doors the entry function unlocks. STEP Turn the “ENGINE START STOP” switch OFF. STEP When the indicator on the key surface is turned off, press and hold for approximately 5 seconds while pressing the key.
Page 34 1-2. Opening, closing and locking the doors Battery-saving function ■ In the following circumstances, the entry function is disabled in order to pre- vent the vehicle and electronic key batteries from discharging. When the entry function has not been used for 2 weeks or more ●...
Page 35 1-2. Opening, closing and locking the doors To operate the system properly ■ Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from outside of the vehicle.
Page 36 1-2. Opening, closing and locking the doors Even if the electronic key is not inside the vehicle, it may be possible to ● start the engine if the electronic key is near the window. The doors may unlock or lock if a large amount of water splashes on the ●...
Page 37 1-2. Opening, closing and locking the doors When the vehicle is not driven for extended periods ■ To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. Security feature ■ If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
Page 38 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The “ENGINE START STOP” switch was turned to ACCESSORY mode Turn the “ENGINE while the driver’s door was START STOP” switch open (or the driver’s door OFF and close the was opened while the Interior alarm driver’s door...
Page 39 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The electronic key has a Replace the electronic low battery key battery An attempt was made to Interior alarm start the engine without the Start the engine with pings once electronic key being the electronic key present, or the electronic...
Page 40 Starting the engine (→P. 163) ● When the electronic key battery is fully depleted ■ →P. 477 Customization that can be configured at Toyota dealer ■ Settings (e.g. smart key system) can be changed. (Customizable features →P. 590) Certification for the smart key system ■...
Page 41 (→P. 31) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
Page 42: Wireless Remote Control
1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles with smart key system Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door.
Page 43 1-2. Opening, closing and locking the doors Vehicles without smart key system Locks all doors Pressing holding: Sounds alarm (→P. 104) Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Pressing holding: Opens...
Page 44 1-2. Opening, closing and locking the doors Door lock buzzer ■ If a door or back door is not fully closed, a buzzer sounds continuously for 10 seconds if an attempt to lock the door is made. Fully close the door to stop the buzzer, and lock the vehicle once more.
Page 45 ●When a wireless key (that emits radio waves) is being used nearby ●When the wireless key has been left near an electrical appliance such as a personal computer Customization that can be configured at Toyota dealer or by the TFT ■ type multi-information display Settings (e.g.
Page 46 1-2. Opening, closing and locking the doors Certification for wireless remote control ■ For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 47 1-2. Opening, closing and locking the doors...
Page 48 1-2. Opening, closing and locking the doors...
Page 49 1-2. Opening, closing and locking the doors For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Page 50 1-2. Opening, closing and locking the doors...
Page 51 1-2. Opening, closing and locking the doors...
Page 52: Side Doors
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. Entry function (vehicles with smart key system) ■ →P. 28 Wireless remote control ■...
Page 53 1-2. Opening, closing and locking the doors Door lock switch ■ Locks all doors Unlocks all doors Inside lock button ■ Locks the door Unlocks the door The front doors can be opened by pulling the inside handles even if the lock buttons are in the lock position.
Page 54 1-2. Opening, closing and locking the doors Locking the driver’s doors from the outside without a key Move the inside lock button to the lock position. STEP Close the door. STEP Vehicles with smart key system The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle.
Page 55 1-2. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked Shifting the shift lever out of “P” locks all door locking function doors. Shift position linked Shifting the shift lever to “P”...
Page 56 1-2. Opening, closing and locking the doors Shift the shift lever to “P” or “N”, STEP press and hold the door lock switch ( ) for about 5 sec- onds then release. The shift lever and switch posi- tions corresponding desired function to be set are shown as follows.
Page 57 Depending on the force of the impact or the type of accident, however, the system may not operate. Customization that can be configured at Toyota dealer or by the TFT ■ type multi-information display Settings (e.g. unlocking function using a key) can be changed.
Page 58: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be opened using the back door opener. The back door can be locked and unlocked using the entry function (vehicles with smart key system), wireless remote control or door lock switch. In addition, the power back door (if equipped) can be opened using the power back door switch or wireless remote control.
Page 59 1-2. Opening, closing and locking the doors Opening the back door from inside the vehicle (vehicles ■ with power back door) Push and hold the switch to open/close. Pressing switch again while the power back door is operating will cause the opera- tion to reverse.
Page 60 1-2. Opening, closing and locking the doors Canceling the power back door system (vehicles with power back door) Turn the main switch to disable the power back door system. Inoperative Operative The back door cannot be oper- ated even with the wireless remote control or power back door switch.
Page 61 1-2. Opening, closing and locking the doors The power back door can be opened/closed when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode, and ● the shift lever is in “P”. The “ENGINE START STOP” switch is in OFF or ACCESSORY ●...
Page 62 1-2. Opening, closing and locking the doors CAUTION While driving ■ Keep the back door closed while driving. ● If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 63 1-2. Opening, closing and locking the doors CAUTION Operating the back door ■ Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury. Remove any heavy loads, such as snow and ice, from the back door ●...
Page 64 Doing so may cause hands to be caught or the back door damper stay to break, causing an accident. Do not attach any accessories other than genuine Toyota parts to the back ● door. Such additional weight on the back door may cause the back door to fall closed again after it is opened.
Page 65 “ON” position or the engine is started during automatic operation Do not attach any accessories other than genuine Toyota parts to the back ● door. The power back door may not operate, causing itself to malfunction, or the back door may fall closed again after it is opened.
Page 66 Do not touch the damper stay rod with ● gloves or other fabric items. Do not attach any accessories other ● Damper stay than genuine Toyota parts to the back door. Do not place your hand on the damper ● stay or apply lateral forces to it.
Page 67 1-2. Opening, closing and locking the doors NOTICE To prevent back door closer malfunction ■ Do not apply excessive force to the back door while the back door closer is operating. To prevent damage to the power back door (vehicles with power back ■...
Page 68: Adjustable Components
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Power seat Seat position fore/aft control switch Seatback angle control switch Seat cushion (front) angle control switch (driver’s side only) Vertical height control switch (driver’s side only) Lumbar support control switch Manual seat Seat position fore/aft adjust- ment lever...
Page 69 1-3. Adjustable components (seats, mirrors, steering wheel) Active head restraints When the occupant’s lower back presses against the seatback during a rear-end collision, the head restraint moves slightly for- ward and upward to help reduce the risk of whiplash on the seat occupant.
Page 70 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Seat adjustment ■ Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion ● to reduce the risk of sliding under the lap belt. If the seat is too reclined, during an accident the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury.
Page 71: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats Seatback angle adjustment lever Pull up the lever until the lock is completely released. Folding down the rear seatbacks Before folding down the rear seatbacks ■ Stow the seat belt buckles and STEP lower the head restraints to the lowest position.
Page 72 1-3. Adjustable components (seats, mirrors, steering wheel) Pass the outer seat belts and STEP plates through the seat belt hangers. This prevents the shoulder belt from being damaged. Make sure that the seat belts are removed from the hangers before using them.
Page 73 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Seat adjustment ■ Do not recline the seat more than necessary when the vehicle is in motion, to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
Page 74: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front and rear outboard seats Vertical adjustment Pull the head restraint up. Lock Down release button Push the head restraints down while pressing the lock release button.
Page 75 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the rear center seat head restraint ■ Always raise the head restraint one level from the stowed position when using. Removing the head restraints ■ Pull the head restraint up while pressing the lock release button.
Page 76: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. Correct use of the seat belts ■ Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 77 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the belt (front seats) ■ Down Move the height adjuster up and down as needed until you hear a click. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to...
Page 78 1-3. Adjustable components (seats, mirrors, steering wheel) Emergency locking retractor (ELR) ■ The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend, and you can move around fully.
Page 79 Seat belt extender ■ If your seat belts cannot be fastened securely because they are not long enough, personalized seat belt extender is available from your Toyota dealer free of charge.
Page 80 Each seat belt should be used by one person only. Do not use a seat belt ● for more than one person at the same time, including children. Toyota recommends that children should be seated in the rear seat and ● always use a seat belt and/or an appropriate child restraint system.
Page 81 Do not attempt to install, remove, modify, disassemble or dispose of a seat ● belt. Have any necessary repairs carried out by your Toyota dealer. Inap- propriate handling of the pretensioner may cause it to activate or operate improperly and may cause death or serious injury.
Page 82 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Using a seat belt extender ■ Do not wear the seat belt extender, if you can fasten the seat belt without ● the extender. Do not use the seat belt extender when installing a child restraint system, ●...
Page 83: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 84: Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Auto anti-glare inside rear view mirror In auto mode, sensors are used to detect the headlights of vehi- cles behind and automatically reduce the reflected light.
Page 85 1-3. Adjustable components (seats, mirrors, steering wheel) Manual anti-glare inside rear view mirror Normal position Anti-glare position To prevent sensor error (vehicles with auto anti-glare inside rear view ■ mirror) To ensure correct functioning of the sen- sors, do not touch or cover the sensors. CAUTION While driving ■...
Page 86: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left Folding back the mirrors Push backward to fold the mir- rors.
Page 87 1-3. Adjustable components (seats, mirrors, steering wheel) Mirror angle can be adjusted when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. When the mirrors are fogged up (vehicles with outside rear view mirror ■...
Page 88 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION While driving ■ Observe the following precautions. Failing to do so may result in losing control of the vehicle and cause an acci- dent, resulting in death or serious injury. Do not adjust the mirrors. ●...
Page 89: Power Windows
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. One-touch closing Closing One-touch opening Opening :Pressing the switch in the opposite direction will stop window travel partway. Lock switch Press the switch down to lock passenger window switches.
Page 90 1-4. Opening and closing the windows and moon roof The power windows can be operated when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. Operating the power windows after turning the engine off ■...
Page 91 1-4. Opening and closing the windows and moon roof CAUTION Closing the windows ■ Observe the following precautions. Failing to do so may result in death or serious injury. Check to make sure that all passengers do not have any part of their body ●...
Page 92: Moon Roof
1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. Opening and closing ■ Open Stops just before it is opened fully. Move the switch back- ward again to fully open.
Page 93 1-4. Opening and closing the windows and moon roof The moon roof can be operated when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. Operating the moon roof after turning the engine off ■...
Page 94 1-4. Opening and closing the windows and moon roof Moon roof open warning buzzer ■ Vehicles with smart key system The buzzer sounds and message is shown on the multi-information dis- play (TFT type only) when the “ENGINE START STOP” switch is turned off and the driver’s door is opened with the moon roof open.
Page 95: Sunshade
1-4. Opening and closing the windows and moon roof ∗ Sunshade The sunshade can be opened and closed manually. Front Slide the sunshade. The front sunshade will open automatically when the moon roof is opened. (→P. 93) Rear Slide the sunshade. ∗...
Page 96: Refueling Opening The Fuel Tank Cap
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. Before refueling the vehicle ■ Vehicles with smart key system Turn the “ENGINE START STOP” switch off and ensure that all the doors and windows are closed. Vehicles without smart key system Turn the engine switch to the “LOCK”...
Page 97 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction.
Page 98 When replacing the fuel tank cap ■ Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 99 1-5. Refueling NOTICE Refueling ■ Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface.
Page 100: Theft Deterrent System
1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles with smart key sys- tem: The indicator light flashes after the “ENGINE START...
Page 101 1-6. Theft deterrent system System maintenance ■ The vehicle has a maintenance-free type of engine immobilizer system. Conditions that may cause the system to malfunction ■ If the key is in contact with a metallic object. ● If the key is in close proximity to or touching a key to the security system ●...
Page 102 1-6. Theft deterrent system For vehicles sold in Canada ● Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. NOTICE For proper system operation ■...
Page 103: Alarm
1-6. Theft deterrent system ∗ Alarm The system sounds the alarm and flashes lights when forcible entry is detected. Triggering of the alarm ■ The alarm is triggered in the following situations. ● A locked door is unlocked or opened in any way other than by using the entry function (vehicles with smart key system), the wireless remote control door lock function or the mechanical key.
Page 104 1-6. Theft deterrent system Deactivating or stopping the alarm ■ Do one of the following to deactivate or stop the alarm. ● Unlock the doors using the entry function (vehicles with smart key system) or the wireless remote control. ● Start the engine. (The alarm will be deactivated or stopped after a few seconds.) Items to check before locking the vehicle ■...
Page 105 To stop the alarm, press any button on the wireless remote control. Vehicles without smart key system Customization that can be configured at Toyota dealer ■ Settings (e.g. time elapsed before the alarm is set) can be changed. (Customizable features →P. 590)
Page 106: Theft Prevention Labels (U.s.a.)
1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law. ITY16C012...
Page 107: Safety Information
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 108 1-7. Safety information CAUTION While driving ■ Do not adjust the position of the driver’s seat. ● Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback. ●...
Page 109: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 110 1-7. Safety information Side and curtain shield airbags Side airbags Can help protect the torso of the front seat occupants. Curtain shield airbags Can help protect primarily the head of front and rear outboard seat occupants.
Page 111 1-7. Safety information Airbag system components Front passenger airbag Side and curtain shield airbag sensor Curtain shield airbag Driver’s seat belt buckle Side airbag switch “AIR BAG ON/OFF” indicator Driver’s seat position sensor light Knee airbag Occupant detection sensor Front passenger’s seat belt Curtain shield airbag sensor buckle switch SRS warning light...
Page 112 1-7. Safety information Your vehicle is equipped with “ADVANCED AIRBAGS” designed based on US motor vehicle safety standards (FMVSS208). The air- bag system controls airbag deployment power for the driver and front passenger. The driver airbag system consists of the driver seat’s position sensor etc.
Page 113 1-7. Safety information SRS airbag deployment conditions (front airbags) ■ The SRS front airbag will deploy in the event of an impact that exceeds ● the set threshold level (the level of force corresponding to a 12 - 19 mph (20 - 30 km/h) frontal collision with a fixed wall that does not move or deform).
Page 114 1-7. Safety information Conditions under which the SRS airbags may deploy (inflate), other ■ than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. Hitting a curb, edge of pavement or ●...
Page 115 1-7. Safety information Types of collisions that may not deploy the SRS airbag ■ (side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 116 1-7. Safety information When to contact your Toyota dealer ■ In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the battery cables before contacting your Toyota dealer. Any of the SRS airbags have been inflated.
Page 117 1-7. Safety information CAUTION SRS airbag precautions ■ Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. The driver and all passengers in the vehicle must wear their seat belts ● properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 118 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 119 1-7. Safety information CAUTION SRS airbag precautions ■ Do not sit on the edge of the seat or ● lean against the dashboard. Do not allow a child to stand in front of ● the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 120 1-7. Safety information CAUTION SRS airbag precautions ■ Do not attach anything to or lean any- ● thing against areas such as the dash- board or steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy.
Page 121 Wash off any residue as soon as possible to prevent skin irritation. If the areas where the SRS airbags are stored, such as the steering wheel ● pad and front, center and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.
Page 122 Modification and disposal of SRS airbag system components ■ Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbag may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 123: Front Passenger Occupant Classification System
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger. SRS warning light Front passenger’s seat belt reminder light “AIR BAG ON”...
Page 124 1-7. Safety information Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights ON” Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front passenger seat...
Page 125 1-7. Safety information Unoccupied ■ “AIR BAG ON” and “AIR BAG OFF” Not illumi- indicator lights nated Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Activated Curtain shield airbag...
Page 126: System Malfunction
1-7. Safety information System malfunction ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights OFF” Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Curtain shield airbag Activated...
Page 127 1-7. Safety information CAUTION Front passenger occupant classification system precautions ■ Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. Wear the seat belt properly. ● Make sure the front passenger’s seat belt tab has not been left inserted ●...
Page 128 Do not kick the front passenger seat or subject it to severe impact. Other- ● wise, the SRS warning light may come on to indicate a malfunction in the detection system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the rear seat should not contact the ●...
Page 129: Child Restraint Systems
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 130 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat...
Page 131 1-7. Safety information Booster seat When installing the child restraint system on the front passenger seat ■ When you have to use a child restraint system on the front passenger seat, adjust the following: The seatback to the most upright posi- ●...
Page 132 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Toyota strongly urges the use of a proper child restraint system that con- ●...
Page 133 1-7. Safety information CAUTION Child restraint precautions ■ Do not use the seat belt extender when installing a child restraint system ● on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of an accident.
Page 134 1-7. Safety information CAUTION When the child restraint system is not in use ■ Keep the child restraint system properly secured on the seat even if it is ● not in use. Do not store the restraint unsecured in the passenger compart- ment.
Page 135: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 136 1-7. Safety information Anchor bracket (for top tether strap) Anchor brackets are provided for all rear seats. Installation with LATCH system Fold the seatback while pulling STEP the lever. Return the seatback and secure it as upright as possi- ble (1st lock position). Adjust the seatback to the 3rd lock position.
Page 137 1-7. Safety information Type A Widen the gap between STEP the seat cushion and seatback slightly. Latch the hooks of the STEP lower straps onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a STEP top tether strap, the top...
Page 138 1-7. Safety information Type B Widen the gap between STEP the seat cushion and seatback slightly. Latch the buckles onto STEP the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a STEP top tether strap, the top tether strap should be...
Page 139 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear-facing ⎯ Infant seat/convertible seat ■ Place the child restraint system STEP on the rear seat facing the rear of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle.
Page 140 1-7. Safety information Fully extend the shoulder belt STEP and then allow it to retract slightly in order to activate the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place.
Page 141 1-7. Safety information Forward-facing ⎯ Convertible seat ■ Place the child restraint system STEP on the seat facing the front of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
Page 142 1-7. Safety information Fully extend the shoulder strap STEP and then allow it to retract slightly into the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place.
Page 143 1-7. Safety information Booster seat ■ Place the booster seat on the STEP seat facing the front of the vehi- cle. Sit the child in the booster seat. STEP Fit the seat belt to the booster seat according to the manufac- turer’s instructions and insert the plate into the buckle.
Page 144 1-7. Safety information Removing a child restraint installed with a seat belt Press the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Secure the child restraint using a seat belt or lower anchors, STEP and do the following.
Page 145 1-7. Safety information Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Outside only: Adjust the head STEP restraint to the downmost posi- tion.
Page 146 1-7. Safety information CAUTION When installing a child restraint system ■ Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking or an accident.
Page 147 1-7. Safety information CAUTION When installing a child restraint system ■ When installing a child restraint system in the rear center seat, adjust both ● seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in an accident.
Page 148 1-7. Safety information CAUTION Do not use a seat belt extender ■ If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of an accident.
Page 149 1-7. Safety information...
Page 150: Driving Procedures
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. Starting the engine ■ →P. 163, 167 Driving ■ With the brake pedal depressed, shift the shift lever to “D”. STEP (→P. 170) Release the parking brake.
Page 151 2-1. Driving procedures Vehicles with smart key system: STEP Turn the “ENGINE START STOP” switch off and stop the engine. Vehicles without smart key system: Turn the engine switch to the “LOCK” position and stop the engine. Lock the door, making sure that you have the key on your STEP person.
Page 152 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodi- cally or whenever the parking brake shoes and/or drums are replaced. Have your Toyota dealer perform the bedding-down. Operating your vehicle in a foreign country ■...
Page 153 ● check that the back door is closed. Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately.
Page 154 2-1. Driving procedures CAUTION Do not under any circumstances shift the shift lever to “P” or “R” while the ● vehicle is moving. Doing so can cause significant damage to the transmission and may result in a loss of vehicle control. Do not shift the shift lever to “N”...
Page 155 2-1. Driving procedures CAUTION When driving on slippery road surfaces ■ Sudden braking, acceleration and steering may cause tire slippage and ● reduce your ability to control the vehicle, resulting in an accident. Sudden changes in engine speed, such as engine braking caused by up- ●...
Page 156 2-1. Driving procedures CAUTION When the vehicle is parked ■ Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in ● the vehicle when it is in the sun. Doing so may result in the following: • Gas may leak from a cigarette lighter or spray can, and may lead to a fire.
Page 157 ● caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 158 2-1. Driving procedures CAUTION When braking the vehicle ■ When the brakes are wet, drive more cautiously. ● Braking distance increases when the brakes are wet, and may cause one side of the vehicle to brake differently than the other side. Also the parking brake may not securely hold the vehicle.
Page 159 If you hear a squealing or scraping noise (brake pad wear limit indica- ■ tors) Have your Toyota dealer check and replace the brake pads as soon as pos- sible. The rotor damage can result if the pads are not replaced when needed.
Page 160 Engine damage caused by water immersion ● In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. Brake function ● Changes in quantity and quality of oil and fluid used for the engine, tran- ●...
Page 161: Engine (Ignition) Switch (Vehicles With Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. Starting the engine ■ Check that the parking brake is set. STEP Check that the shift lever is set in “P”.
Page 162 2-1. Driving procedures Changing “ENGINE START STOP” switch mode ■ Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) Emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can...
Page 163 When the “ENGINE START STOP” switch indicator flashes in amber ■ The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. Auto power off function ■ If the vehicle is left in ACCESSORY or IGNITION ON mode (engine is not running) for more than an hour with the shift lever in “P”, the “ENGINE...
Page 164 2-1. Driving procedures CAUTION When starting the engine ■ Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. Stopping the engine in an emergency ■...
Page 165: Engine (Ignition) Switch (Vehicles Without Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles without smart key system) Starting the engine ■ Check that the parking brake is set. STEP Check that the shift lever is set in “P”. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 166 2-1. Driving procedures Turning the key from “ACC” to “LOCK” ■ STEP Shift the shift lever to “P”. STEP Push in the key and turn to the “LOCK” position. When the steering lock cannot be released ■ When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 167 2-1. Driving procedures CAUTION When starting the engine ■ Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. While driving ■...
Page 168: Automatic Transmission
2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. Shifting the shift lever ■ Vehicles with smart key system: While the “ENGINE START STOP” switch is in IGNITION ON mode, depress the brake pedal and move the shift lever.
Page 169 2-1. Driving procedures Shift position uses ■ Shift position Function Parking the vehicle or starting the engine Reversing Neutral Normal driving “S” mode driving : To improve fuel consumption and reduce noises, set the shift lever in the “D” position for normal driving. : By selecting shift ranges using “S”...
Page 170 2-1. Driving procedures Changing shift ranges in “S” mode Shift the shift lever to the “S” position and operate the shift lever. Upshifting Downshifting The initial shift range in “S” mode is automatically set to “5” or “4” according to the vehicle’s speed. However, the initial shift range may be set to “3”...
Page 171 2-1. Driving procedures Shift ranges and their functions ■ Shift range Function Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 5 according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 4 according to vehicle speed and driving conditions.
Page 172 If the “S” indicator does not come on even after shifting the shift lever ■ to “S” This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in “D”.) AI-SHIFT ■...
Page 173: Turn Signal Lever
2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 174: Parking Brake
2-1. Driving procedures Parking brake Sets the parking brake (Depressing the pedal again releases the parking brake.) U.S.A. Canada : Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. NOTICE Before driving ■...
Page 175: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. After adjusting the steering wheel ■ Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 176: Instrument Cluster Gauges And Meters
2-2. Instrument cluster Gauges and meters Vehicles with smart key system The following gauges, meters and display illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The following gauges, meters and displays illuminate when the engine switch is in the “ON”...
Page 177: Instrument Panel Light Control
2-2. Instrument cluster Odometer/trip meter and trip meter reset button Switches between odometer and trip meter displays. Pushing and hold- ing the button will reset the trip meter when the trip meter is being dis- played. Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven.
Page 178 2-2. Instrument cluster NOTICE To prevent damage to the engine and its components ■ Do not let the indicator needle of the tachometer enter the red zone, which ● indicates the maximum engine speed. The engine may be overheating if the engine coolant temperature gauge is ●...
Page 179: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center display...
Page 180 2-2. Instrument cluster Indicators ■ The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Cruise control indicator (→P. 218) (→P. 175) Headlight high beam Slip indicator (→P. 227) indicator (→P. 203) Headlight indicator VSC OFF indicator (→P.
Page 181 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 182: Multi-Information Display (Tft Type)
2-2. Instrument cluster Multi-information display (TFT type) The multi-information display presents the driver with a variety of driving-related data, including the clock and current outside temper- ature. ● Clock (→P. 188) Indicates and sets the time. ● Outside temperature Indicates the outside temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
Page 183: Trip Information
2-2. Instrument cluster Switching the display “INFO” button “SELECT RESET” button “SETUP” button Trip information Display items can be switched by pressing the “INFO” button. Average Fuel Economy ■ Displays the average fuel consumption since the function was reset. The function can be reset by pressing and holding the “SELECT RESET” button when the average fuel economy is displayed.
Page 184 2-2. Instrument cluster Average Speed ■ Displays the average vehicle speed since the engine was started or since the function was reset. The function can be reset by pressing and holding the “SELECT RESET” button when the average speed is displayed. Trip Timer ■...
Page 185 2-2. Instrument cluster Setting up the displays Press the “SETUP” button while the vehicle is stopped. STEP The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 10 seconds, the display will revert to the previous screen.
Page 186 2-2. Instrument cluster Setting the clock ■ Select “Clock” on the “Display Settings” screen, and press the STEP “SELECT RESET” button. Press the “INFO” button to adjust STEP the hours and the “SETUP” but- ton to adjust the minutes. Press the “SELECT RESET” but- ton to set the clock.
Page 187 2-2. Instrument cluster Selecting the language ■ Select “Language” on the “Display Settings” screen, and STEP press the “SELECT RESET” button. Select the language you want to STEP read by pressing the “INFO” or “SETUP” button. Press the “SELECT RESET” but- ton to set the language.
Page 188 2-2. Instrument cluster When a 2-line layout is selected STEP , the “Layout” screen is STEP displayed. First, using the “INFO” and “SETUP” buttons, select the item you wish to display in the first line, and then press the “SELECT RESET” button. Using the “INFO”...
Page 189 2-2. Instrument cluster ● Setting the brightness Select “Brightness” STEP “Screen Settings” screen, and press the “SELECT RESET” but- ton. Press the “INFO” or “SETUP” STEP button to adjust the brightness. +: Brighter -: Darker Press the “SELECT RESET” but- ton to exit screen.
Page 190: Navigation System
2-2. Instrument cluster Press the “INFO” or “SETUP” STEP button to adjust the contrast. +: Strengthen -: Weaken Press the “SELECT RESET” but- ton to exit screen. Setting up the rear view monitor display (vehicles without ■ navigation system) Select “Screen Settings” on the “Display Settings” screen, and STEP press the “SELECT RESET”...
Page 191 2-2. Instrument cluster ● Setting the brightness Select “Brightness” STEP “Screen Settings” screen, and press the “SELECT RESET” but- ton. Press the “INFO” or “SETUP” STEP button to adjust the brightness. +: Brighter -: Darker Press the “SELECT RESET” but- ton to exit screen.
Page 192 2-2. Instrument cluster Press the “INFO” or “SETUP” STEP button to adjust the contrast. +: Strengthen -: Weaken Press the “SELECT RESET” but- ton to exit screen. ● Setting the color Select “Color” on the “Screen STEP Settings” screen, and press the “SELECT RESET”...
Page 193 2-2. Instrument cluster ● Setting the tone Select “Tone” on the “Screen STEP Settings” screen, and press the “SELECT RESET” button. Press the “INFO” or “SETUP” STEP button to adjust the tone. +: Brighter -: Darker Press the “SELECT RESET” but- ton to exit screen.
Page 194 2-2. Instrument cluster If the vehicle is moved while settings are being changed on the multi- ■ information display If the vehicle speed exceeds approxi- mately 3 mph (5 km/h) while the settings are being changed, “Please Stop Vehicle to Change Settings” will be displayed on the multi-information display, and setting mode will exit after several seconds.
Page 195 2-2. Instrument cluster When “--”, “E” or “F” is displayed on the outside temperature display ■ The system may be malfunctioning. Take your vehicle to your Toyota dealer. Outside temperature display ■ In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change.
Page 196: Multi-Information Display (Lcd Type)
2-2. Instrument cluster Multi-information display (LCD type) The multi-information display presents the driver with a variety of driving-related data, including the clock and current outside temper- ature. Type A Type B ● Clock (→P. 200) Indicates and sets the time. ●...
Page 197 2-2. Instrument cluster Switching the display “INFO-CLOCK” button “RESET-H” button “US/M-M” button Trip information Display items can be switched by pressing the “INFO-CLOCK” but- ton. Average fuel consumption (AVERAGE ECON) ■ Displays the average fuel consumption since the function was reset.
Page 198 2-2. Instrument cluster Driving range (RANGE) ■ Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. ● This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.
Page 199 When “--”, “E” or “F” is displayed on the outside temperature display ■ The system may be malfunctioning. Take your vehicle to your Toyota dealer. Outside temperature display ■ In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change.
Page 200: Operating The Lights And
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. U.S.A. The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn The headlights and all lights listed above turn on and off automati- cally.
Page 201 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. When the light switch is in position, the Automatic High Beam system will be acti- vated.
Page 202 2-3. Operating the lights and wipers Daytime running light system ■ To make your vehicle more visible to other drivers, the headlights turn on automatically (at a reduced intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night.
Page 203 2-3. Operating the lights and wipers Automatic light off system ■ Vehicles with smart key system When the headlights are on: The headlights and tail lights turn off 30 ● seconds after a door is opened and closed if the “ENGINE START STOP”...
Page 204 2-3. Operating the lights and wipers If the indicator flashes... (Vehicles with discharge headlights) ■ It may indicate a malfunction in the system. Contact your Toyota dealer. Customization that can be configured at Toyota dealer or by the TFT ■ type multi-information display Settings (e.g.
Page 205: Automatic High Beam (Vehicles With Discharge Headlights)
2-3. Operating the lights and wipers Automatic High Beam (vehicles with discharge headlights) The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary.
Page 206 2-3. Operating the lights and wipers Turning the high beam on/off manually ■ Switching to low beam Pull the lever to original posi- tion. Switching to high beam Turn the light switch to position.
Page 207 2-3. Operating the lights and wipers High beam automatic turning on or off conditions ■ When all of the following conditions are fulfilled, high beam will be automatically turned on (after approximately 1 second): ● Vehicle speed is above approximately 20 mph (32 km/h). ●...
Page 208 2-3. Operating the lights and wipers Limitations of the Automatic High Beam ■ Do not rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turning high beam on or off manually if nec- essary.
Page 209 2-3. Operating the lights and wipers In the situations below, the system may not be able to correctly detect the ● surrounding brightness levels, and may flash or expose nearby pedestri- ans to the high beam. Therefore, you should consider turning the high beam on or off manually rather than relying on the Automatic High Beam system.
Page 210 2-3. Operating the lights and wipers If the Automatic High Beam indicator flashes... ■ It may indicate a malfunction in the system. Contact your Toyota dealer. Customization that can be configured at Toyota dealer or by the TFT ■ type multi-information display The Automatic High Beam can be turned off.
Page 211 Do not install a parking tag or any other accessories near or around the ● inside rear view mirror and the camera sensor. Do not overload the vehicle. ● Do not modify the vehicle. ● Do not replace windshield with a non-genuine windshield. ● Contact your Toyota dealer.
Page 212: Fog Light Switch
2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. The fog lights can be used when the headlights are on low beam. ∗ : If equipped...
Page 213: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation (when is selected). Intermittent wiper operation Low speed wiper operation High speed wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 214 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. ITO23C081 The windshield wiper and washer can be operated when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON”...
Page 215: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer Intermittent window wiper operation Normal window wiper oper- ation Washer operation Washer/wiper dual opera- tion The rear window wiper and washer can be operated when ■ Vehicles with smart key system The “ENGINE START STOP”...
Page 216: Using Other Driving Systems
2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without using the accelerator. Indicators Cruise control switch Set the vehicle speed ■ STEP Press the “ON-OFF” switch to operate the cruise control. At this time, the cruise control indicator will come on.
Page 217 2-4. Using other driving systems Adjusting the speed setting ■ Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed can be made by lightly pushing the lever up or down and releasing it.
Page 218 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Contact your Toyota dealer, and have your Toyota inspected. CAUTION To avoid operating the cruise control by mistake ■...
Page 219: Rear View Monitor System
2-4. Using other driving systems ∗ Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle while reversing. The image is displayed in reverse on the screen. This allows the image to appear in the same manner as that of the rear view mirror.
Page 220 2-4. Using other driving systems Displayed area ■ The area covered by the camera is lim- ited. Objects which are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orientation or road conditions.
Page 221 2-4. Using other driving systems Rear view monitor system camera ■ In the following cases, it may be difficult to see the images on the screen, even when the system is functioning correctly. • In the dark (e.g. at night). •...
Page 222 ■ If the back of the vehicle is hit, the camera’s position and mounting angle ● may change. Contact your Toyota dealer. Rapid temperature changes, such as when hot water is poured on the ● vehicle in cold weather, may cause the system to function abnormally.
Page 223: Hill-Start Assist Control
2-4. Using other driving systems Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
Page 224 • The parking brake is applied. • The brake pedal is depressed again. If the slip indicator comes on... ■ It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION Hill-start assist control ■ Do not overly rely on hill-start assist control. Hill-start assist control may ●...
Page 225: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ABS (Anti-lock Brake System) ■...
Page 226 2-4. Using other driving systems Active Torque Control 4WD (if equipped) ■ Automatically switches from front-wheel drive to AWD (All-Wheel Drive) according to driving conditions, helping to ensure reliable handling and stability. Examples of conditions where the system will switch to AWD are when cornering, going uphill, starting off or accelerating, and when the road surface is slippery due to snow or rain etc.
Page 227 2-4. Using other driving systems To disable TRAC and/or VSC If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. Turning off TRAC ■...
Page 228 2-4. Using other driving systems Automatic reactivation of TRAC and VSC ■ Vehicles with smart key system Turning the “ENGINE START STOP” switch off after turning off the TRAC and VSC will automatically re-enable them. Vehicles without smart key system Turning the engine switch to the “LOCK”...
Page 229 2-4. Using other driving systems EPS operation sound ■ When the steering wheel operates, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. Reduced effectiveness of EPS ■ The effectiveness of EPS is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time.
Page 230 In addition, make sure that the tires are inflated to the speci- fied tire pressure level. The ABS and VSC will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and suspension ■...
Page 231: Driving Information
2-5. Driving information Utility vehicle precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity. Utility vehicle feature ● Specific design characteristics give it a higher center of gravity than ordinary passenger cars.
Page 232 2-5. Driving information CAUTION Utility vehicle precautions ■ Always observe the following precautions to help minimize the risk of serious personal injury or damage to your vehicle: In a rollover crash, an unbelted person is significantly more likely to die ●...
Page 233 2-5. Driving information Off-road driving Your vehicle is not designed to be driven off-road. However, in the event that off-road driving cannot be avoid, please observe the fol- lowing precautions to help avoid the areas prohibited to vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 234 2-5. Driving information CAUTION Off-road driving precautions ■ Always observe the following precautions to help minimize the risk of serious personal injury or damage to your vehicle: Drive carefully when off the road. Do not take unnecessary risks by driving ●...
Page 235 2-5. Driving information NOTICE To prevent the water damage ■ Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. Water entering the engine air intake will cause severe engine damage. ●...
Page 236: Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment when- ever possible. Be sure all items are secured in place. ●...
Page 237 2-5. Driving information Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) Steps for Determining Correct Load Limit— (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.”...
Page 238 2-5. Driving information Example on your vehicle Cargo capacity Total load capacity When 2 people with the combined weight of 366 lb. (166 kg) are riding in your vehicle, which has a total load capacity of 825 lb. (370 kg), the available amount of cargo and luggage load capacity will be as follows: 825 lb.
Page 239 2-5. Driving information CAUTION Things that must not be carried in the luggage compartment ■ The following things may cause a fire if loaded in the luggage compart- ment. Receptacles containing gasoline ● Aerosol cans ● Storage precautions ■ Observe the following precautions. Failing to do so may result in death or serious injury.
Page 240 2-5. Driving information CAUTION Weight of the load ■ Do not exceed the maximum axle weight rating or the total vehicle ● weight rating. Even if the total load of occupant’s weight and the cargo load is less ● than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.
Page 241: Vehicle Load Limits
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. Total load capacity: 825 lb. (370 kg) ■ Total load capacity means the combined weight of occupants, cargo and luggage. Seating capacity: 5 occupants (Front 2, Rear 3) ■...
Page 242 2-5. Driving information Total load capacity and seating capacity ■ These details are also described on the tire and loading information label. (→P. 468) CAUTION Overloading the vehicle ■ Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident.
Page 243: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. Pre-winter preparations ■ ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 244 2-5. Driving information Before driving the vehicle ■ Perform the following according to the driving conditions. ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
Page 245 2-5. Driving information Selection tire chains Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. Side chain: 0.12 in. (3.0 mm) 1.18 in. (30.0 mm) 0.39 in. (10.0 mm) Cross chain: 0.16 in.
Page 246 2-5. Driving information CAUTION Driving with snow tires ■ Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury. Use tires of the size specified for your vehicle. ●...
Page 247 NOTICE Repairing or replacing snow tires ■ Request repairs of and obtain replacement snow tires from Toyota deal- ers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters.
Page 248: Trailer Towing
The vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional...
Page 249 2-5. Driving information Weight limits Confirm that the gross trailer weight, gross vehicle weight, gross axle weight and trailer tongue load are all within the limits. ● The gross trailer weight must never exceed towing capacity described below. With towing package: 2GR-FE engine 3500 lb.
Page 250 2-5. Driving information Towing related term Meaning The maximum allowable gross axle GAWR (Gross Axle Weight weight. Rating) The gross axle weight is the load placed on each axle (front and rear). The sum of the trailer weight and the Gross trailer weight weight of the cargo in the trailer.
Page 251 2-5. Driving information Trailer tongue load ● A recommended tongue load varies in accordance with the types of trailers or towing as described below. ● In order to ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. The trailer cargo load should be distributed so that the tongue load is 9 to 11 % of the gross trailer weight.
Page 252 2-5. Driving information Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer. Even though the vehicle may be rated for towing a higher weight, the operator must never exceed the maxi- mum weight rating specified for the trailer hitch. Selecting trailer ball Use the correct trailer ball for your application.
Page 253 2-5. Driving information Trailer towing tips Your vehicle will handle differently when towing a trailer. The 3 main causes of vehicle-trailer accidents are driver error, excessive speed and improper trailer loading. Keep the following in mind when towing. ● Before starting out, check the trailer lights and the vehicle-trailer connections.
Page 254 2-5. Driving information ● Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a larger than normal turning radius. ● Crosswinds and rough roads will adversely affect handling of your vehicle and trailer, causing sway.
Page 255 2-5. Driving information ● Always place wheel blocks under both the vehicle and the trailer wheels when parking. Apply the parking brake firmly, and put the transmission in “P”. Avoid parking on a slope, but if unavoidable, do so only after performing the following: Apply the brakes and keep them applied.
Page 256 2-5. Driving information Matching trailer ball height to trailer coupler height ■ No matter which class of tow hitch applies, for a safe trailer hookup, the trailer ball setup on must be proper height for the coupler on the trailer. Coupler Trailer ball Before towing...
Page 257 ■ If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential and wheel bearing), Toyota recommends that you do not tow a trailer until it has been driven for over 500 miles (800 km).
Page 258 Do not tow the vehicle with the compact spare tire installed. ● Hitches ■ If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight requirement. ●...
Page 259 NOTICE When installing a trailer hitch ■ Use only the position recommended by your Toyota dealer. Do not install ● the trailer hitch on the bumper; this may cause body damage. Do not use axle-mounted hitches, as they can cause damage to the axle ●...
Page 260: Dinghy Towing
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with four wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle ■ Do not tow your vehicle with four wheels on the ground.
Page 261 2-5. Driving information...
Page 262: Using The Air Conditioning System And Defogger
3-1. Using the air conditioning system and defogger Automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Fan speed Changes the air Driver’s side temperature control outlets used dial and automatic mode switch Passenger’s side temperature control dial...
Page 263 3-1. Using the air conditioning system and defogger Multi-information display (TFT type) Automatic mode indicator Airflow display Driver’s side Passenger’s side temperature temperature setting display setting display Air conditioning on indicator Fan speed display The settings display will differ according to the situation. If pressed while in automatic mode, the status of all settings will be dis- played for a number of seconds.
Page 264 3-1. Using the air conditioning system and defogger Using the automatic mode Press STEP The air conditioning system will begin to operate. In outside air or recirculated air mode, air outlets, fan speed and air conditioning on/ off are automatically adjusted according to the temperature setting. “AUTO”...
Page 265 3-1. Using the air conditioning system and defogger Adjusting the fan speed ■ Press “∧” (increase) or “∨” (decrease) on The fan speed is shown on the display. (7 levels) Press to turn the fan off. Changing the air outlets ■...
Page 266 3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. Mainly air flows to the feet. Air flows to the feet and the windshield defogger operates. Switching between outside air and recirculated air modes ■...
Page 267 3-1. Using the air conditioning system and defogger Defogging the windshield Press The air conditioning system con- trol operates automatically. Recirculated air mode will auto- matically switch to outside air mode. It is not possible to return to recirculated air mode when the switch is on.
Page 268 3-1. Using the air conditioning system and defogger Front side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. Rear center outlets Direct air flow to the left or right, up or down.
Page 269 3-1. Using the air conditioning system and defogger Using the automatic mode ■ Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions. As a result, the following may occur. The system may switch automatically to recirculated air mode when the ●...
Page 270 3-1. Using the air conditioning system and defogger CAUTION To prevent the windshield from fogging up ■ Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 271: Manual Air Conditioning System
3-1. Using the air conditioning system and defogger Manual air conditioning system Control panel Changes the air outlets used Temperature control dial Fan speed control dial Windshield defogger Outside air or recirculated air mode Air conditioning on/off switch Multi-information display Airflow display Temperature Fan speed...
Page 272 3-1. Using the air conditioning system and defogger Adjusting the settings Adjusting the temperature setting ■ Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). is not pressed, the system will blow ambient temperature air or heated air. For quick cooling, turn the temperature selector knob to the “MAX A/C”...
Page 273 3-1. Using the air conditioning system and defogger Air flows to the upper body. Air flows to the upper body and feet. Mainly air flows to the feet. Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode.
Page 274 3-1. Using the air conditioning system and defogger Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time the button is pressed. If the ambient temperature drops, the mode will automatically change from recirculated air mode to outside air mode after a few minutes.
Page 275 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Front center outlets Direct air flow to the left or right, up or down. Front side outlets Direct air flow to the left or right, up or down.
Page 276 3-1. Using the air conditioning system and defogger Using the system in recirculated air mode ■ The windows will fog up more easily if the recirculated air mode is used for an extended period. Window defogger feature ■ Recirculated air mode may automatically switch to outside air mode in situa- tions where the windows need to be defogged.
Page 277: Rear Window Defogger
3-1. Using the air conditioning system and defogger Rear window defogger Clear the rear window using the defogger. With automatic air conditioning system On/off The defogger will automatically turn off after 15 or 60 minutes. This operation time changes according to the ambient tem- perature and vehicle speed.
Page 278 3-1. Using the air conditioning system and defogger The rear window defogger can be operated when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. Outside rear view mirror defoggers and windshield wiper de-icer (if ■...
Page 279: Using The Audio System
3-2. Using the audio system Audio system type With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner’s Manual”. Without navigation system Type A: CD player with changer and AM/FM radio...
Page 280 3-2. Using the audio system Type B: CD player with changer and AM/FM radio Type C: CD player and AM/FM radio (with CD changer control- ler)
Page 281 3-2. Using the audio system Title Page Using the radio P. 287 Using the CD player P. 294 Playing back MP3 and WMA discs P. 302 Optimal use of the audio system P. 310 Using the AUX adapter P. 312 Using the steering switches P.
Page 282 3-2. Using the audio system CAUTION For vehicles sold in the U.S.A. ■ Part 15 of the FCC Rules ● FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. Laser products ●...
Page 283: Using The Radio
3-2. Using the audio system Using the radio Press to choose either an AM or FM band. Power Volume Station selector Adjusting Scanning for receivable frequency stations Seeking the frequency Changing the program type AM·SAT/FM mode buttons...
Page 284 3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) Search for desired stations by turning or press- STEP ing “∧” or “∨” on Press and hold the button (from ) the sta- STEP tion is to be set to, and you hear a beep. ®...
Page 285 3-2. Using the audio system ® Satellite Radio (if equipped) ® Receiving XM Satellite Radio ■ Press until “SAT” shows in the display. STEP The display changes as follows each time the button is pressed. “AM” → “SAT1” → “SAT2” → “SAT3” Turn to select a desired channel from all the cat- STEP...
Page 286 3-2. Using the audio system ® Scanning XM Satellite Radio channels ■ ● Scanning channels in the current category Press STEP When the desired channel is reached, press the button STEP again. ● Scanning preset channels Press and hold until you hear a beep. STEP When the desired channel is reached, press the button STEP...
Page 287 3-2. Using the audio system Reception sensitivity ■ Maintaining perfect radio reception at all times is difficult due to the con- ● tinually changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc. The radio antenna is mounted inside the rear window.
Page 288 XM antenna cable is attached securely. ANTENNA There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryp- ®...
Page 289 3-2. Using the audio system There is no song/program title or artist name/fea- ----- ture associated with the channel at that time. No action needed. The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”.
Page 290: Using The Cd Player
3-2. Using the audio system Using the CD player Insert a CD or press with a CD inserted. Power Volume CD eject CD selection (with a CD changer) CD slot CD insert Random playback (type A and B) Repeat play Reverse Fast-forward Search...
Page 291 3-2. Using the audio system Loading a CDs Loading a single CD ■ Type A and B Press STEP Insert a CD when the indicator on the slot turns from amber to STEP green. Type C Insert a CD. Loading multiple CDs (type A and B) ■...
Page 292 3-2. Using the audio system Ejecting CDs Ejecting a CD ■ Type A and B To select the CD to be ejected, press (∨ DISC) or STEP (DISC ∧). The number of the CD selected is shown on the display. Press and remove the CD.
Page 293 3-2. Using the audio system Selecting a track Press “∧” to move up or “∨” to move down using until the desired track number appears on the display. Fast forwarding and rewinding tracks Press and hold (rewind) or (fast forward). Scanning a CD Press STEP...
Page 294 3-2. Using the audio system Repeating a track or a disc Repeating a track ■ Press (RPT). Repeating a disc (type A and B) ■ Press and hold (RPT) until you hear a beep. Switching the display Press Each time the button is pressed, the display changes in the order of Track no./Elapsed time →...
Page 295 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. Discs that can be used ■ Discs with the marks shown below can be used.
Page 296 3-2. Using the audio system NOTICE CDs and adapters that cannot be used ■ Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Disc. Doing so may damage the player and/or the CD insert/eject function. CDs that have a diameter that is not 4.7 ●...
Page 297 3-2. Using the audio system NOTICE Player precautions ■ Failure to follow the precautions below may result in damage to the CDs or the player itself. Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the player. ●...
Page 298: Playing Back Mp3 And Wma Discs
3-2. Using the audio system Playing back MP3 and WMA discs Insert an MP3 or WMA disc or press with a disc inserted. CD selection Power Volume CD eject (with a CD changer) Random playback CD slot Reverse Repeat play CD insert (type A and B)
Page 299: System
3-2. Using the audio system Selecting and scanning a folder Selecting folders one at a time ■ Press “∧” or “∨” on to select the desired folder. To return to the first folder, press and hold “∨” on until you hear a beep.
Page 300 3-2. Using the audio system Random playback To play files from a particular folder in random order ■ Press (RAND). To play all of the files on a disc in random order ■ Press and hold (RAND) until you hear a beep. Repeating a file or a folder Repeating a file ■...
Page 301 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. “NO MUSIC”: This indicates that the MP3/WMA file is not included in the Discs that can be used ■...
Page 302 3-2. Using the audio system Lens cleaners ■ →P. 299 MP3 and WMA files ■ MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format.
Page 303 3-2. Using the audio system WMA file compatibility ● • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver.
Page 304 3-2. Using the audio system File names ● The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. Multi-sessions ● As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files.
Page 305 3-2. Using the audio system Extensions ● If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 306: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set- tings • Sound quality and vol- ume balance The sound quality and bal- ance setting changed to produce the best sound. •...
Page 307 3-2. Using the audio system Adjusting sound quality ■ Turning adjusts the level. Sound quality Mode Turn to the Turn to the Level mode displayed left right Low-pitched -5 to 5 tones Mid-pitched -5 to 5 High tones High pitched -5 to 5 tones Front/rear...
Page 308: Using The Aux Adapter
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it using the vehicle’s speakers. Open the cover and connect STEP the portable audio device. Press STEP Operating portable audio devices connected to the audio system ■...
Page 309: Using The Steering Switches
3-2. Using the audio system Using the steering switches Some audio features can be controlled using the switches on the steering wheel. Volume Radio: Select radio stations CD: Select tracks, files, discs and folders Power on, select audio source Turning on the power Press when the audio system is turned off.
Page 310 3-2. Using the audio system Adjusting the volume Press “+” on to increase the volume and “-” to decrease the volume. Hold down the button to continue increasing or decreasing the volume. Selecting a radio station Press to select the radio mode. STEP Press “∧”...
Page 311: Selecting A Folder
3-2. Using the audio system Selecting a folder Press to select the CD mode. STEP Press and hold “∧” or “∨” on until you hear a beep. STEP Selecting a disc in the CD player (with a CD changer) Press to select the CD mode.
Page 312: Rear Seat Entertainment System Features
3-3. Using the rear seat entertainment system ∗ Rear seat entertainment system features The rear seat entertainment system is designed for the rear passen- gers to enjoy audio and DVD video separately from the front audio system. Front audio system Display DVD player Rear seat entertainment system controller...
Page 313 3-3. Using the rear seat entertainment system Opening and closing the display Press the lock release button to open the display. Pull the display down to an easily viewable angle (between 90° and 125°). To close the display, push the display up until a click is heard.
Page 314 3-3. Using the rear seat entertainment system Ejecting a disc Press and remove the disc. The rear seat entertainment system can be used when ■ Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 315 DVD ERROR: Indicates that there is a problem inside the player. Eject the disc. Set the disc again. If the malfunction still exists, take the vehicle to your Toyota dealer. Before using the controller (for new vehicle owners) ■...
Page 316 The operational range is reduced. ● When using AA batteries ■ Batteries can be purchased at your Toyota dealer, electric appliance shop, or camera stores. Replace only with the same or equivalent type recommended by a Toyota dealer. Dispose of used batteries according to the local laws.
Page 317 3-3. Using the rear seat entertainment system Volume ■ Adjust the volume when you use the headphones. Loud sounds may have ● a significant impact on the human body. Conversational speech on some DVDs is recorded at a low volume to ●...
Page 318 3-3. Using the rear seat entertainment system NOTICE Cleaning the display ■ Wipe the display with a dry soft cloth. If the screen is wiped with a rough cloth, the surface of the screen may be scratched. To prevent damage to the remote controller ■...
Page 319: Using The Rear Seat
3-3. Using the rear seat entertainment system Using the DVD player (DVD video) Controller ■ Turning on the DVD mode Turning on or off the opera- tion switches (icon) on the display Selecting a chapter Reversing a disc Turning on the menu screen Turning on the title selection screen Searching the title...
Page 320 3-3. Using the rear seat entertainment system Display (page 1) ■ Turning off the operation switches (icon) on the dis- play Displaying page 2 Turning on or off the title selection screen for the disc Turning on or off the menu screen for the disc Reversing a disc Stopping a disc...
Page 321 3-3. Using the rear seat entertainment system Turning on or off the operation switches Press to turn on the operation switches. Press once again or select to turn off the operation switches. Turning on the title selection screen Press or select to turn on the title selection screen.
Page 322 3-3. Using the rear seat entertainment system Searching for a title Press or select display the screen to search for a title. Select the title number, and press to input it. Select to return to the previ- ous screen. Changing the subtitle language Press or select display the subtitle language...
Page 323 3-3. Using the rear seat entertainment system Changing the audio language Press or select display audio language screen. Each time is pressed or is selected, another lan- guage stored on the disc is selected. Select to return to the previ- ous screen.
Page 324 3-3. Using the rear seat entertainment system Region codes ■ Some DVD video discs have a region code indicating where you can use them. If the DVD video disc is not labeled “ALL” or “1”, you cannot use it in this DVD player.
Page 325 3-3. Using the rear seat entertainment system DVD video disc information ■ DVD video discs ● Digital Versatile Disc that holds video. DVD video discs have adopted “MPEG2”, one of the world standards of digital compression technolo- gies. The picture data is compressed by 1/40 on average and stored. Variable rate encoding technology in which the volume of data assigned to the picture is changed depending on the picture format has also been adopted.
Page 326 3-3. Using the rear seat entertainment system Viewer restrictions ● This feature limits what can be viewed in conformity with the level of restrictions of the country. The level of restrictions varies depending on the DVD video disc. Some DVD video discs cannot be played at all, or violent scenes are skipped or replaced with other scenes.
Page 327 3-3. Using the rear seat entertainment system Sound ■ Dolby Digital ● Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved. ● “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater System, Inc.
Page 328: Using The Dvd Player (Video Cd)
3-3. Using the rear seat entertainment system Using the DVD player (video CD) Controller ■ Turning on or off the opera- tion switches (icon) on the display Selecting a chapter Playing/pausing a disc Reversing a disc Displaying operation switches (icon) Inputting selected switch (icon)
Page 329 3-3. Using the rear seat entertainment system Display (page 1) ■ Selecting a disc menu num- Turning off the menu screen Displaying page 2 Turning on the disc menu Returning to the previous page screen (with the disc menu displayed) Proceeding to the next page screen (with the disc menu displayed)
Page 330: Using The Dvd Player (Audio Cd/Cd Text)
3-3. Using the rear seat entertainment system Using the DVD player (audio CD/CD text) Using the control screen ■ Press to display the control screen. Repeat play Random playback Search playback Canceling random, repeat and scan play ■ Select again.
Page 331: Using The Dvd Player (Mp3 Discs)
3-3. Using the rear seat entertainment system Using the DVD player (MP3 discs) Using the control screen ■ Press to display the control screen. Repeat play Random playback Search playback Displaying file information Selecting a folder Repeat play Repeat a file ■...
Page 332 3-3. Using the rear seat entertainment system Search playback Selecting the desired file by cueing the files in the folder ■ Select The player will scan all the files in the folder. Each file will be played for 10 seconds. Selecting the desired file by cueing the folders on the disc ■...
Page 333: Using The Video Mode
3-3. Using the rear seat entertainment system Using the video mode Press to select the video mode. Before switching to the video mode, connect the audio-video equipment to the A/V input adapter. Using the adapter Open the cover. The A/V input adapter is com- posed of 3 input adapters.
Page 334 3-3. Using the rear seat entertainment system A/V input adapter ■ The rear seat entertainment system plays videos and sound when audio- video equipment is connected to the A/V input adapter. For details, refer to the manufacturer’s instructions. Power outlet ■...
Page 335: Changing The Initial Settings
3-3. Using the rear seat entertainment system Changing the initial settings Press or select display initial setting screen. The following initialization can be changed here. ● Audio language ● Subtitle language ● DVD language ● Angle mark ● Parental lock...
Page 336 3-3. Using the rear seat entertainment system Changing the audio language Select “Audio Language”. Select the language you want to hear, and press to input it. Select “Others” if you cannot find the language you want to hear. Enter the appropriate 4-digit lan- guage code.
Page 337 3-3. Using the rear seat entertainment system Select “Others” if you cannot find the language you want to read. Enter the appropriate 4-digit lan- guage code. (→P. 344) Select a number, and press to input it. If a code that is not in the list is entered, “Incorrect Code”...
Page 338 3-3. Using the rear seat entertainment system Turning on or off the angle mark The angle mark can be turned on for discs that are multi-angle com- patible. Each time you press when “Angle Mark” is selected, the angle mark turns on or off alternately.
Page 339 3-3. Using the rear seat entertainment system Setting the display mode Pressing changes the dis- play modes sequentially as fol- lows: Normal→Wide 1 →Wide 2...
Page 340 3-3. Using the rear seat entertainment system Returning to the previous screen ■ Select , and press To initialize the password ■ Press on the remote controller 10 times when the screen to enter the per- sonal code is displayed. Language code list ■...
Page 341 3-3. Using the rear seat entertainment system Code Language Code Language Code Language 0125 Aymara 0615 Faroese 1111 Kazakh Greenlan- 0126 Azerbaijani 0625 Frisian 1112 0201 Bashkir 0701 Irish 1113 Cambodian Byelorus- Scots- 0205 0704 1114 Kannada sian Gaelic 1119 Kashmiri 1415 Norwegian...
Page 342 3-3. Using the rear seat entertainment system Code Language Code Language Code Language 1320 Maltese 1909 Sinhalese 2015 Tonga 1325 Burmese 1911 Slovak 2018 Turkish 1401 Nauru 1912 Slovenian 2019 Tsonga 1405 Nepali 1913 Samoan 2020 Tatar Vietnam- 2023 2209 2515 Yoruba 2111...
Page 343 3-3. Using the rear seat entertainment system “-” or “Red” “+” or “Green” Brightness Darkens Brightens Strengthens the con- Contrast Weakens the contrast trast Tone Weakens the tone Strengthens the tone Strengthens the red Strengthens the green Color color color : Color and tone can be adjusted while a DVD video, video CD or similar is being shown.
Page 344: Using The Hands-Free System
3-4. Using the hands-free system (for cellular phone) ∗ Hands-free system (for cellular phone) With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner’s Manual”. Without navigation system ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 345 3-4. Using the hands-free system (for cellular phone) ® About Bluetooth ■ Bluetooth is a registered trademark of Bluetooth SIG. Inc. Compatible models ■ Compatible with HFP (Hands Free Profile) Ver. 1.0 and OPP (Object Push Profile) Ver. 1.1. ® If your cellular phone does not support HFP, you cannot enter the Bluetooth phone, and take OPP service individually.
Page 346 3-4. Using the hands-free system (for cellular phone) CAUTION While driving ■ ® Do not use a cellular phone, or connect the Bluetooth phone. NOTICE To prevent damage to a cellular phone ■ Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.
Page 347: Using The Hands-Free System
3-4. Using the hands-free system (for cellular phone) Using the hands-free system Audio unit ■ Displays such items as message, name, and phone number Lower-case characters and special characters, such as an umlaut, cannot be dis- played. Selects speed dials Push and hold: Displays information that is too long to be displayed at one time...
Page 348 3-4. Using the hands-free system (for cellular phone) Steering wheel ■ Volume The voice guidance volume cannot be adjusted by using this button. Hands-free phone system on/starts a call Hands-free phone system off/ends a call/refuses a call Press: Voice command sys- tem on Press and hold: Voice com- mand system off...
Page 349 3-4. Using the hands-free system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands- free system without checking the display or operating Operation procedure when using a voice command ■...
Page 350 3-4. Using the hands-free system (for cellular phone) Press STEP The introductory guidance and phone name registration instructions are heard. Register a phone name by either of the following methods. STEP a. Select “Record Name” by using , and say a name to be registered.
Page 351 3-4. Using the hands-free system (for cellular phone) Menu list of the hands-free system Normal operation ■ Second First menu Third menu Operation detail menu Dialing a number stored in ⎯ ⎯ Callback the incoming call history memory Dialing a number stored in ⎯...
Page 352 3-4. Using the hands-free system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Lock Locking the phone book Security Phonebook Unlocking the phone book Unlock Registering a cellular phone Pair Phone to be used Changing a registered name Change Name...
Page 353 3-4. Using the hands-free system (for cellular phone) Using a short cut key ■ First menu Second menu Operation detail Dialing a number registered ⎯ Dial “XXX (name)” in the phone book Phone book add ⎯ Adding a new number entry Phone book change Changing a name of a phone...
Page 354 3-4. Using the hands-free system (for cellular phone) Automatic adjustment of volume ■ When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. When using a voice command ■...
Page 355: Making A Phone Call
3-4. Using the hands-free system (for cellular phone) Making a phone call Making a phone call ■ ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redial”...
Page 356 3-4. Using the hands-free system (for cellular phone) Dialing by inputting a number Press and say “Dial by number”. STEP Press and say the phone number. STEP Dial by one of the following methods: STEP a. Press b. Press and say “Dial”. c.
Page 357 3-4. Using the hands-free system (for cellular phone) Dial by one of the following methods: STEP a. Press b. Press and say “Dial”. c. Select “Dial” by using Speed dialing Press STEP Press the preset button in which the desired number is regis- STEP tered.
Page 358 3-4. Using the hands-free system (for cellular phone) Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods: Operate the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.
Page 359 3-4. Using the hands-free system (for cellular phone) Using the call history memory Follow the procedure below to use a number stored in the call history memory: Press and say “Redial” (when using a number stored STEP in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory).
Page 360 3-4. Using the hands-free system (for cellular phone) The following operations can be performed: Dialing: Press or select “Dial” by using a voice command or Storing the number in the phone book: Select “Store” by using a voice command or Deleting: Select “Delete”...
Page 361: Setting A Cellular Phone
3-4. Using the hands-free system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free system allows the system to function. The following functions can be used for regis- tered cellular phones: Functions and operation procedures ■...
Page 362 3-4. Using the hands-free system (for cellular phone) Registering a cellular phone Select “Pair Phone” by using a voice command or , and do the procedure for registering a cellular phone. (→P. 353) Selecting a cellular phone to be used Select “Select Phone”...
Page 363 3-4. Using the hands-free system (for cellular phone) Changing a registered name Select “Change Name” by using a voice command or STEP Select a name of cellular phone to be changed by either of the STEP following methods: a. Press and say the desired phone name, and select “Confirm”...
Page 364 3-4. Using the hands-free system (for cellular phone) Listing the registered cellular phones Selecting “List Phones” by using a voice command or causes the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing while a name of cellular phone is being read selects the cellular phone, and the following functions will be available:...
Page 365 3-4. Using the hands-free system (for cellular phone) Deleting a cellular phone Select “Delete” by using a voice command or STEP Pattern A Select the cellular phone to be deleted by either of the follow- STEP ing methods and select “Confirm” by using a voice command a.
Page 366 3-4. Using the hands-free system (for cellular phone) Changing the passkey Select “Set Passkey” by using a voice command or STEP Pattern A Press , say a 4 to 8-digit number, and select “Confirm” STEP by using a voice command or Pattern B Select a 4 to 8-digit number by using STEP...
Page 367: Security And System Setup
3-4. Using the hands-free system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: Security setting items and operation procedure ■ ● Setting or changing the PIN (Personal Identification Number) 1. “Setup” → 2. “Security” → 3. “Set PIN” ●...
Page 368 3-4. Using the hands-free system (for cellular phone) Setting or changing the PIN Setting a PIN ■ Select “Set PIN” by using a voice command or STEP Enter a PIN by using a voice command or STEP When using , input the code 1 digit at a time. Changing the PIN ■...
Page 369 3-4. Using the hands-free system (for cellular phone) Locking or unlocking the phone book Select “Phonebook Lock (Phbk Lock)” or “Phonebook Unlock STEP (Phbk Unlock)” by using a voice command or Input the PIN by either of the following methods and select STEP “Confirm”...
Page 370 3-4. Using the hands-free system (for cellular phone) Initialization Select “Initialize” and then “Confirm” by using STEP Select “Confirm” by using a voice command or STEP again. Initialization ■ The following data in the system can be initialized: ● • Phone book •...
Page 371: Using The Phone Book
3-4. Using the hands-free system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook” → 2. “Add Entry” ● Setting speed dial 1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)” ●...
Page 372 3-4. Using the hands-free system (for cellular phone) Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone ●...
Page 373 3-4. Using the hands-free system (for cellular phone) Transferring data from the cellular phone STEP2-1 Select “By Phone” and then “Confirm” by using a voice command or STEP2-2 Transfer the data from the cellular phone. Refer to the manual that comes with the cellular phone for the details of transferring data.
Page 374 3-4. Using the hands-free system (for cellular phone) Selecting a phone number from outgoing or incoming call history STEP2-1 Select “Call History” by using a voice command or STEP2-2 Select “Outgoing” or “Incoming” by using a voice command or STEP2-3 Select the data to be registered by either of the fol- lowing methods: a.
Page 375 3-4. Using the hands-free system (for cellular phone) Select the name to be registered by either of the following STEP methods, and select “Confirm” by using a voice command or a. Press and say the desired name. b. Select “Record Name” by using , and say the desired name.
Page 376 3-4. Using the hands-free system (for cellular phone) Select the data to be registered as a speed dial by either of STEP the following methods: a. Press , say desired number, and select “Confirm” by using a voice command or b.
Page 377 3-4. Using the hands-free system (for cellular phone) Changing a registered name Select “Change Name” by using a voice command or STEP Select the name to be changed by either of the following STEP methods. a. Press , say desired name, and select “Confirm” by using a voice command or b.
Page 378 3-4. Using the hands-free system (for cellular phone) Deleting registered data Select “Delete Entry” by using a voice command or STEP Pattern A Select the data to be deleted by either of the following meth- STEP ods, and select “Confirm” by using a voice command or a.
Page 379 3-4. Using the hands-free system (for cellular phone) Deleting speed dials Select “Delete Speed Dial (Del Spd Dial)” by using a voice STEP command or Press the preset button in which the desired speed dial is reg- STEP istered, and select “Confirm” by using a voice command or Listing the registered data Selecting “List names”...
Page 380: Using The Interior Lights
3-5. Using the interior lights Interior lights list Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Due to the function of the system, the lights shown in the following illustration automatically turn on/off accord-...
Page 381: Personal/Interior Light Main Switch
3-5. Using the interior lights Personal/interior light main switch Personal/interior lights “ENGINE START STOP” switch light (vehicles with smart key system) or engine switch light (vehicles without smart key sys- tem) Door courtesy lights Luggage compartment light Personal/interior light main switch “OFF”...
Page 382: Personal/Interior Lights And Luggage Compartment Light
3-5. Using the interior lights Personal/interior lights and luggage compartment light Personal/interior lights Front On/off The illuminated entry system is activated even if the light is turned off when the personal/inte- rior light main switch is in door position. Rear On/off The illuminated entry system is activated even if the light is...
Page 383 20 minutes. Customization that can be configured at Toyota dealer or by the TFT ■ type multi-information display Settings (e.g.
Page 384: Using The Storage Features
3-6. Using the storage features List of storage features Bottle holders Door pockets Auxiliary boxes Overhead console Console boxes Glove box Cup holders...
Page 385: Glove Box
3-6. Using the storage features Glove box Glove box Pull up the lever. Glove box light ■ The glove box light turns on when the tail lights are on. CAUTION While driving ■ Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.
Page 386: Console Boxes
3-6. Using the storage features Console boxes Console boxes Front Press the tab and slide to open. Rear Pull up the lever to release the lock. Slide the armrest fully rear- ward. Lift the armrest to open.
Page 387 3-6. Using the storage features Console boxes When using the rear console box lid as an armrest ■ If necessary, the console box lid can slide forward. Pull the lid forward while pulling up the lever. Tray in the rear console box ■...
Page 388: Overhead Console
3-6. Using the storage features Overhead console Overhead console Push the lid. The overhead console is useful temporarily storing small items. CAUTION Items that should not be left in the overhead console ■ Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.
Page 389: Cup Holders
3-6. Using the storage features Cup holders Cup holders Front Rear Pull down the armrest and open the lid.
Page 390 3-6. Using the storage features Cup holders Adjusting size of the front cup holder ■ Remove the adapter. CAUTION Items unsuitable for the cup holder ■ Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 391: Bottle Holders
3-6. Using the storage features Bottle holders Bottle holders For front seats For rear seats NOTICE Items that should not be stowed in the bottle holders ■ Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid.
Page 392: Auxiliary Boxes
3-6. Using the storage features Auxiliary boxes Auxiliary boxes Type A (driver’s side instrument panel) Push down the knob. Type B (front console) Lift the lid. Type C (front console) Lift the lid.
Page 393 3-6. Using the storage features Auxiliary boxes Type D (front passenger’s side instrument panel) Coin holder (type A) ■ Nickels, quarters and dimes can be stored separately.
Page 394 3-6. Using the storage features Auxiliary boxes Audio device holder (type B) ■ By removing an adapter, the auxiliary box on the front console can be used as an audio device holder. The adapter can be stored in the rear console box when not in use.
Page 395 3-6. Using the storage features Auxiliary boxes CAUTION While driving (type A, B and C) ■ Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.
Page 396: Other Interior Features
3-7. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.
Page 397: Vanity Mirror
3-7. Other interior features Vanity mirror Slide the cover. The light turns on when the cover is opened (if equipped).
Page 398: Power Outlets
3-7. Other interior features Power outlets The power outlets can be used for a following component. 12 V: Accessories that run on less than 10 A. 120 V AC : Accessories that use less than 100 W. Console box (12 V) Front passenger’s side instrument panel (12 V) Luggage compartment (12 V)
Page 399 3-7. Other interior features Luggage compartment (120 V AC) :Vehicles with rear seat entertainment system The power outlets can be used when ■ Vehicles with smart key system 12 V: The “ENGINE START STOP” switch is in ACCESSORY or IGNI- TION ON mode.
Page 400 3-7. Other interior features NOTICE To avoid damaging the power outlets ■ Close the power outlet lid when not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. To prevent the fuse from being blown ■...
Page 401: Seat Heaters
3-7. Other interior features ∗ Seat heaters For driver’s seat For front passenger’s seat The indicator light comes on. Adjusts the seat tempera- ture The further you turn the dial upward, the warmer the seat becomes. The seat heaters can be used when ■...
Page 402 3-7. Other interior features CAUTION Burns ■ Use caution when seating the following persons in a seat with the seat ● heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 403: Armrest
3-7. Other interior features Armrest Front Lift the lever up and slide the armrest. Rear Pull the armrest down for use. NOTICE To prevent damage to the armrest ■ Do not place too much strain on the armrest.
Page 404: Floor Mats
3-7. Other interior features Floor mats Securely place a mat that matches the size of the space on the car- pet. Secure the floor mat using the hooks provided. CAUTION When inserting the floor mat ■ Observe the following precautions. Failure to do so may result in the floor mat slipping and interfering with the movement of the pedals during driving, resulting in an accident.
Page 405: Luggage Compartment Features
3-7. Other interior features Luggage compartment features Cargo hooks ■ Cargo hooks are provided for securing loose items. Shopping bag hooks ■ Auxiliary box ■ Lift the right side deck board.
Page 406 3-7. Other interior features Luggage cover (if equipped) ■ Pull out the luggage cover and hook it on the anchors. Removing luggage cover (vehicles with luggage cover) Retract the cover and release both ends, then lift it out. After removing the luggage cover, place it somewhere other than the passenger compartment.
Page 407: Garage Door Opener
3-7. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 408 3-7. Other interior features ® Programming HomeLink ■ Point the remote control trans- STEP mitter for the device 1 to 3 in. (25 ® to 75 mm) from the HomeLink buttons. ® Keep the HomeLink indicator light in view while programming. Press and hold one of the STEP ®...
Page 409 3-7. Other interior features ® Test the HomeLink operation STEP by pressing the newly pro- grammed button. ® If a HomeLink button has been programmed for a garage door, check to see if the garage door opens and closes. If the garage door does not operate, see if your remote control transmitter is of the rolling code type.
Page 410 3-7. Other interior features Programming a rolling code system ■ If your device is rolling code equipped, follow the steps under the ® heading “Programming HomeLink ” before proceeding with the steps listed below. Locate the learn button on the ceiling mounted garage door STEP opener motor.
Page 411 ® the remaining HomeLink buttons. Programming other devices ■ To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. Reprogramming a button ■ ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 412 3-7. Other interior features ® Operating HomeLink ® ® Press the appropriate HomeLink button. The HomeLink indicator light should come on. ® The HomeLink compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed. ®...
Page 413 3-7. Other interior features Before programming ■ Install a new battery in the remote control transmitter. ● The battery side of the remote control transmitter must be pointed away ● ® from the HomeLink button. Certification for the garage door opener ■...
Page 414: Compass
3-7. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. Operation ■ To turn the compass on or off, push and hold “AUTO” for longer than 3 seconds. Displays and directions ■...
Page 415 3-7. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 416 3-7. Other interior features Deviation calibration ■ Stop the vehicle where it is safe to drive in a circle. STEP Push and hold “AUTO” until a STEP number (1 to 15) appears on the compass display. Press “AUTO”, and referring to the map above, select the STEP number of the zone where you are.
Page 417 3-7. Other interior features Conditions unfavorable to correct operation ■ The compass may not show the correct direction in the following conditions: The vehicle is stopped immediately after turning. ● The vehicle is on an inclined surface. ● The vehicle is in a place where the earth’s magnetic field is subject to ●...
Page 418 3-7. Other interior features NOTICE To avoid the compass malfunctions ■ Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. To ensure normal operation of the compass ■...
Page 419: Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 420 4-1. Maintenance and care High pressure car washes ■ Do not allow the nozzles of the car wash to come within close proximity ● of the windows. Before car wash, check that the fuel filler door is closed. ● Aluminum wheels ■...
Page 421 Do not use organic cleaners such as benzene or gasoline. If the windshield washer nozzle become blocked ■ Contact your Toyota dealer. Do not try to clear it with a pin or other object. This may damage the nozzle. Cleaning the exterior lights ■...
Page 422: Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ■ Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 423 4-1. Maintenance and care Caring for leather areas ■ Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Shampooing the carpets ■ There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 424 4-1. Maintenance and care NOTICE Cleaning detergents ■ Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces. Non-seat portions: Organic substances such as benzene or gasoline, ●...
Page 425: Maintenance
It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 426 4-2. Maintenance Allow inspection and repairs to be performed by a Toyota dealer ■ Toyota technicians are well-trained specialists and are kept up to date ● with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 427: Maintenance
“Scheduled Maintenance Guide”, “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 428 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven pedal Accelerator pedal effort or catching)? Automatic transmission • Can the vehicle be held securely on an “Park” mechanism incline with the shift lever in “P”? • Moves smoothly? Brake pedal •...
Page 429 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after parking? • Inflation pressure is correct? • Tire surfaces not worn or damaged? Tire •...
Page 430: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test: ■...
Page 431: Do-It-Yourself Maintenance
Brake fluid level (→P. 455) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 432 4-3. Do-it-yourself maintenance Items Parts and tools • “Toyota Genuine Motor Oil” or equivalent Engine oil level (→P. 446) • Rag or paper towel • Funnel (used only for adding engine oil) • Fuse with same amperage rating Fuses (→P. 481) as original ⎯...
Page 433 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. When working on the engine compartment ■ Keep hands, clothing, and tools away from the moving fan and engine ●...
Page 434 4-3. Do-it-yourself maintenance CAUTION When working near the electric cooling fan or radiator grille ■ Vehicles with smart key system Be sure the “ENGINE START STOP” switch is off. With the “ENGINE START STOP” switch in IGNITION ON mode, the electric cooling fan may automatically start to run if the air conditioning is on and/or if the coolant temperature is high.
Page 435: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the hood catch and lift the STEP hood. Hold the hood open by insert- STEP ing the supporting rod into the slot.
Page 436 4-3. Do-it-yourself maintenance CAUTION Pre-driving check ■ Check that the hood is fully closed and locked. If the hood is not locked properly it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot ■...
Page 437: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front Rear (2WD models) Rear (AWD models)
Page 438 4-3. Do-it-yourself maintenance CAUTION When raising your vehicle ■ Make sure to observe the following to reduce the possibility of death or seri- ous injury. Lift up the vehicle using a floor jack ● such as the one shown in the illustra- tion.
Page 439: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment 2GR-FE engine Engine coolant reservoir Battery (→P. 457) (→P. 452) Fuse box (→P. 481) Engine oil filler cap Electric cooling fans (→P. 448) Condenser (→P. 454) Engine oil level dipstick Radiator (→P. 454) (→P. 446) Washer fluid tank Brake fluid reservoir (→P.
Page 440 4-3. Do-it-yourself maintenance 1AR-FE engine Engine coolant reservoir Battery (→P. 457) (→P. 452) Fuse box (→P. 481) Engine oil filler cap Electric cooling fans (→P. 448) Condenser (→P. 454) Engine oil level dipstick Radiator (→P. 454) (→P. 446) Washer fluid tank Brake fluid reservoir (→P.
Page 441 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After turning off the engine, STEP wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 442 4-3. Do-it-yourself maintenance Wipe the dipstick and reinsert it fully. STEP 2GR-FE engine Full 1AR-FE engine...
Page 443 4-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 444 4-3. Do-it-yourself maintenance Recommended viscosity ■ 2GR-FE engine SAE 5W-30 is the best choice for good fuel economy, and good starting in cold weather. If SAE 5W-30 oil is not available, SAE 10W-30 oil may be used. However, it should be replaced with SAE 5W-30 at the next oil Outside temperature change.
Page 445 1000 km) If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles ● (1000 km), contact your Toyota dealer. After changing the engine oil (U.S.A. only) ■ The oil change system should be reset. Perform the following procedures: STEP Switch the display to the trip meter A when the engine is running.
Page 446 Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 447: Engine Coolant
4-3. Do-it-yourself maintenance NOTICE To prevent serious engine damage ■ Check the oil level on regular basis. When replacing the engine oil ■ Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, or the engine could be damaged. ●...
Page 448 ■ Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system. Coolant selection ■...
Page 449 Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION When the engine is hot ■...
Page 450 4-3. Do-it-yourself maintenance Brake fluid Checking fluid level ■ The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. Adding fluid ■ Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items Clean funnel...
Page 451 4-3. Do-it-yourself maintenance Brake fluid can absorb moisture from the air ■ Excess moisture in the fluid can cause a dangerous loss of braking effi- ciency. Use only newly opened brake fluid. CAUTION When filling the reservoir ■ Take care because brake fluid can harm your hands or eyes and damage painted surfaces.
Page 452 Checking battery condition ■ Check the battery condition using the indicator color. Green: Good condition Dark: Charging is necessary. Have the vehicle inspected by your Toyota dealer. Clear or light yellow: Not work- ing properly. Have the battery checked your Toyota...
Page 453 4-3. Do-it-yourself maintenance Before recharging ■ When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: If recharging with the battery installed on the vehicle, be sure to discon- ● nect the ground cable. Make sure the power switch on the charger is off when connecting and ●...
Page 454 4-3. Do-it-yourself maintenance CAUTION Where to safely charge the battery ■ Always charge the battery in an open area. Do not charge the battery in a garage or closed room where there is not sufficient ventilation. How to recharge the battery ■...
Page 455: Washer Fluid
4-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the low windshield washer fluid level warning light comes on, the washer tank may be empty. Add washer fluid. CAUTION When refilling the washer fluid ■ Do not refill the washer fluid when the engine is hot or running, as the washer fluid contains alcohol and may catch fire if spilled on the engine etc.
Page 456: Tires
Tire rotation ■ Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection.
Page 457 4-3. Do-it-yourself maintenance The tire pressure warning system ■ Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 516) The compact spare tire is not equipped with a tire pressure warning valve and transmitter.
Page 458 A tire goes flat repeatedly or cannot be properly repaired due to the ● size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. Replacing tires and wheels ■ If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 459 4-3. Do-it-yourself maintenance Tire types ■ 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 460 4-3. Do-it-yourself maintenance Routine tire inflation pressure checks ■ The tire pressure warning system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks. Tire pressure warning system certification ■...
Page 461 Do not mix tires of different makes, models or tread patterns. Also, do ● not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted, or bias-ply ●...
Page 462 When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. To avoid damaging the tire pressure warning valves and transmit- ■...
Page 463: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure ■ The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 569) Type A Type B...
Page 464 4-3. Do-it-yourself maintenance Inspection and adjustment procedure ■ Tire valve Tire pressure gauge Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not within the recommended STEP...
Page 465 Reduced safety ● Damage to the drive train ● If a tire needs frequent refilling, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 466 4-3. Do-it-yourself maintenance CAUTION Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. Excessive wear ● Uneven wear ● Poor handling ●...
Page 467: Wheels
● Bent wheels that have been straightened Aluminum wheel precautions ■ ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 468 Because tire repair or replacement may affect the tire pressure warn- ● ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 469: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency. Removal method ■ Vehicles with smart key system: STEP Turn the “ENGINE START STOP” switch off. Vehicles without smart key system: Turn the engine switch to the “LOCK”...
Page 470 Hold the air gun 2 in. (5 cm) from the filter and blow for approximately 2 minutes at 72 psi (500 kpa, 5.0 kgf/cm bar). If it is not available, have the filter cleaned by your Toyota dealer.
Page 471 4-3. Do-it-yourself maintenance Replacement method ■ Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. Checking interval ■ Inspect, clean and replace the air conditioning filter according to the mainte- nance schedule.
Page 472: Key Battery
4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. You will need the following items: ■ ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with rag.) ●...
Page 473 4-3. Do-it-yourself maintenance Remove the depleted battery. STEP Insert a new battery with the “+” terminal facing up. Replacing the battery (vehicles without smart key system) ■ Remove the cover. STEP Remove the module. STEP...
Page 474 Use a CR1632 (vehicles with smart key system), or CR2025 (vehicles ■ without smart key system) lithium battery Batteries can be purchased at your Toyota dealer, jewelers, or camera ● stores. Replace only with the same or equivalent type recommended by a ●...
Page 475 4-3. Do-it-yourself maintenance CAUTION Removed battery and other parts ■ Keep away from children. These parts are small and if swallowed by a child they can cause choking. NOTICE For normal operation after replacing the battery ■ Observe the following precautions to prevent accidents. Always work with dry hands.
Page 476: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles with smart key system: STEP Turn the “ENGINE START STOP” switch off. Vehicles without smart key system: Turn the engine switch to the “LOCK”...
Page 477 Check if the fuse has blown. STEP Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. ITY42C012 Type B Normal fuse Blown fuse Contact your Toyota dealer.
Page 478 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings Engine compartment ■ Fuse block Back of the cover...
Page 479 4-3. Do-it-yourself maintenance Fuse Ampere Circuit AC 115V 15 A Power outlet DEICER 20 A Windshield wiper de-icer Multi-port fuel injection system/ INJ NO.1 15 A sequential multi-port fuel injec- tion system INJ NO.2 15 A Igniter system Multi-port fuel injection system/ EFI NO.2 15 A sequential multi-port fuel injec-...
Page 480 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Smart key system, multi-port fuel injection system/sequential EFI NO.1 10 A multi-port fuel injection system, automatic transmission Multi-port fuel injection system/ sequential multi-port fuel injec- ETCS 10 A tion system, electronic throttle control system 15 A Turn signal lights INJ NO.1, INJ NO.2, SRS airbag...
Page 481 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Gauges and meters, clock, audio system, main body ECU, wireless remote control, smart ECU-B 10 A key system, power back door, front passenger occupant clas- sification system 10 A Rear seat entertainment system RADIO NO.1 15 A Audio system, navigation system SPARE...
Page 482 4-3. Do-it-yourself maintenance Driver’s side instrument panel ■ Fuse Ampere Circuit RR DOOR 25 A Power windows RL DOOR 25 A Power windows FR DOOR 25 A Power windows FR FOG 15 A Fog lights 7.5 A On-board diagnosis system FL DOOR 25 A Power windows...
Page 483 4-3. Do-it-yourself maintenance Fuse Ampere Circuit SEAT HTR 20 A Seat heaters S/ROOF 25 A Electric moon roof Side marker lights, tail lights, TAIL 10 A license plate light Emergency flashers, audio sys- tem, clock, instrument panel light control, glove box light, console PANEL box light, steering switches, out- side rear view mirror defoggers,...
Page 484 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Navigation system, back-up lights, charging system, emer- GAUGE NO.1 10 A gency flashers, multi-informa- tion display FR WIPER 30 A Windshield wipers RR WIPER 15 A Rear window wiper Multi-port fuel injection system/ sequential multi-port fuel injec- tion system, steering lock sys- 10 A tem, smart key system, SRS...
Page 485 Never use a fuse of a higher amperage rating than indicated, or use any ● other object in place of a fuse. Always use a genuine Toyota fuse or equivalent. ● Never replace a fuse with a wire, even as a temporary fix.
Page 486: Light Bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 487: Replacing Light Bulbs
4-3. Do-it-yourself maintenance Rear bulb locations ■ Stop/tail and rear side Tail light marker lights Rear turn signal light Back-up light License plate light Replacing light bulbs Headlight low beams (halogen bulb) ■ Turn the bulb base counterclock- STEP wise.
Page 488 4-3. Do-it-yourself maintenance Unplug connector while STEP pushing the lock release. Headlight high beams ■ Unplug connector while STEP pushing the lock release. Turn the bulb base counterclock- STEP wise.
Page 489 4-3. Do-it-yourself maintenance Front fog lights (if equipped) ■ Remove the engine under cover STEP bolt and pull down the engine under cover. Turn the bulb base counterclock- STEP wise. Unplug connector while STEP pushing the lock release.
Page 490 4-3. Do-it-yourself maintenance Front turn signal/parking lights ■ Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 491 4-3. Do-it-yourself maintenance Front side marker lights ■ Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 492 4-3. Do-it-yourself maintenance Rear turn signal lights, stop/tail and rear side marker lights ■ Left side Open the back door and remove STEP the cover. To protect the cover, place a rag between the flathead screwdriver and cover as shown in the illus- trations.
Page 493 4-3. Do-it-yourself maintenance Remove the light bulb. STEP Stop/tail and rear side marker lights Rear turn signal light Tail and back-up lights ■ Open the back door and remove STEP the trim board. Turn the bulb base counterclock- STEP wise. Back-up light Tail light Remove the light bulb.
Page 494 4-3. Do-it-yourself maintenance License plate light ■ Open the back door and remove STEP the trim board. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 495 4-3. Do-it-yourself maintenance Bulbs other than the above ■ If any of the bulbs listed below has burnt out, have your Toyota dealer replace it. ● Headlight low beams (discharge bulb) ● High mounted stoplight Condensation build-up on the inside of the lens ■...
Page 496 Doing so may result in death or serious injury due to electric shock. High-intensity discharge (HID) headlights (if equipped) ■ Contact your Toyota dealer before replacing high-intensity discharge ● headlights (including light bulbs). Do not touch the high-intensity discharge headlight’s high voltage socket ●...
Page 497 4-3. Do-it-yourself maintenance...
Page 498: Essential Information
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE To prevent battery discharge ■...
Page 499: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 500 5-1. Essential information Towing with a sling-type truck NOTICE To prevent body damage ■ Do not tow with a sling type truck, either from the front or rear.
Page 501 5-1. Essential information Towing with a wheel lift-type truck From front (2WD models) Release the parking brake. From front (AWD models) Use a towing dolly under the rear wheels. From rear Use a towing dolly under the front wheels.
Page 502 5-1. Essential information NOTICE To prevent causing serious damage to the transmission ■ Never tow this vehicle from the rear with the front wheels on the ground. ● For AWD models only: Never tow this vehicle from the front with the rear ●...
Page 503: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ■ ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 504: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 505: Event Data Recorder
5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is a system to record data in a crash or a near car crash event.
Page 506 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: ● An agreement from the vehicle’s owner (or the leasing company for a leased vehicle) is obtained ●...
Page 507: Steps To Take In An Emergency If A Warning Light Turns On Or A Warning Buzzer Sounds
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer) •...
Page 508 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Malfunction in: •...
Page 509 5-2. Steps to take in an emergency Warning light Warning light/Details SRS warning light Malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The seat belt pretensioner system. ABS warning light (U.S.A.) Malfunction in: •...
Page 510 When the light comes on: Adjust the tire inflation Low tire inflation pressure. pressure. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer. pressure warning system.
Page 511 (Do not stop the drive has been automati- engine.) (AWD models) cally engaged. When the light comes on: Malfunction in the Active Have the system checked Torque Control 4WD sys- by your Toyota dealer. tem.
Page 512 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Engine oil replacement reminder light Illuminates for about 3 sec- onds and then flasher for Check and the engine oil, about 15 seconds: and change if necessary. Engine oil is scheduled to (U.S.A.) be changed.
Page 513 5-2. Steps to take in an emergency Follow the correction procedures. (smart key system) After taking the specified steps to correct the suspected problem, check that the warning light turns off. Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart key system warning light...
Page 514 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart key system warning light Turn the Indicates that the driver’s door has “ENGINE been opened or START closed with the shift STOP” lever in “P”, the switch off Once...
Page 515 The malfunction indicator lamp will go off after taking several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. Key reminder buzzer (vehicles without smart key system) ■...
Page 516 5-2. Steps to take in an emergency SRS warning light ■ This warning light system monitors the following: The airbag sensor assembly ● Front airbag sensors ● The curtain shield airbag sensors ● The side and curtain shield airbag sensors ●...
Page 517 5-2. Steps to take in an emergency Changing the engine oil (U.S.A. only) ■ Make sure to reset the oil change system. (→P. 450) The tire pressure warning light may come on due to natural causes ■ The tire pressure warning light may come on due to natural causes such as natural air leaks or tire inflation pressure changes caused by temper- ature.
Page 518 If there is a lot of snow or ice on the vehicle, in particular around the ● wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota ● wheels, the tire pressure warning system may not work properly with some types of tires.)
Page 519 If the tire pressure warning light comes on after blinking 1 minute fre- quently when the “ENGINE START STOP” switch is turned to IGNI- TION ON mode, have it checked by your Toyota dealer. Vehicles without smart key system If the tire pressure warning light comes on after blinking 1 minute fre- quently when the engine switch is turned to the “ON”...
Page 520 5-2. Steps to take in an emergency CAUTION If a blowout or sudden air loss should occur ■ The tire pressure warning system may not activate immediately. Maintenance of the tires ■ Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 521 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
Page 522: If A Warning Message Is Displayed
A buzzer may sound when a warning message is shown on the multi-information display. If the warning message is shown again after its correction ■ procedure has been performed Contact your Toyota dealer as soon as possible. ∗ : If equipped...
Page 523: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. Before jacking up the vehicle ■ ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ●...
Page 524 5-2. Steps to take in an emergency Compact spare tire ■ The compact spare tire saves space in your luggage compart- ment, and its lighter weight helps to enhance fuel economy and permits easier installation in case of a flat tire. The compact spare tire is designed for temporary emer- gency use only.
Page 525 5-2. Steps to take in an emergency Taking out the spare tire Loosen the center fastener that secures the spare tire. Replacing a flat tire Chock the tires. STEP Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire...
Page 526 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground.
Page 527 5-2. Steps to take in an emergency Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Installing the spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur-...
Page 528 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. STEP...
Page 529 5-2. Steps to take in an emergency The compact spare tire ■ The compact spare tire is identified by the label “TEMPORARY USE ● ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. Make sure to check the tire inflation pressure of the compact spare ●...
Page 530 5-2. Steps to take in an emergency CAUTION Using the tire jack ■ Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. Do not use the tire jack for any purpose other than replacing tires or ●...
Page 531 5-2. Steps to take in an emergency CAUTION Replacing a flat tire ■ Observe the following precautions to reduce the risk of death or serious injury. Never use oil or grease on the wheel bolts or wheel nuts. ● Oil and grease may cause the wheel nuts to be excessively tightened, leading to bolt or disc wheel damage.
Page 532 5-2. Steps to take in an emergency CAUTION When using the compact spare tire ■ Remember that your compact spare tire is specifically designed for ● use with your vehicle. Do not use your compact spare tire on another vehicle. Do not use two compact spare tires simultaneously.
Page 533 ■ When removing or fitting the wheels, tires or the tire pressure warning ● valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled cor- rectly. Replace the grommets for the tire pressure warning valves and trans- ●...
Page 534: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (→P. 163, 167) or releasing the steering lock (→P. 165, 168), confirm the following points. The engine will not start even if you are carrying the correct ■...
Page 535 ● The battery may be discharged. (→P. 548) ● There may be a malfunction in the steering lock system (vehi- cles with smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Page 536 Press and hold the “ENGINE START STOP” switch for about STEP 15 seconds while depressing the brake pedal firmly. Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by your Toyota dealer.
Page 537: If The Shift Lever Cannot Be Shifted From "P
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 538: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart key system, bring a master key and the key number stamped on the key number plate.
Page 539: If The Electronic Key Does Not Operate Properly (Vehicles With Smart Key System)
5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart key system) If communication between the electronic key and vehicle is inter- rupted (→P. 28) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote con- trol cannot be used.
Page 540 5-2. Steps to take in an emergency Changing “ENGINE START STOP” switch modes and starting the engine Shift the shift lever to “P” and apply the brakes. STEP Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. An alarm will sound to indicate...
Page 541 5-2. Steps to take in an emergency Stopping the engine ■ Shift the shift lever to “P” and press the “ENGINE START STOP” switch as you normally do when stopping the engine. Replacing the key battery ■ As this above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery depletes.
Page 542: If The Battery Is Discharged
You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12 volt battery, you can jump start your Toyota following the steps below.
Page 543 5-2. Steps to take in an emergency 1AR-FE engine Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicles as shown in the illustration.
Page 544 Once the vehicle’s engine has started, remove the jumper STEP cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.
Page 545 5-2. Steps to take in an emergency Starting the engine when the battery is discharged ■ The engine cannot be started by push-starting. Avoiding a discharged battery ■ Turn off the headlights and the audio system while the engine is turned ●...
Page 546 5-2. Steps to take in an emergency CAUTION Battery precautions ■ The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following pre- cautions when handling the battery: When working with the battery, always wear safety glasses and take care ●...
Page 547: If Your Vehicle Overheats
Check to see if the cooling fan is operating. STEP If the fan is operating: Wait until the engine coolant temperature gauge begins to fall and then stop the engine. If the fan is not operating: Stop the engine immediately and call your local Toyota dealer.
Page 548 STEP Water can be used in an emer- gency measure if engine cool- ant is unavailable. (→P. 565) Have the vehicle checked at the nearest Toyota dealer as soon as possible. Overheating ■ In the following situations, your vehicle may be overheating.
Page 549 5-2. Steps to take in an emergency CAUTION To prevent an accident or injury when inspecting under the hood of ■ your vehicle If steam is seen coming from under the hood, do not open the hood until ● the steam has subsided. The engine compartment may be very hot, caus- ing serious injury such as burns.
Page 550: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and shift the shift STEP lever in “P”.
Page 551 5-2. Steps to take in an emergency NOTICE To avoid damaging the transmission and other components ■ Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may ●...
Page 552 5-2. Steps to take in an emergency...
Page 553: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 189.0 in. (4800 mm) Overall width 75.0 in. (1905 mm) Overall height 63.4 in. (1610 mm) Wheelbase 109.3 in. (2775 mm) Front 64.2 in. (1630 mm) Tread 64.4 in.
Page 554 Vehicle identification number ■ The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 555: 6-1. Specifications
6-1. Specifications Engine number ■ 2GR-FE engine The engine number is stamped on the engine block as shown. 1AR-FE engine...
Page 556 6-1. Specifications Engine Model 2GR-FE, 1AR-FE Type 2GR-FE engine 6-cylinder V type, 4-cycle, gasoline 1AR-FE engine 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.70 × 3.27 in. (94.0 × 83.0 mm) 2GR-FE engine 3.54 × 4.13 in. (90.0 × 105.0 mm) 1AR-FE engine Displacement 2GR-FE engine...
Page 557: Lubrication System
With filter: 4.7 qt. (4.4 L, 3.9 lmp.qt.) Without filter: 4.2 qt. (4.0 L, 3.5 lmp.qt.) Oil grade ILSAC multigrade engine oil Recommended oil Use Toyota approved “Toyota Genuine Motor Oil” viscosity or equivalent to satisfy the grade and viscosity shown below. 2GR-FE engine...
Page 558: Cooling System
1AR-FE engine 7.3 qt. (6.9 L, 6.1 lmp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non- Coolant type silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technol-...
Page 559: Ignition System
6-1. Specifications Ignition system Spark plug Make DENSO 2GR-FE engine FK20HR11 1AR-FE engine SK16HR11 0.043 in. (1.1 mm) NOTICE Iridium-tipped spark plugs ■ Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine. Electrical system Battery 12.6 ⎯ 12.8 V Fully charged Open voltage at 12.2 ⎯...
Page 560: Automatic Transaxle
NOTICE Automatic transaxle fluid type ■ Using transaxle fluid other than “Toyota Genuine ATF WS” may cause dete- rioration in shift quality, locking up of your transaxle accompanied by vibra- tion, and ultimately damage the transaxle of your vehicle. Transfer (AWD models) Oil capacity 0.84 qt.
Page 561 6-1. Specifications Brakes Pedal clearance 1.1 in. (28 mm) Min. ⎯ 0.12 in. (1.0 ⎯ 3.0 mm) Pedal free play 0.04 Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) ⎯ 6 clicks Parking brake adjustment Fluid type SAE J1703 or FMVSS No.
Page 562 6-1. Specifications Tires and wheels Type A Tire size P245/50R20 102H Driving under normal conditions Front tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Rear tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Tire inflation pressure Driving at high speeds above 99 mph (Recommended cold tire (160 km/h) (in countries where such inflation pressure)
Page 563 6-1. Specifications Type B Tire size P245/55R19 103S Driving under normal conditions Front tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Rear tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Tire inflation pressure Driving at high speeds above 99 mph (Recommended cold tire (160 km/h) (in countries where such inflation pressure)
Page 564 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights ⎯ Low beam (discharge bulbs ⎯ Low beam (halogen bulbs High beam 9005 3457 Front turn signal/parking lights 30/8 Front side marker lights ⎯ Exterior Front fog lights Stop/tail and rear side marker 7443 21/5 lights...
Page 565: Fuel Information
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. Fuel tank opening for unleaded gasoline ■ To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. If your engine knocks ■...
Page 566 Toyota allows the use of oxygenate blended gasoline where the oxygen- ● ate content is up to 10% ethanol or 15% MTBE. If you use gasohol in your Toyota, be sure that it has an octane rating no ● lower than 87.
Page 567 ■ Some gasoline contains octane enhancing additive called MMT (Methylcy clopentadienyl Manganese Tricarbonyl). Toyota DOES NOT recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service.
Page 568: Tire Information
6-1. Specifications Tire information Typical tire symbols Standard tire Compact spare tire Tire size (→P. 578) DOT and Tire Identification Number (TIN) (→P. 577)
Page 569 6-1. Specifications Location of treadwear indicators (→P. 461) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Summer tire or all season tire (→P. 464) An all season tire has “M+S” on the sidewall. A tire not marked “M+S”...
Page 570 6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identifica- tion mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
Page 571 6-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 or 3 digits) Speed symbol...
Page 572 6-1. Specifications Tire dimensions ■ Section width Tire height Wheel diameter Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber ITY61C013 Carcass Rim lines Bead wires Chafer...
Page 573 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■...
Page 574 6-1. Specifications Traction AA, A, B, C ■ The traction grades, from highest to lowest, are AA, A, B and C, and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
Page 575 6-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation parked for three hours or more, or has not pressure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which a Maximum inflation...
Page 576 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 577 6-1. Specifications Tire related term Meaning The load on an individual tire that is determined Vehicle maximum load by distributing to each axle its share of the on the tire maximum loaded vehicle weight, and dividing by two The load on an individual tire that is determined by distributing to each axle its share of curb Vehicle normal load weight, accessory weight, and normal occu-...
Page 578 6-1. Specifications Tire related term Meaning Cord The strands forming the plies in the tire The parting of cords from adjacent rubber com- Cord separation pounds Any parting within the tread, sidewall, or inner- Cracking liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the...
Page 579 6-1. Specifications Tire related term Meaning (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or Intended outboard deeper than the same molding on the other sidewall sidewall of the tire, or (b)The outward facing sidewall of asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle...
Page 580 6-1. Specifications Tire related term Meaning A tire intended for use on passenger cars, mul- tipurpose passenger vehicles, and trucks, that Passenger car tire have a gross vehicle weight rating (GVWR) of 10,000 lb. or less A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies...
Page 581 6-1. Specifications Tire related term Meaning A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Snow tire Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and which...
Page 582 6-1. Specifications : Table 1 ⎯ Occupant loading and distribution for vehicle normal load for various designated seating capacities Designated seating Occupant distribution in Vehicle normal load, capacity, Number of a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10...
Page 583: Customization
Toyota dealership. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Vehicles with TFT type multi-information display Some function settings can be changed by operating the multi- information display.
Page 584 6-2. Customization Customized Item Function Default setting setting Operation signal (Emergency flashers) Operation signal (Buzzer) Level 1 to 6 Wireless Operation signal Level 7 remote (Buzzer volume) control Open door warning (→P. 43) function (when locking the vehi- cle) Panic function Driver’s door unlocked in one All doors...
Page 585 6-2. Customization Customized Item Function Default setting setting Smart key system Smart key Operation signal system (Emergency flashers) (→P. 28) Operation signal (Buzzer) Light sensor sensitivity Level 3 Level 1 to 5 Daytime running light system (U.S.A. only) Automatic Automatic High Beam light control (if equipped) system...
Page 586 6-2. Customization Customized Item Function Default setting setting 7.5 seconds Time period before 15 seconds lights turn off 30 seconds Vehicles with smart key system: Operation after the “ENGINE START STOP” switch is turned Vehicles without smart key system: Operation after the engine switch Illumination is turned to the “LOCK”...
Page 587 6-2. Customization Customizing the features by using the multi-information display (vehicles with TFT type multi-information display) Press the “SETUP” button while STEP the vehicle is stopped. The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 10 seconds, the display will revert to the previous screen.
Page 588 6-2. Customization Choose a desired setting by STEP pressing the “INFO” or “SETUP” button, and press the “SELECT RESET” button. If any settings are changed, the display will revert to the previous screen. The illustration assumes that “Auto Locking” was chosen in STEP The current setting is indicated by yellow text.
Page 589 6-2. Customization Select “Default Settings” STEP pressing the “INFO” or “SETUP” button, and press the “SELECT RESET” button. If you select “Exit” and press the “SELECT RESET” button, the display will revert to the previous screen. Select “Yes” by pressing the STEP “INFO”...
Page 590: Initialization Items To Initialize
6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference • After reconnecting or changing the Power back door battery P.
Page 591 6-3. Initialization...
Page 592: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 593: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English.
Page 595: Abbreviation List
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2-Wheel Drive 4-Wheel Drive Anti-lock Brake System Accessory Automatic Locking Retractor Auxiliary All-Wheel Drive Air Conditioning Child Restraint System ECON Economy Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR Gross Axle Weight Rating GVWR Gross Vehicle Weight Rating...
Page 596 Abbreviation list ABBREVIATIONS MEANING On Board Diagnostics PASS Passenger Power Power Steering Supplemental Restraint System TEMP Temperature Thin Film Transistor Tire Identification Number TPMS Tire Pressure Warning System TRAC Traction Control Vehicle Identification Number Vehicle Stability Control...
Page 597: Alphabetical Index
Alphabetical index Alphabetical index Audio system Air conditioning filter....474 A/V input adapter ....337 Automatic air conditioning Antenna......... 291 system ........266 Audio input ......312 Manual air conditioning AUX adapter ......312 system ........275 CD player/changer ....294 ABS ...........226 MP3/WMA disc .....
Page 598: Index
Alphabetical index Preparing and checking Child-protectors.......55 before winter ...... 245 Child restraint system....130 ® Bluetooth ....... 348 How your child should wear Bottle holder ......395 the seat belt ......80 Brake Installing child restraints..136 Fluid........455 Moon roof precautions ....95 Parking brake .......
Page 599: Index
Alphabetical index Door courtesy lights If your vehicle becomes Door courtesy lights ....384 stuck ........556 Wattage.........571 If your vehicle needs to be Door lock towed ........505 Back door ........59 If your vehicle overheats ..553 Side door.........53 Emergency flashers....504 Wireless remote control key..43 Engine Doors...
Page 600 Alphabetical index Fog lights Head restraints Replacing light bulbs .... 491 Adjusting .........75 Switch........214 Headlights Wattage ........ 571 Replacing light bulbs .....491 Four-wheel drive system ..226 Switch........202 Front fog lights Wattage.........571 Replacing light bulbs .... 491 Heaters Switch........214 Seat heaters......405 Wattage ........
Page 601 Alphabetical index Keyless entry......28 Maintenance Keys Do-it-yourself maintenance ... 436 Electronic key......26 General maintenance.... 432 If you lose your keys .....544 Maintenance data ....560 If your electronic key Maintenance requirements ... 430 battery is discharged...477, 545 Manual air conditioning Ignition switch....163, 167 system ........
Page 602 Alphabetical index Personal lights Cleaning and maintaining Switch........386 the seat belts ......428 Wattage ........ 571 Emergency Locking Power back door ....... 59 Retractor .......79 Power outlet......402 How to wear your seat belt..77 Power windows ......90 How your child should wear the seat belt ......80 Pregnant women, Radiator........
Page 603 Alphabetical index Smart key system Tachometer ......178 Entry function ......28 Tail lights Starting the engine ..163, 167 Replacing light bulbs..... 491 Spare tire Switch ........202 Inflation pressure....468 Wattage......... 571 Storage location ....529 Talk switch ......351 Spark plug ........566 Telephone switch ....
Page 604 Alphabetical index Trip information SRS airbags ......515 display ......184, 198 Tire pressure ......516 Trip meter......... 178 Washer fluid ......516 Turn signal lights Warning messages ....528 Replacing light bulbs .... 491 Washer Switch........175 Checking .......460 Wattage ........ 571 Preparing and checking before winter .......245 Switch........215 Utility vehicle precautions..
Page 605 What to do if... What to do if... A tire punctures If you have a flat tire P. 529 Engine immobilizer system P. 101 The engine does not start If the engine will not start P. 540 If the battery is discharged P.
Page 606: What To Do If
What to do if... The warning light or indicator If the warning light turns on or a P. 513 light comes on warning buzzer sounds... Instrument cluster Center display...
Page 607 What to do if... ■ Warning lights Master warning light Open door warning light P. 516 P. 516 Low engine oil pressure Tire pressure warning warning light light P. 514 P. 516 Charging system Engine oil replacement warning light reminder light P.
Page 608 What to do if...
Page 609 What to do if...
Page 610 What to do if...
Page 611: Gas Station Information
6.4 (6.1, 5.4) 4.7 (4.4, 3.9) (reference) Without filter 6.0 (5.7, 5.0) 4.2 (4.0, 3.5) “Toyota Genuine Motor Oil” or equivalent Oil grade: ILSAC multigrade engine oil Engine oil type Recommended oil viscosity P. 564 2GR-FE engine: SAE 5W-30 1AR-FE engine: SAE 5W-20 or 0W-20...

Toyota Venza 2009 Owner's Manual

Quick Links

Related Manuals for Toyota Venza 2009

Summary of Contents for Toyota Venza 2009