Toyota PRUS V 2020 Owner's Manual

Table of Contents

Quick Links

Download this manual

Table of Contents

Summary of Contents for Toyota PRUS V 2020

Page 3 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
Page 4: Table Of Contents
TABLE OF CONTENTS For your information .......8 Instrument cluster Reading this manual.....14 How to search ......15 Pictorial index .......16 Instrument cluster Warning lights and For safety and security indicators......86 Gauges and meters..... 90 Multi-information display ..94 1-1. For safe use Head-up display ....
Page 5 ........202 4-1. Before driving 4-5. Using the driving support Driving the vehicle .....160 systems Cargo and luggage ....170 Toyota Safety Sense..205 Trailer towing .....172 PCS (Pre-Crash Safety 4-2. Driving procedures system) ......211 Power (ignition) switch..173 LDA (Lane Departure Alert EV drive mode ....178...
Page 6 TABLE OF CONTENTS 5-4. Using the other interior Interior features features Other interior features ..277 • Sun visors ..... 277 5-1. Using the air conditioning • Vanity mirrors....277 system and defogger • Clock ......278 Automatic air conditioning •...
Page 7 6-3. Do-it-yourself maintenance 7-2. Steps to take in an emergency Do-it-yourself service precautions ......295 If your vehicle needs to be towed ..... 349 Hood ........297 If you think something Positioning a floor jack..299 is wrong......355 Engine compartment..301 If a warning light turns 12-volt battery ....311 on or a warning buzzer Tires........315...
Page 8 TABLE OF CONTENTS Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)...426 Fuel information ....436 8-2. Customization Customizable features ..437 Index What to do if... (Troubleshooting) .....444 Alphabetical index ......448 Refer to the “Navigation System Owner’s Manual” for information regarding the equipment listed below.
Page 10: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. Using these spare parts and acces-...
Page 11 ● Seat belt pretensioner system ● Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of an RF-transmitter system. Further information regarding frequency bands, power levels, antenna posi- tions and installation provisions for the installation of RF-transmitters, is avail- able on request at your Toyota dealer.
Page 12 • Operation status of the driving assist systems • Images from the cameras Your vehicle is equipped with cameras. Contact your Toyota dealer for the location of recording cameras. The recorded data varies according to the vehicle grade level and options with which it is equipped.
Page 13 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 14 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 16: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
Page 17: How To Search
How to search Searching by name ■ • Alphabetical index ..P. 448 Searching installation ■ position • Pictorial index....P. 16 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 444 Searching by title ■...
Page 18: Pictorial Index
Pictorial index Pictorial index ■ Exterior The shape of the headlights may differ depending on the grade, etc. (P. 332) Side doors ........P. 118 Locking/unlocking .
Page 19 Pictorial index Windshield wipers ....... . . P. 199 Precautions against winter season ..... P. 254 Fuel filler door .
Page 20 Pictorial index ■ Instrument panel Power switch ........P. 173 Starting the hybrid system/changing the modes .
Page 21 Pictorial index Multi-information display ......P. 94 Display..........P. 94 Energy monitor .
Page 22 Pictorial index ■ Switches 1, 2 IPA (Intelligent Parking Assist) switch Manual headlight leveling dial ..... P. 189 Head-up display switches......P. 103 Outside rear view mirror switches.
Page 23 Pictorial index Instrument cluster light control button ....P. 92 Clock adjustment buttons ......P. 278 : Refer to the “Navigation System Owner’s Manual”.
Page 24 Pictorial index Audio remote control switches Meter control switches ......P. 94 Cruise control switch Dynamic radar cruise control.
Page 25 Pictorial index Seat heater switches ......P. 265 EV drive mode switch ......P. 178 Driving mode select switches .
Page 26 Pictorial index ■ Interior SRS airbags ........P. 40 Floor mats .
Page 27 Pictorial index Inside rear view mirror ......P. 151 Sun visors ........P. 277 Vanity mirrors .
Page 28 Pictorial index...
Page 29: For Safety And Security
For safety and security 1-1. For safe use Before driving.......28 For safe driving ....30 Seat belts......32 SRS airbags......40 Safety information for children......50 Child restraint systems ..51 Installing child restraints ..60 Exhaust gas precautions ..73 1-2. Hybrid system Hybrid system features ..74 Hybrid system precautions ......78 1-3.
Page 30: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 31 ■ Do not use floor mats designed for other models or different model year ● vehicles, even if they are Toyota Genuine floor mats. Only use floor mats designed for the driver’s seat. ● Always install the floor mat securely using the retaining hooks (clips) pro- ●...
Page 32: For Safe Driving
1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 33 1-1. For safe use WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving. ● Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback.
Page 34: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 35 1-1. For safe use Fastening the seat belt (second center seat) Press the plate to release, and pull out the seat belt. Connect by inserting plate B Plate B into buckle B until a click sound is heard. Buckle B Secure the belt by inserting plate A into buckle A until a Plate A...
Page 36 1-1. For safe use Releasing the seat belt (second center seat) Press the release button on Plate A buckle A with a hand on the Release button plate A and release the belt. Buckle A Use plate A etc. to push the button on buckle B, and uncou- Plate B ple plate B.
Page 37 1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder Release button anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 38 If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent collisions. Seat belt regulations ■ If seat belt regulations exist in the country where you reside, please contact your Toyota dealer for seat belt replacement or installation.
Page 39 Each seat belt should be used by one person only. Do not use a seat belt ● for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always ● use a seat belt and/or an appropriate child restraint system.
Page 40 ■ If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. Adjustable shoulder anchor ■ Always make sure the shoulder belt is positioned across the center of your shoulder.
Page 41 Ensure that the belt and plate are locked and the belt is not twisted. ● If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been ●...
Page 42: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 43 1-1. For safe use SRS airbag system components Front impact sensors Side airbags Front passenger airbag Curtain shield airbags SRS warning light Side impact sensors (rear) Side impact sensors (front) Driver airbag Seat belt pretensioners and Driver’s knee airbag force limiters Airbag sensor assembly The main SRS airbag system components are shown above.
Page 44 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 45 1-1. For safe use WARNING SRS airbag precautions ■ Do not sit on the edge of the seat or ● lean against the dashboard. Do not allow a child to stand in front of ● the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 46 Wash off any residue as soon as possible to prevent skin irritation. If the areas where the SRS airbags are stored, such as the steering wheel ● pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.
Page 47 ■ Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury. Installation, removal, disassembly and repair of the SRS airbags ●...
Page 48 1-1. For safe use If the SRS airbags deploy (inflate) ■ Slight abrasions, burns, bruising etc., may be sustained from SRS airbags, ● due to the extremely high speed deployment (inflation) by hot gases. A loud noise and white powder will be emitted. ●...
Page 49 1-1. For safe use Conditions under which the SRS airbags may deploy (inflate), other than ■ a collision The SRS front airbags and SRS side and curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 50 1-1. For safe use Types of collisions that may not deploy the SRS airbags ■ (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 51 When to contact your Toyota dealer ■ In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or ●...
Page 52: Safety Information For Children
1-1. For safe use Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.
Page 53: Child Restraint Systems
General installation instructions are provided in this manual. (P. 60) ● If child restraint system regulations exist in the country where you reside, please contact your Toyota dealer for the child restraint sys- tem installation. ● Toyota recommends that you use a child restraint system which...
Page 54 1-1. For safe use Types of child restraints Child restraint systems are classified into the following 5 groups according to the regulation ECE No.44: Group 0: Up to 10 kg (22 lb.) (0 - 9 months) Group 0+: Up to 13 kg (28 lb.) (0 - 2 years) Group I: 9 to 18 kg (20 to 39 lb.) (9 months - 4 years) Group II: 15 to 25 kg (34 to 55 lb.) (4 years - 7 years)
Page 55 1-1. For safe use Child restraint system suitability for various seating positions Information provided in the table shows your child restraint system suitability for various seating positions. Seating position Second seat Front passenger Third seat seat Outside Center Mass groups Up to 10 kg (22 lb.) Never put...
Page 56 FIXATION, BASE PLATFORM” (0 to 13 kg [0 to 28 lb.]) approved for the use in this mass group. L2: Suitable for “TOYOTA KID FIX” (15 to 36 kg [34 to 79 lb.]) approved for the use in this mass group.
Page 57 1-1. For safe use Child restraint system suitability for various seating positions (with ISOFIX rigid anchor) Information provided in the table shows your child restraint system suitability for various seating positions. Vehicle ISOFIX Positions Mass groups Size class Fixture Second outside seat ISO/L1 Carrycot ISO/L2...
Page 58 IUF: Suitable for ISOFIX forward-facing child restraints systems of universal category approved for the use in this mass group. Toyota recommend to use “TOYOTA MIDI” approved for the use in this mass group. When using this child restraint system, adjust the support leg to 6th lock position from 1st lock position where the support leg is shortest position.
Page 59 1-1. For safe use When installing the child restraint system on the front passenger seat ■ When you have to use a child restraint system on the front passenger seat, adjust the following: The seatback from the 1st lock position ●...
Page 60 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Toyota strongly urges the use of a proper child restraint system that con- ●...
Page 61 1-1. For safe use WARNING When children are in the vehicle ■ Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death.
Page 62: Installing Child Restraints
1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using a seat belt or ISOFIX rigid anchors. Attach the upper anchorage strap when installing a child restraint. Seat belts (An ELR belt requires a locking clip) ISOFIX rigid anchors (ISOFIX child restraint system)
Page 63 1-1. For safe use Installing child restraints using a seat belt Rear facing  Baby seat (infant seat)/child seat (convertible ■ seat) Adjusting the angle of the seatback. Second seats  While pulling the lever (either [outboard seats only] or ), fold the seatback for- ward and then back to the 1st lock position (most upright...
Page 64 1-1. For safe use Remove the head restraint. (P. 147) Place the child restraint sys- tem on the seat facing the rear of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle.
Page 65 1-1. For safe use Forward-facing Child seat (convertible seat) ■ Adjusting the angle of the seatback. Second seats  While pulling the lever (either [outboard seats only] or ), fold the seatback for- ward and then back to the 1st lock position (most upright position) until it locks into place.
Page 66 1-1. For safe use Remove the head restraint. (P. 147) Place the child restraint sys- tem on the seat facing the front of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle.
Page 67 1-1. For safe use Junior seat (booster seat) ■ Adjusting the angle of the seatback. Second seats  While pulling the lever (either [outboard seats only] or ), fold the seatback for- ward and then back to the 1st lock position (most upright position) until it locks into place.
Page 68 1-1. For safe use Place the child restraint sys- tem on the seat facing the front of the vehicle. Sit the child in the child restraint system. Fit the seat belt to the child restraint sys- tem according to the manu- facturer’s instructions insert the plate into the...
Page 69 1-1. For safe use Removing a child restraint installed with a seat belt Press the buckle release button and fully retract the seat belt. Installation with ISOFIX rigid anchor (ISOFIX child restraint sys- tem) (second outboard seats only) Adjusting the angle of the seatback. While pulling the lever (either ), fold the seatback for- ward and then back to the 1st...
Page 70 1-1. For safe use Open the covers. Install the child restraint system to the seat. If the child restraint has an upper anchorage strap, upper anchorage strap should be latched onto the anchor fitting.
Page 71 You need a locking clip to install the child restraint system. Follow the instruc- tions provided by the manufacturer of the system. If your child restraint sys- tem does not provide a locking clip, you can purchase the following item from your Toyota dealer: Locking clip for child restraint system (Part No. 73119-22010)
Page 72 1-1. For safe use WARNING When installing a child restraint system ■ Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving or an accident.
Page 73 1-1. For safe use WARNING When installing a child restraint system ■ Extreme Hazard! Do not use a rearward ● facing child restraint on a seat protected by an airbag in front of it! This is because the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child.
Page 74 ■ If child restraint system regulations exist in the country where you reside, ● please contact your Toyota dealer for the child restraint system installation. If other second seats interfere with the child restraint system when install- ● ing a child restraint system in the second seat, adjust the seat cushions to the same position and align the seatbacks at the same angle.
Page 75: Exhaust Gas Precautions
Keep the back door closed. ● If you smell exhaust gases in the vehicle even when the back door is ● closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. When parking ■...
Page 76: 1-2. Hybrid System
1-2. Hybrid system Hybrid system features Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the characteristics of your vehicle, and operate it with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving condi- tions, improving fuel efficiency and reducing exhaust emis- sions.
Page 77 1-2. Hybrid system ◆ When stopped/during start off The gasoline engine stops* when the vehicle is stopped. During start off, the electric motor (traction motor) drives the vehicle. At slow speeds or when traveling down a gentle slope, the engine is stopped* and the electric motor (traction motor) is used.
Page 78 30 minutes or 16 km (10 miles). If the hybrid battery (traction battery) becomes fully discharged and you are unable to start the hybrid system, contact your Toyota dealer. Charging the 12-volt battery ■...
Page 79 Cooling fan sounds may be heard from the air intake vent under the right- ● hand front seat. Maintenance, repair, recycling, and disposal ■ Contact your Toyota dealer regarding maintenance, repair, recycling and dis- posal. Do not dispose of the vehicle yourself.
Page 80: Hybrid System Precautions
1-2. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it is a high volt- age system (about 650V at maximum) as well as contains parts that become extremely hot when the hybrid system is operating. Obey the warning labels attached to the vehicle.
Page 81 If the emergency shut off system activates, your vehicle will not restart. To restart the hybrid system, contact your Toyota dealer. Hybrid warning message A message is automatically displayed when a malfunction occurs in the hybrid system or an improper operation is attempted.
Page 82 ■ 12-volt battery is disconnected The hybrid system may not start. In this case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer. Running out of fuel ■ When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the vehicle with at least enough gasoline to make the low fuel level warning light (P.
Page 83 1-2. Hybrid system WARNING Road accident cautions ■ Observe the following precautions to reduce the risk of death or serious injury: Pull your vehicle off the road, apply the parking brake, shift the shift posi- ● tion to P, and turn the hybrid system off. Do not touch the high voltage parts, cables and connectors.
Page 84 Toyota dealer or a qualified service shop. If the hybrid battery is not dis- posed of properly, it may cause electric shock that can result in death or serious injury.
Page 85: Theft Deterrent System
1-3. Theft deterrent system Immobilizer system The vehicle’s keys have built-in transponder chips that prevent the hybrid system from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 86 1-3. Theft deterrent system...
Page 87: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......86 Gauges and meters .....90 Multi-information display ..94 Head-up display....103 Energy monitor/ consumption screen ..108...
Page 88: Instrument Cluster Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 89 There may be a malfunction in a system if a light does not come on or turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes or illuminates to indicate a malfunction.
Page 90 2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Cruise control indicator (P. 186) (P. 232) Dynamic radar cruise Tail light indicator control indicator (P. 188) (P. 232) Headlight high beam Cruise control “SET”...
Page 91 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 92: Gauges And Meters
2. Instrument cluster Gauges and meters Hybrid System Indicator Displays hybrid system output or regeneration level (P. 99) Speedometer Displays the vehicle speed Shift position indicators Displays the selected shift position. (P. 180) Fuel gauge Displays the quantity of fuel remaining in the tank Hybrid battery (traction battery) status The amount of charge remaining in the hybrid battery (traction battery) is shown by 8 bars.
Page 93 2. Instrument cluster Odometer and trip meter display Odometer: Displays the total distance that the vehicle has been driven Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently.
Page 94 2. Instrument cluster Instrument cluster light control The brightness of the instrument cluster lights can be adjusted by 4 steps each time the button is pressed. When the tail light is on, the brightness of the instrument clus- ter lights can be adjusted. (The lights can be adjusted when the tail light is on and the surrounding area is dark.)
Page 95 2. Instrument cluster The meters and display illuminate when ■ The power switch is in ON mode. Remaining hybrid battery (traction battery) charge display ■ The charge amount of the hybrid battery (traction battery) is automatically controlled by the hybrid system. For this reason, even if electricity is recov- ered via the regenerative braking, or electricity is generated via the gasoline engine, the displayed hybrid battery (traction battery) charge amount may not reach the highest level (level 8).
Page 96: Multi-Information Display
2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of vehi- cle data. Multi-information display Meter control switches Select an item/change pages Enter/Set Return to the previous screen ● Menu icons Displays the following information when an icon is selected. Some of the information may be displayed automatically depending on the situation.
Page 97 2. Instrument cluster Clock Show the current time on the display. Driving assist system information The information related to driving assist systems such as the LDA (Lane Departure Alert with steering control) and dynamic radar cruise control is displayed. (P. 222, 232) Warning message display Select to display warning messages and measures to be taken if a malfunction is detected.
Page 98 2. Instrument cluster Drive information Items displayed can be switched by pressing of the meter control switches to select and pressing Energy monitor ■ The current vehicle hybrid system condition is displayed. (P. 97) Hybrid System Indicator ■ The hybrid system power output and regenerative charging condi- tions are displayed.
Page 99 2. Instrument cluster How to read the energy monitor Energy monitor When the vehicle is powered by electric motor (traction motor) When the vehicle is powered by both the gasoline engine and electric motor (traction motor) When the vehicle is powered by the gasoline engine...
Page 100 2. Instrument cluster Energy monitor When the vehicle is charging the hybrid battery (traction bat- tery) When there is no energy flow Full Hybrid battery (traction battery) status These images are examples only, and may vary slightly from actual conditions.
Page 101 2. Instrument cluster How to read the Hybrid System Indicator Hybrid System Indicator displays the hybrid system power output and regenerative charging and provides Eco-friendly driving assistance in accordance with the driving conditions and the acceleration. Names and meaning of each icons ■...
Page 102 2. Instrument cluster How to read the fuel consumption and instantaneous fuel con- sumption per minute Fuel consumption in the past 10 minutes Current fuel consumption Regenerated energy in the past 10 minutes One symbol indicates 30 Wh. Up to 10 symbols are shown. How to read the distance to empty/Average vehicle speed after hybrid system started/Average fuel consumption after hybrid system started...
Page 103 2. Instrument cluster System check display ■ After turning the power switch to ON mode, opening image is displayed while system operation is checked. When the system check is complete, the nor- mal screen will return. Pop-up display ■ When a system that supports pop-up displays, such as the air conditioning system, is operated, a pop-up display will be temporarily displayed.
Page 104 2. Instrument cluster Meter display setting initialization ■ Press on the meter control switch to select , and then press Press to select meter setting initialization, press , and then select “YES”. Customization ■ The meter settings can be changed. (Customizable features: P. 437) WARNING Caution for use while driving ■...
Page 105: Head-Up Display
2. Instrument cluster Head-up display The head-up display can be used to project vehicle speed and other information onto the windshield. Summary of functions Head-up display Display brightness will change automatically according to brightness of the surrounding area. “HUD” (Head-up display) switch “SET”...
Page 106 2. Instrument cluster Switching the head-up display On/off When on, the indicator light on the “HUD” switch comes on. Turn-by-turn navigation display When the vehicle approaches an intersection, the direction the vehi- cle should go is guided by the arrow, and the route guidance will start and the distance to the intersection will also be displayed.
Page 107 2. Instrument cluster Setting up the display Setting the brightness ■ The brightness of the display is automatically adjusted in accor- dance with the brightness of the surrounding environment. How- ever, the brightness can also be manually adjusted in 5 stages. Brighter Darker The brightness can be manually...
Page 108 2. Instrument cluster Customizing the display The turn-by-turn navigation display can be shown or hidden. Press and hold the “SET” switch. Customization can be performed when the head-up display is on and the vehicle is traveling at less than 8 km/h (5 mph). Press display position...
Page 109 2. Instrument cluster System check display ■ After switching the power switch to ON mode, system operation is checked. When the system check is complete, the normal screen will return. When driving on snowy roads or in other bright environments ■...
Page 110: Energy Monitor/Consumption Screen
2. Instrument cluster Energy monitor/consumption screen You can view the status of your hybrid system on the navigation system. Energy monitor Press the “APPS” button. Select “Eco” on the “Apps” screen. If the “Trip information” or “Past record” screen is displayed, select “Energy”.
Page 111 2. Instrument cluster Navigation system screen When the vehicle is powered by electric motor (traction motor) When the vehicle is powered by both the gasoline engine and electric motor (traction motor) When the vehicle is powered by the gasoline engine...
Page 112 2. Instrument cluster Navigation system screen When the vehicle is charging the hybrid battery (traction bat- tery) When there is no energy flow Full Hybrid battery (traction battery) status These images are examples only, and may vary slightly from actual conditions.
Page 113 2. Instrument cluster Trip information Press the “APPS” button. (P. 108) Select “Eco”. If the “Energy monitor” or “Past record” screen is displayed, select “Trip information”. Resetting the consumption data Fuel consumption in the past 15 minutes Regenerated energy in the past 15 minutes One symbol indicates 30 Wh.
Page 114 2. Instrument cluster Past record Press the “APPS” button. Select “Eco”. If the “Energy monitor” or “Trip information” screen dis- played, select “Past record”. Best recorded fuel consump- tion Resetting the past record data Average fuel consumption Previous fuel consumption record Updating the average fuel consumption data The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
Page 115: Operation Of Each Component
Operation of each component 3-1. Key information Keys........114 3-2. Opening, closing and locking the doors Side doors......118 Back door......123 Smart entry & start system ......128 3-3. Adjusting the seats Front seats......134 Second seats .....138 Third seats ......143 Head restraints ....146 3-4.
Page 116: 3-1. Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle. Electronic keys • Operating the smart entry & start system (P. 128) • Operating the wireless remote control function Mechanical keys Key number plate Wireless remote control Locks all the doors (P.
Page 117 If you lose your mechanical keys ■ New genuine mechanical keys can be made by your Toyota dealer using another mechanical key and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.
Page 118 P. 326 Confirmation of the registered key number ■ The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer. If a wrong key is used ■ The key cylinder rotates freely to isolate inside mechanism.
Page 119 Toyota dealer. When an electronic key is lost ■ If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
Page 120: Side Doors
3-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry func- tion, wireless remote control or door lock switch. Unlocking and locking the doors from the outside ◆ Smart entry & start system Carry the electronic key to enable this function.
Page 121 3-2. Opening, closing and locking the doors Operation signals ■ A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Security feature ■ If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
Page 122 3-2. Opening, closing and locking the doors Locking and unlocking the doors from the inside ◆ Door lock switch Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door The driver’s door can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 123 3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. Close the door while pulling the door handle. The door cannot be locked if the power switch is in ACCESSORY or ON mode, or the electronic key is left inside the vehicle.
Page 124 3-2. Opening, closing and locking the doors WARNING To prevent an accident ■ Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant throwing out of the vehicle, resulting in death or serious injury. Ensure that all doors are properly closed and locked.
Page 125: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be unlocked/locked and opened by the fol- lowing procedures. ◆ Smart entry & start system Carry the electronic key to enable this function. Locks all the doors Check that the door is securely locked.
Page 126 3-2. Opening, closing and locking the doors When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. Be careful not to pull the back door sideways when closing the back door with the handle.
Page 127 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Before driving ■ Make sure that the back door is fully closed. If the back door is not fully ●...
Page 128 If a bicycle carrier or similar heavy object is attached to the back door, it ● may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.
Page 129 Do not touch the damper stay rod with ● gloves or other fabric items. Do not attach any accessories other ● than genuine Toyota parts to the back Damper stays door. Do not place your hand on the damper stay or apply lateral forces to it. ●...
Page 130: Smart Entry & Start System
3-2. Opening, closing and locking the doors Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ●...
Page 131 3-2. Opening, closing and locking the doors Effective range (areas within which the electronic key is detected) ■ When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of either of the outside front door handle and back door opener switch.
Page 132 3-2. Opening, closing and locking the doors Battery-saving function ■ The battery-saving function will be activated in order to prevent the electronic key battery and the 12-volt battery from being discharged while the vehicle is not in operation for a long time. In the following situations, the smart entry &...
Page 133 3-2. Opening, closing and locking the doors When other wireless key (that emit radio waves) is being used nearby ● When carrying the electronic key together with the following devices that ● emit radio waves • Another vehicle’s electronic key or a wireless key that emits radio waves •...
Page 134 3-2. Opening, closing and locking the doors If the door handle becomes wet while the electronic key is within the effec- ● tive range, the door may lock and unlock repeatedly. In that case, follow the following correction procedures to wash the vehicle: •...
Page 135 (P. 128) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 136: 3-3. Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Manual seat  Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (for driver’s side) Lumbar support adjustment switch (for driver’s side) Power seat (for driver’s side)  Seat position adjustment switch Seat cushion (front)
Page 137 3-3. Adjusting the seats Flattening the seatbacks Before flattening the seatbacks ■ Stop the vehicle in a safe place. Apply the parking brake firmly and shift the shift position to P. (P. 181) Slide the second seats as far back as possible. ( ...
Page 138 3-3. Adjusting the seats WARNING When adjusting the seat position ■ Take care when adjusting the seat position to ensure that other passen- ● gers are not injured by the moving seat. Do not put your hands under the seat or near the moving parts to avoid ●...
Page 139 3-3. Adjusting the seats NOTICE Flattening the seats ■ When returning the seatback, adjust the reclining setting while holding the ● seatback. Do not move around on top of the flattened seats. Also, when climbing ● over a seat, move carefully and step on the center of the seat.
Page 140: Second Seats
3-3. Adjusting the seats Second seats Adjustment procedure Seatback angle adjustment lever Seat position adjustment lever Moving a second seat for third seat access Pull up the lever (either tilt the seatback forward, and slide the seat forward. After getting in or out of the vehicle, slide the seat backward and raise the seatback.
Page 141 3-3. Adjusting the seats Before folding down the seatbacks Park the vehicle in a safe place. Apply the parking brake firmly and shift the shift position to P. (P. 181) Adjust the position of the front seat and the angle of the seatback. ...
Page 142 3-3. Adjusting the seats Pull up the lever. To return the rear seatbacks to their original positions, lift them up until they lock. Adjusting the position of the outboard seat back and forward ■ The seat cannot be locked if it slides for- ward as far as possible.
Page 143 3-3. Adjusting the seats WARNING When operating the seats ■ Observe the following precautions. Failure to do so may result in death or serious injury. Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, apply the parking brake firmly and shift ●...
Page 144 3-3. Adjusting the seats WARNING After tilting the second seatback forward when getting in or out of the ■ vehicle etc. Slide the seat backward and raise the seatback, and check that the seat is securely locked. If the seat is not locked, the seat may unexpectedly move and cause death or serious injury.
Page 145: Third Seats
3-3. Adjusting the seats Third seats Adjustment procedure Seatback angle adjustment lever Before folding down the seatbacks Park the vehicle in a safe place. (P. 181) Apply the parking brake firmly and shift the shift position to P. Adjust the position of the second seats and the angle of the seat- back.
Page 146 3-3. Adjusting the seats Folding down the seatbacks Pull the seatback angle adjust- ment lever. To return the rear seatbacks to their original positions, lift them up until they lock. Seat belts ■ When the seat belts are not in use, posi- Seat belt hanger tion the seat belt plates below the seat belt hangers and stow the seat belts as...
Page 147 3-3. Adjusting the seats WARNING When operating the seats ■ P. 141 Reclining adjustment ■ P. 141 After returning the seatback to the upright position ■ P. 141 NOTICE When the third seat is folded forward ■ P. 142...
Page 148: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front and second seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Third seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.
Page 149 3-3. Adjusting the seats Removing the head restraints ■ Pull the head restraint up while pressing the lock release button. Lock release button Installing the head restraints ■ Align the head restraint with the installa- tion holes while pressing the lock release button and push it down to the lock posi- tion.
Page 150 3-3. Adjusting the seats WARNING Head restraint precautions ■ Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●...
Page 151: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 152 3-4. Adjusting the steering wheel and mirrors WARNING Caution while driving ■ Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. After adjusting the steering wheel ■...
Page 153: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror (vehicles with manual anti-glare inside rear view mirror) The height of the rear view mirror can be adjusted to suit your driving posture.
Page 154 3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in ON mode, the indica- tor illuminates.
Page 155: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, press the switch. Left Right To adjust the mirror, press the switch. Right Down Left Folding and extending the mirrors Press the switch to fold the mir- rors.
Page 156 3-4. Adjusting the steering wheel and mirrors Mirror angle can be adjusted when ■ The power switch is in ACCESSORY or ON mode. When the mirrors are fogged up ■ The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the rear window defogger to turn on the outside rear view mirror defog- gers.
Page 157: Power Windows
3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 158 1 second or more. If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer.
Page 159 3-5. Opening and closing the windows WARNING Observe the following precautions. Failing to do so may result in death or serious injury. Closing the windows ■ The driver is responsible for all the power window operations, including the ● operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 160 3-5. Opening and closing the windows...
Page 161: Driving
......201 Parking brake ....187 4-4. Refueling Opening the fuel tank cap........202 4-5. Using the driving support systems Toyota Safety Sense ..205 PCS (Pre-Crash Safety system) ......211 LDA (Lane Departure Alert with steering control) ..222 Dynamic radar cruise control......232 Driving mode select switch.......246...
Page 162: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the hybrid system P. 173 Driving With the brake pedal depressed, shift the shift position to D. (P. 180) Check that the shift position indicator shows D. Release the parking brake.
Page 163 4-1. Before driving Starting off on a uphill Firmly set the parking brake with the brake pedal depressed, and then shift the shift position to D. Release the brake pedal and gently depress the accelerator pedal. Release the parking brake. When starting off on a uphill ■...
Page 164 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drum are replaced. Have your Toyota dealer per- form the bedding down operation.
Page 165 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When starting the vehicle ■ Always keep your foot on the brake pedal while stopped with the “READY” indicator is illuminated. This prevents the vehicle from creeping. When driving the vehicle ■...
Page 166 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When driving on slippery road surfaces ■ Sudden braking, acceleration and steering may cause tire slippage and ● reduce your ability to control the vehicle. Sudden acceleration, engine braking due to shifting, or changes in engine ●...
Page 167 If you hear a squealing or scraping noise (brake pad wear indicators) ■ Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 168 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When the vehicle is parked ■ Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in ● the vehicle when it is in the sun. Doing so may result in the following: •...
Page 169 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When taking a nap in the vehicle ■ Always turn the hybrid system off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to hybrid system overheating.
Page 170 4-1. Before driving NOTICE When driving the vehicle ■ Do not depress the accelerator and brake pedals at the same time during ● driving, as this may restrain the hybrid system output. Do not use the accelerator pedal or depress the accelerator and brake ●...
Page 171 Engine damage caused by water immersion ● In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: Brake function ● Changes in quantity and quality of oil and fluid used for the engine, hybrid ●...
Page 172: Cargo And Luggage
4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. WARNING Things that must not be carried in the luggage compartment ■ The following things may cause a fire if loaded in the luggage compartment: Receptacles containing gasoline ●...
Page 173 4-1. Before driving NOTICE If luggage is loaded on the roof (vehicles with panoramic roof) ■ Observe the following precautions. Failure to observe them could lead to the roof rack being damaged or deformed, or the roof rack falling off. Do not install a roof rack which inter- ●...
Page 174: Trailer Towing
Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the...
Page 175: Driving Procedures
4-2. Driving procedures Power (ignition) switch Performing the following operations when carrying the elec- tronic key on your person starts the hybrid system or changes power switch modes. Starting the hybrid system Check that the parking brake is set. Firmly depress the brake pedal. will be displayed on the multi-information display.
Page 176 4-2. Driving procedures Stopping the hybrid system Stop the vehicle completely. Set the parking brake. (P. 187) Shift the shift position to P. (P. 181) Check that the shift position indica- tor shows P. (P. 180) Press the power switch. The hybrid system will stop, and the meter display will be extinguished.
Page 177 4-2. Driving procedures Changing power switch modes Modes can be changed by pressing the power switch with the brake pedal released. (The mode changes each time the switch is pressed.) The emergency flashers can be used. The multi-information display will not be displayed.
Page 178 If the “READY” indicator does not come on ■ In the event that the “READY” indicator does not come on even after perform- ing the proper procedures for starting the vehicle, contact your Toyota dealer immediately. If the hybrid system is malfunctioning ■...
Page 179 When starting the hybrid system ■ If the hybrid system becomes difficult to start, have your vehicle checked by your Toyota dealer immediately. Symptoms indicating a malfunction with the power switch ■ If the power switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 180: Ev Drive Mode
4-2. Driving procedures EV drive mode In EV drive mode, electric power is supplied by the hybrid bat- tery (traction battery), and only the electric motor (traction motor) is used to drive the vehicle. This mode allows you to drive in residential areas late at night, or in indoor parking lots etc.
Page 181 4-2. Driving procedures Switching to EV drive mode when the gasoline engine is cold ■ If the hybrid system is started while the gasoline engine is cold, the gasoline engine will start automatically after a short period of time in order to warm up. In this case, you will become unable to switch to EV drive mode.
Page 182: Hybrid Transmission
4-2. Driving procedures Hybrid transmission Shifting the shift lever Shift lever Operate the shift lever gently and ensure correct shifting operation. Release the shift lever after each shifting operation to allow it to return to position. When shifting to the D or R, move the shift lever along the shift gate.
Page 183 4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the hybrid system Reversing Neutral (Condition in which the power is not transmitted) Normal driving Applying engine braking or strong braking when the accelerator pedal has been released on steep down- ward slopes etc.
Page 184 4-2. Driving procedures For the shift positions ■ When the power switch is off, the shift position cannot be changed. ● When the power switch is in ON mode (the hybrid system is not operating), ● the shift position can only be changed to N. The shift position will be changed to N even if the shift lever is shifted to D or R and held in that posi- tion.
Page 185 4-2. Driving procedures Reverse warning buzzer ■ When shifting into R, a buzzer will sound to inform the driver that the shift position is in R. Restraining sudden start (Drive-Start Control) ■ P. 162 About engine braking ■ When shift position B is selected, releasing the accelerator pedal will apply engine braking.
Page 186 For the shift lever ■ Do not remove the shift lever knob or use anything but a genuine Toyota shift lever knob. Also, do not hang anything on the shift lever. Doing so could prevent the shift lever from returning to position, causing unexpected accidents to occur when the vehicle is in motion.
Page 187 If any of the following situations occurs, shift control system malfunctions are possible. Immediately stop the vehicle in a safe place on level ground, apply the park- ing brake, and then contact your Toyota dealer. When the warning message indicating the shift control system appears on ●...
Page 188: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Left turn Lane change to the left (move the lever partway and release The left hand signals will flash until you release the lever. Lane change to the right (move the lever partway and release The right hand signals will flash until you release the lever.
Page 189: Parking Brake
4-2. Driving procedures Parking brake Operating instructions To set the parking brake, fully depress the parking brake pedal with your left foot while depress- ing the brake pedal with your right foot. (Depressing pedal again releases the parking brake.) Parking the vehicle ■...
Page 190: Headlight Switch
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Operating the switch turns on the lights as follows: daytime running lights turn on. (P. 190) The front position, tail, license plate and instru- ment panel lights turn The headlights and all lights...
Page 191 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 192 4-3. Operating the lights and wipers Guide to dial settings ■ Occupancy and luggage load conditions Dial position Occupants Luggage load Driver None Driver and front None passenger All seats occupied None All seats occupied Full luggage loading Driver Full luggage loading Driver and front passen- ger.
Page 193 4-3. Operating the lights and wipers Automatic light off system ■ The headlights and tail lights turn off after the power switch is turned off and the driver’s door is opened. To turn the lights on again, turn the power switch to ON mode, or turn the headlight switch to once and then back to Automatic headlight leveling system (if equipped)
Page 194: Ahb (Automatic High Beam)
4-3. Operating the lights and wipers AHB (Automatic High Beam) The Automatic High Beam uses an in-vehicle front camera to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary. Activating the Automatic High Beam system Push the lever away from you with the headlight switch in...
Page 195 4-3. Operating the lights and wipers High beam automatic turning on or off conditions When all of the following conditions are fulfilled, high beam will be automatically turned on (after approximately 1 second): ● Vehicle speed is above approximately 30 km/h (19 mph). ●...
Page 196 4-3. Operating the lights and wipers Turning the high beam on/off manually Switching to low beam ■ Pull the lever to original posi- tion. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High...
Page 197 4-3. Operating the lights and wipers The Automatic High Beam can be operated when ■ The power switch is in ON mode. Front camera detection information ■ High beam may not be automatically turned off in the following situations: ● •...
Page 198 4-3. Operating the lights and wipers In the situations below, the system may not be able to correctly detect the ● surrounding brightness levels, and may flash or expose nearby pedestrians to the high beam. Therefore, you should consider turning the high beams on or off manually rather than relying on the Automatic High Beam system.
Page 199 Do not overload the vehicle. ● Do not modify the vehicle. ● Do not replace windshield with non-genuine windshield. ● Contact your Toyota dealer. Do not replace headlights with non-genuine headlights. ● Contact your Toyota dealer.
Page 200: Fog Light Switch
4-3. Operating the lights and wipers Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Operating instructions Turns the front and rear fog lights off Turns the front fog lights Turns both front and rear fog lights on Releasing the switch ring returns it...
Page 201: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operating the lever operates the wipers or washer as follows: Intermittent operation Low speed operation High speed operation Temporary operation Wiper intervals can be adjusted when intermittent operation is selected.
Page 202 Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. To prevent 12-volt battery discharge ■...
Page 203: Rear Window Wiper And Washer
4-3. Operating the lights and wipers Rear window wiper and washer Operating the wiper lever Operating the switch operates the rear wiper or washer as fol- lows: Intermittent operation Normal operation Washer/wiper dual opera- tion Washer/wiper dual opera- tion The rear window wiper and washer can be operated when ■...
Page 204: Refueling Opening The Fuel Tank Cap
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Turn the power switch off and ensure that all the door and windows are closed. ● Confirm the type of fuel. (P. 436) Fuel types ■...
Page 205 4-4. Refueling WARNING When refueling the vehicle ■ Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. After exiting the vehicle and before opening the fuel door, touch an ● unpainted metal surface to discharge any static electricity.
Page 206 WARNING When replacing the fuel tank cap ■ Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 207: Using The Driving Support
Toyota Safety Sense ■ The Toyota Safety Sense is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 208 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Front camera...
Page 209 Do not subject the radar sensor or its surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. ● Do not disassemble the radar sensor.
Page 210 Do not attach window tint to the windshield. ● Replace the windshield if it is damaged or cracked. After replacing the windshield, the front camera must be recalibrated. Con- tact your Toyota dealer for details. ● Do not allow liquids to contact the front camera. ●...
Page 211 When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens of the front camera. Also, do not touch the lens. If the lens is dirty or damaged, contact your Toyota dealer. ● Do not subject the front camera to a strong impact.
Page 212 If the message does not disappear, contact your Toyota dealer. • When the temperature around the radar sensor is outside of the operational...
Page 213: Pcs (Pre-Crash Safety System)
4-5. Using the driving support systems PCS (Pre-Crash Safety system) The pre-crash safety system uses a radar sensor and front cam- era to detect vehicles and pedestrians in front of your vehicle. When the system determines that the possibility of a frontal col- lision with a vehicle or pedestrian is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.
Page 214 4-5. Using the driving support systems ◆ Pre-crash brake assist When the system determines that the possibility of a frontal colli- sion is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed. ◆...
Page 215 4-5. Using the driving support systems WARNING Limitations of the pre-crash safety system ■ The driver is solely responsible for safe driving. Always drive safely, taking ● care to observe your surroundings. Do not use the pre-crash safety system instead of normal braking opera- tions under any circumstances.
Page 216 4-5. Using the driving support systems WARNING When to disable the pre-crash safety system ■ In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: When the vehicle is being towed ●...
Page 217 4-5. Using the driving support systems Changing settings of the pre-crash safety system Enabling/disabling the pre-crash safety system ■ The pre-crash safety system can be enabled/disabled on (P. 94) of the multi-information display. The system is automatically enabled each time the power switch is turned to ON mode.
Page 218 4-5. Using the driving support systems Operational conditions ■ The pre-crash safety system is enabled and the system determines that the possibility of a frontal collision with a vehicle or pedestrian is high. Each function is operational at the following speeds: Pre-crash warning: ●...
Page 219 4-5. Using the driving support systems Conditions under which the system may operate even if there is no pos- ■ sibility of a collision In some situations such as the following, the system may determine that ● there is a possibility of a frontal collision and operate. •...
Page 220 4-5. Using the driving support systems • When driving on a narrow path surrounded by a structure, such as in a tunnel or on an iron bridge • When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion on the road surface or roadside •...
Page 221 4-5. Using the driving support systems • When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present Situations in which the system may not operate properly ■...
Page 222 4-5. Using the driving support systems • When driving through steam or smoke • When driving in a place where the surrounding brightness changes sud- denly, such as at the entrance or exit of a tunnel • When a very bright light, such as the sun or the headlights of oncoming traffic, shines directly into the front camera •...
Page 223 4-5. Using the driving support systems Some pedestrians such as the following may not be detected by the radar ● sensor and front camera, preventing the system from operating properly: • Pedestrians shorter than approximately 1 m (3.2 ft.) or taller than approx- imately 2 m (6.5 ft.) •...
Page 224: Lda (Lane Departure Alert With Steering Control)
4-5. Using the driving support systems LDA (Lane Departure Alert with steering control) Summary of functions When driving on highways and freeways with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane and provides assistance by operating the steering wheel to keep the vehicle in its lane.
Page 225 4-5. Using the driving support systems Functions included in LDA system ◆ Lane departure alert function When the system determines that the vehicle might depart from its lane, a warning is dis- played on the multi-information display and the warning buzzer sounds to alert the driver.
Page 226 4-5. Using the driving support systems ◆ Vehicle sway warning function When the vehicle is swaying or appears as if it may depart from its lane multiple times, the warning buzzer sounds and a message is displayed on the multi-information display to alert the driver.
Page 227 4-5. Using the driving support systems WARNING Before using LDA system ■ Do not rely solely upon the LDA system. The LDA system does not auto- matically drive the vehicle or reduce the amount of attention that must be paid to the area in front of the vehicle. The driver must always assume full responsibility for driving safely by paying careful attention to the surround- ing conditions and operating the steering wheel to correct the path of the vehicle.
Page 228 Do not install or place anything on the hood or grille. Also, do not install a ● grille guard (bull bars, kangaroo bar, etc.). If your windshield needs repairs, contact your Toyota dealer. ● Turning LDA system on Press the LDA switch to turn the LDA system on.
Page 229 4-5. Using the driving support systems Indications on multi-information display LDA indicator Illuminates when the LDA system is on. Steering control indicator and operation display of steering wheel operation support When that steering wheel assis- tance of the steering control func- tion is operating, the indicator illuminates and the operation dis- play on the multi-information dis-...
Page 230 4-5. Using the driving support systems Operation conditions of each function ■ Lane departure alert function ● This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 50 km/h (32 mph) or more. •...
Page 231 4-5. Using the driving support systems Hands off steering wheel warning ■ In the following situations, a warning mes- sage urging the driver to hold the steering wheel and the symbol shown in the illus- tration are displayed on the multi-informa- tion display to warn the driver.
Page 232 4-5. Using the driving support systems Conditions in which functions may not operate properly ■ In the following situations, the front camera may not detect white (yellow) lines and various functions may not operate normally. There are shadows on the road that run parallel with, or cover, the white ●...
Page 233 4-5. Using the driving support systems Warning message ■ Warning messages are used to indicate a system malfunction or to inform the driver of the need for caution while driving. (P. 361) Customization ■ The following settings can be changed. Function Setting details Lane departure alert function...
Page 234: Dynamic Radar Cruise Control
4-5. Using the driving support systems Dynamic radar cruise control Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the pre- ceding vehicle even if the accelerator pedal is not depressed. In con- stant speed control mode, the vehicle runs at a fixed speed.
Page 235 4-5. Using the driving support systems WARNING Before using dynamic radar cruise control ■ Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 236 4-5. Using the driving support systems WARNING Situations unsuitable for dynamic radar cruise control ■ Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 237 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 100 m (328 ft.) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 238 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance switch.
Page 239 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Dynamic radar cruise control indi- cator will come on and a message will be displayed on the multi-infor- mation display.
Page 240 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 241 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle mark vehicle-to-vehicle distance as fol- lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the power switch is turned to ON mode.
Page 242 4-5. Using the driving support systems Canceling and resuming the speed control Pulling the lever toward you cancels the speed control. The speed control is also canceled when brake pedal depressed. Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed.
Page 243 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor, etc.
Page 244 The sensor cannot detect correctly because it is covered in some way. ● Pre-crash braking is activated. ● If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
Page 245 Pre-crash braking is activated. ● If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact your Toyota dealer. Brake system operation sound ■ If the brakes are applied automatically while the vehicle is in vehicle-to-vehi- cle distance control mode, a brake system operation sound may be heard.
Page 246 4-5. Using the driving support systems Vehicles with small rear ends (trailers with no load on board, etc.) ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the ● detecting of the sensor When your vehicle is pointing upwards ●...
Page 247 4-5. Using the driving support systems Conditions under which the vehicle-to-vehicle distance control mode ■ may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 248: Driving Mode Select Switch
4-5. Using the driving support systems Driving mode select switch The driving modes can be selected to suit driving conditions. Eco drive mode Suitable for improving the fuel economy, because the torque cor- responding accelerator pedal depression amount can be generated more smoothly than it is in normal conditions and the oper- ation of the air conditioning system...
Page 249: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 250 4-5. Using the driving support systems ◆ Emergency brake signal When the brakes are applied suddenly, the emergency flashers automatically flash to alert the vehicle behind. When the VSC/TRC/ABS systems are operating The slip indicator light will flash while the VSC/TRC/ABS systems are operating.
Page 251 4-5. Using the driving support systems EPS operation sound ■ When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. Reduced effectiveness of the EPS system ■ The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time.
Page 252 The ABS, VSC and TRC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and the suspension ■...
Page 253: Driving Tips
4-6. Driving tips Hybrid vehicle driving tips For economical and ecological driving, pay attention to the fol- lowing points: ◆ Using Eco drive mode When using Eco drive mode, the torque corresponding to the accel- erator pedal depression amount can be generated more smoothly than it is in normal conditions.
Page 254 4-6. Driving tips ◆ When braking Make sure to operate the brakes gently and in a timely manner. A greater amount of electrical energy can be regenerated when slow- ing down. ◆ Delays Repeated acceleration and deceleration, as well as long waits at traffic lights, will lead to bad fuel economy.
Page 255 4-6. Driving tips ◆ Checking tire inflation pressure Make sure to check the tire inflation pressure frequently. Improper tire inflation pressure can cause poor fuel economy. Also, as snow tires can cause large amounts of friction, their use on dry roads can lead to poor fuel economy. Use tires that are appro- priate for the season.
Page 256: Winter Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 257 4-6. Driving tips When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road con- ditions. When parking the vehicle Park the vehicle and shift the shift position to P and block the wheel under the vehicle without setting the parking brake.
Page 258 4-6. Driving tips Tire chain installation ■ Observe the following precautions when installing and removing chains: Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install tire chains on the rear ●...
Page 259: Interior Features
Interior features 5-1. Using the air conditioning system and defogger Automatic air conditioning system ......258 Seat heaters ......265 5-2. Using the interior lights Interior lights list....266 • Front interior light ..267 • Front personal lights..267 • Rear interior light ...268 5-3.
Page 260: Automatic Air Conditioning
5-1. Using the air conditioning system and defogger Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Control panel Switching functions and changing settings ■ Move left and right to select the function. The function currently being set up will be surrounded by a frame.
Page 261 5-1. Using the air conditioning system and defogger Changing the airflow mode ■ Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger oper- ates.
Page 262 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between recirculated air mode and outside air mode each time the button is pressed. The indicator on turns on when the recirculated air mode is selected.
Page 263 5-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume changes according selected air flow mode. Adjusting the air flow direction and opening/closing the air ■ outlets Center Side ...
Page 264 5-1. Using the air conditioning system and defogger Using automatic mode ■ Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 265 5-1. Using the air conditioning system and defogger When the outside temperature is low ■ The dehumidification function may not operate even when is pressed. Operation of the air conditioning system in Eco drive mode ■ In the Eco drive mode, the air conditioning system is controlled as follows to ●...
Page 266 5-1. Using the air conditioning system and defogger WARNING To prevent the windshield from fogging up ■ Do not use during cool air operation in extremely humid weather. ● The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
Page 267: Seat Heaters
5-1. Using the air conditioning system and defogger  Seat heaters Heats the left front seat Heats the right front seat The indicator light comes on when the seat heater is operating. The seat heaters can be used when the power switch is in ON mode. ●...
Page 268: 5-2. Using The Interior Lights
5-2. Using the interior lights Interior lights list Shift lever lighting Front personal/interior lights (P. 267) Rear interior light (P. 268) Front door courtesy lights Footwell lights...
Page 269: Front Interior Light
5-2. Using the interior lights Front interior light Vehicles without panoramic roof Vehicles with panoramic roof   Turns the lights off Turns the lights off Turns the door position on Turns the door position on Turns the lights on Turns the lights on Front personal lights Vehicles without panoramic roof...
Page 270: Rear Interior Light
5-2. Using the interior lights Rear interior light Turns the door position on When the front interior light switch is in the off position, the rear inte- rior light will not turn on even if the door is opened with the rear inte- rior light switch in door position.
Page 271: 5-3. Using The Storage Features
5-3. Using the storage features List of storage features Bottle holders/door pockets Auxiliary boxes (P. 273) (P. 271) Card holder (P. 273) Glove boxes (P. 270) Console box (P. 270) Cup holders (P. 271) WARNING Do not leave glasses, lighters or spray cans in the storage spaces, as this ●...
Page 272: Glove Boxes
5-3. Using the storage features Glove boxes Upper glove box Lower glove box   Pull up the lever. Pull up the lever. If the lower glove box is opened when the front position lights are illuminated, the light illuminates. Console box Push the button to open the lid.
Page 273: Cup Holders/Bottle Holders/Door Pockets
5-3. Using the storage features Cup holders/bottle holders/door pockets Cup holders ■ Front passenger’s side Center console   Push the lid. Front Rear Bottle holders/door pockets ■ Front doors Rear doors   Third seats ...
Page 274 5-3. Using the storage features When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. ● WARNING Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 275: Auxiliary Boxes
5-3. Using the storage features Auxiliary boxes Type A (if equipped) Type B   Press in the lid. The overhead console is useful for temporarily storing small items. WARNING Do not store items heavier than 200 g (0.44 lb.). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident.
Page 276: Luggage Compartment Features
5-3. Using the storage features Luggage compartment features Cargo hooks Raise the hook to use. The cargo hooks are provided for securing loose items. Auxiliary boxes Center Side   Lift the deck board. Lift the center deck board and then lift the side deck boards.
Page 277 5-3. Using the storage features Luggage cover Installing the luggage cover ■ Set the holder of one side into the installation position, then install both holders from below with the cover in its contracted state. Using the luggage cover ■ Pull out the luggage cover and secure it to the hook brackets.
Page 278 5-3. Using the storage features Stowing the luggage cover ■ Lift the center deck board and remove the side deck boards. Fold inwards together with the head restraint installation hooks and secure. Then, stow in the auxiliary boxes. WARNING To avoid injury, always return the cargo hooks to their stowed positions ●...
Page 279: Using The Other Interior
5-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Slide the cover to open.
Page 280: Clock
5-4. Using the other interior features Clock The clock can be adjusted by pressing the buttons. Adjusts the hours Adjusts the minutes Rounds to the nearest hour : e.g. 1:00 to 1:291:00 1:30 to 1:592:00 The clock is displayed when the power switch is in ACCESSORY or ON ●...
Page 281: Power Outlet
5-4. Using the other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC /10 A (power consumption of 120 W). Front Rear   Open the cover. Open the cover. The power outlet can be used when ■...
Page 282: Coat Hooks
5-4. Using the other interior features Coat hooks The coat hooks are provided with the rear assist grips. WARNING Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
Page 283: Panoramic Roof Shades
10 seconds or more (until the panoramic roof shades have closed completely). If the panoramic roof shades continue to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Page 284 5-4. Using the other interior features Customization ■ The door lock linked automatic close function can be disabled. (Customizable features: P. 437) WARNING Observe the following precautions. Failing to do so may result in death or serious injury. When closing the panoramic roof shades ■...
Page 285: Rear Sunshades
5-4. Using the other interior features Rear sunshades Pull the tab up. Hook the sunshade on to the anchors. To lower the sunshade, pull the tab slightly to unhook the shade from the anchors, and lower it slowly. NOTICE Do not place anything where it may hinder the opening/closing of the sun- ●...
Page 286 5-4. Using the other interior features...
Page 287: Maintenance And Care
Maintenance and care 6-1. Maintenance and care Cleaning and protecting the vehicle exterior ..286 Cleaning and protecting the vehicle interior ...290 6-2. Maintenance Maintenance requirements....293 6-3. Do-it-yourself maintenance Do-it-yourself service precautions ......295 Hood ........297 Positioning a floor jack..299 Engine compartment..301 12-volt battery ....311 Tires........315 Tire inflation pressure ..318...
Page 288: 6-1. Maintenance And Care
6-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 289 6-1. Maintenance and care Note for a smart entry & start system ■ If the door handle becomes wet while the electronic key is within the effective range, the door may lock and unlock repeatedly. In that case, follow the fol- lowing correction procedures to wash the vehicle: Place the key in a position 2 m (6 ft.) or more separate from the vehicle ●...
Page 290 6-1. Maintenance and care WARNING When washing the vehicle ■ Do not apply water to the inside of the engine compartment. Doing so may cause the electrical components etc. to catch fire. Precautions regarding the exhaust pipe ■ Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.
Page 291 6-1. Maintenance and care NOTICE When using a high pressure car wash ■ Do not bring the nozzle tip close to boots (rubber or resin manufactured cover), connectors or the following parts. The parts may be damaged if they come into contact with high-pressure water. •...
Page 292: Cleaning And Protecting The Vehicle Interior
6-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 293 6-1. Maintenance and care Caring for leather areas ■ Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Shampooing the carpets ■ There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 294 6-1. Maintenance and care NOTICE Cleaning detergents ■ Do not use the following types of detergent, as they may discolor the vehi- ● cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 295: Maintenance
Where to go for maintenance service? ■ It makes good sense to take your vehicle to your local Toyota dealer for main- tenance service as well as other inspections and repairs. Toyota technicians are well-trained specialists receiving the latest service information through technical bulletins, service tips, and in-dealership training programs.
Page 296 Engine coolant temperature continually higher than normal (P. 358, 366) ● If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. Your vehicle may need adjustment or repair. WARNING If your vehicle is not properly maintained ■...
Page 297: Do-It-Yourself Service
12-volt battery • Grease condition • Conventional wrench (for terminal clamp bolts) (P. 311) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- Engine/power amine, non-nitrite and non-borate coolant with long- control unit life hybrid organic acid technology coolant level “Toyota Super Long Life Coolant”...
Page 298 6-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment ■ Make sure that the “POWER ON” on the multi-information display and the ●...
Page 299: Hood
6-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into the slot.
Page 300 6-3. Do-it-yourself maintenance WARNING Pre-driving check ■ Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot ■...
Page 301: Positioning A Floor Jack
6-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 302 6-3. Do-it-yourself maintenance WARNING When raising the vehicle, do not set the Rear suspension floor jack under the rear suspension. Front...
Page 303: Engine Compartment
6-3. Do-it-yourself maintenance Engine compartment Engine coolant reservoir Fuse box (P. 329) (P. 307) Radiator (P. 308) Engine oil level dipstick Condenser (P. 308) (P. 303) Electric cooling fans Engine oil filler cap (P. 305) Washer fluid tank (P. 309) Power control unit coolant reservoir (P.
Page 304 6-3. Do-it-yourself maintenance Engine compartment cover Removing the engine compartment cover ■ Installing the clips ■ Push up center portion Insert Press NOTICE After installing an engine compartment cover ■ Make sure that the cover is securely installed in its original position.
Page 305 6-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning off the hybrid system, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 306 6-3. Do-it-yourself maintenance Holding a rag under the end, pull the dipstick out and check the oil level. Normal Excessive Flat dipstick Non-flat dipstick   Measuring side The shape of the dipstick may differ depending on the type of vehicle or engine.
Page 307 6-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 308 ● not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 309 If the coolant level drops within a short time of replenishing ■ Visually check the radiator, hoses, engine/power control unit coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
Page 310 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING When the hybrid system is hot ■...
Page 311 6-3. Do-it-yourself maintenance Washer fluid Open the lid. Check the washer fluid level on the level gauge. “NORMAL” “LOW” If the washer fluid level is at “LOW”, add washer fluid. WARNING When adding washer fluid ■ Do not add washer fluid when the hybrid system is hot or operating as washer fluid contains alcohol and may catch fire if spilled on the engine etc.
Page 312 6-3. Do-it-yourself maintenance NOTICE Do not use any fluid other than washer fluid ■ Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces, as well as damaging the pump leading to problems of the washer fluid not spraying. Diluting washer fluid ■...
Page 313: 12-Volt Battery
6-3. Do-it-yourself maintenance 12-volt battery Location The 12-volt battery is located in the right-hand side of luggage compartment. Removing the 12-volt battery maintenance cover Open the center and right side deck boards. (P. 274) Remove the center auxiliary box. (P. 384) Remove the right side auxiliary box.
Page 314 Restart the hybrid system, depress the brake pedal, and confirm that it is ● possible to shift into each shift position. If the system will not start even after multiple attempts at all methods above, contact your Toyota dealer.
Page 315 When replacing the 12-volt battery ■ Use a 12-volt battery designed for this vehicle. Failure to do so may cause gas (hydrogen) to enter the passenger compartment, causing a fire or explosion. For replacement of the 12-volt battery, contact your Toyota dealer.
Page 316 6-3. Do-it-yourself maintenance WARNING When disconnecting the 12-volt battery ■ Do not disconnect the negative (-) termi- nal on the body side as shown. The dis- connected negative (-) terminal may touch the positive (+) terminal, which may cause a short and result in death or serious injury.
Page 317: Tires
Replace the tires if the treadwear indicators are showing on a tire. Tire rotation Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recom- mends that tire rotation is carried Front out approximately every 10000 km (6000 miles).
Page 318 A tire goes flat repeatedly or cannot be properly repaired due to the size or ● location of a cut or other damage. If you are not sure, consult with your Toyota dealer. Tire life ■ Any tire over 6 years old must be checked by a qualified technician even if it has seldom or never been used or damage is not obvious.
Page 319 Do not mix tires of different makes, models or tread patterns. ● Also, do not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply ●...
Page 320: Tire Inflation Pressure
Reduced safety ● Damage to the drive train ● If a tire needs frequent inflating, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 321 6-3. Do-it-yourself maintenance WARNING Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: Excessive wear ●...
Page 322: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 323 6-3. Do-it-yourself maintenance WARNING When replacing wheels ■ Do not use wheels that are a different size from those recommended in the ● Owner’s Manual, as this may result in a loss of handling control. Never use an inner tube in a leaking wheel which is designed for a tube- ●...
Page 324: Air Conditioning Filter
6-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the power switch off. Open the lower glove box and remove the filter exchange cover. Remove the filter cover. Slide and pull out the filter.
Page 325 6-3. Do-it-yourself maintenance Checking interval ■ Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Warranty and Service Booklet”.) If air flow from the vents decreases dramatically ■...
Page 326: Wiper Rubber
6-3. Do-it-yourself maintenance Wiper rubber replacement Replacing procedure Front ■ Remove the stopper, lift the wiper arm slightly upward, and then slide the wiper blade to remove it. Slowly lower the wiper arm until it contacts the windshield. Slide off the wiper rubber. Install the 2 metal plates from the removed wiper rubber to the replacement wiper rub-...
Page 327 6-3. Do-it-yourself maintenance When installing, insert the wiper rubber in the direction opposite that used during the removal procedure until the wiper rubber becomes locked and stops moving. Check the direction the wiper rubber is facing before installing. After installing the wiper rubber, install the wiper blade to the wiper arm and secure the stop- per.
Page 328: Electronic Key Battery
6-3. Do-it-yourself maintenance Electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Lithium battery CR2032 Replacing the battery Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
Page 329 6-3. Do-it-yourself maintenance Use a CR2032 lithium battery ■ Batteries can be purchased at your Toyota dealer, local electrical appliance ● shops or camera stores. Replace only with the same or equivalent type recommended by the manu- ● facturer. Dispose of used batteries according to the local laws.
Page 330 6-3. Do-it-yourself maintenance NOTICE For normal operation after replacing the battery ■ Observe the following precautions to prevent accidents: Always work with dry hands. ● Moisture may cause the battery to rust. Do not touch or move any other component inside the remote control. ●...
Page 331: Checking And Replacing
6-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the power switch off. Open the fuse box cover. Engine compartment ...
Page 332 6-3. Do-it-yourself maintenance Remove the fuse. Only type A fuse can be removed using the pullout tool. Check if the fuse is blown. Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rat- ing.
Page 333 If the lights do not turn on even after the fuse has been replaced, a bulb may ● need replacement. (P. 332) If the replaced fuse blows again, have the vehicle inspected by your Toyota ● dealer. If there is an overload in a circuit ■...
Page 334: Light Bulbs
As there is a danger that components may be damaged, we recommend that replacement is carried out by your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P. 435) Removing the engine compartment cover P.
Page 335 6-3. Do-it-yourself maintenance Rear ■ Back-up light License plate lights Rear fog light Rear turn signal light...
Page 336 6-3. Do-it-yourself maintenance Replacing light bulbs Headlight low beams (halogen headlights) ■ Turn the bulb base counter- clockwise. Unplug the connector while pressing the lock release. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert.
Page 337 6-3. Do-it-yourself maintenance Headlight high beams (halogen headlights) ■ Turn the cover counterclock- wise and remove it. Turn the bulb base counter- clockwise. Unplug the connector while pulling the lock release. Confirm whether the O-ring of the cover has not come off.
Page 338 6-3. Do-it-yourself maintenance Replace the light bulb, and set the connector. Install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn the bulb base clockwise to set. Shake the bulb base gently to check that it is not loose, turn the headlight high beams on once and visually confirm that...
Page 339 6-3. Do-it-yourself maintenance Front turn signal lights ■ Turn the bulb base counterclockwise. Vehicles with halogen head- Vehicles with LED headlights   lights Remove the light bulb. When installing, reverse the steps listed.
Page 340 6-3. Do-it-yourself maintenance Front fog lights ■ Remove the fender liner bolts and pull down the fender liner. Unplug the connector while pressing the lock release. Turn the bulb base counter- clockwise.
Page 341 6-3. Do-it-yourself maintenance Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set. Set the connector. After installing the connector, shake the bulb base gently to check that it is not loose, turn the fog lights on once and visu- ally confirm that no light is leak- ing through the mounting.
Page 342 6-3. Do-it-yourself maintenance Front position lights (halogen headlights) ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 343 6-3. Do-it-yourself maintenance Rear turn signal lights and back-up/rear fog light ■ Open the back door and remove the cover. To prevent damage, cover the tip of the screwdriver with a rag. Turn the bulb base counter- clockwise. Rear turn signal light Back-up/rear fog light Remove the light bulb.
Page 344 6-3. Do-it-yourself maintenance License plate lights ■ Open the back door and remove the cover. To prevent damage, cover the tip of the screwdriver with a rag. Turn the bulb base counter- clockwise. Remove the light bulb. ITO43P150 When installing, reverse the steps listed.
Page 345 The LED headlights, daytime running lights, front position lights (LED head- lights), stop/tail lights and high mounted stoplight consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 346 6-3. Do-it-yourself maintenance WARNING Replacing light bulbs ■ Be sure to stop the hybrid system and turn off the lights. Do not attempt to ● replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. Do not touch the glass portion of the light bulb with bare hands.
Page 347: When Trouble Arises
When trouble arises 7-1. Essential information 7-2. Steps to take in an emergency Emergency flashers...346 If your vehicle needs If your vehicle has to to be towed ......349 be stopped in an emergency.......347 If you think something is wrong ......355 If the vehicle is trapped in rising water ......348 If a warning light turns...
Page 348: Emergency Flashers
7-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 349: If Your Vehicle Has To Be Stopped In An Emergency
7-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 350: If The Vehicle Is Trapped In Rising Water
However, an emergency hammer can not shatter the windshield as it is lam- inated glass. : Contact your Toyota dealer or aftermarket accessory manufacturer for fur- ther information about an emergency hammer. Escaping the vehicle from the window ■...
Page 351: Steps To Take In An
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 352 In the following situations, it is not possible to be towed by another vehicle using cables or chains, as the front wheels may be locked due to the parking lock. Contact your Toyota dealer or commercial towing service. ● There is a malfunction in the shift control system. (P. 363) ●...
Page 353 7-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front From the rear   Release the parking brake. Use a towing dolly under the front wheels. NOTICE Towing with a sling-type truck ■ Do not tow with a sling-type truck to pre- vent body damage.
Page 354 7-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45.
Page 355 7-2. Steps to take in an emergency Emergency towing procedure To have your vehicle towed by another vehicle, the towing eyelet must be installed to your vehicle. Install the towing eyelet using the follow- ing procedure. Take out the wheel nut wrench and towing eyelet. (P. 382, 396) Remove the eyelet cover using a flathead screwdriver.
Page 356 7-2. Steps to take in an emergency While towing ■ If the hybrid system is off, the power assist for the brakes and steering will not function, making steering and braking more difficult. Wheel nut wrench ■ Wheel nut wrench is installed in luggage compartment. (P. 382, 396)
Page 357: If You Think Something Is Wrong
7-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 358: If A Warning Light Turns On Or A Warning Buzzer Sounds
• The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. This light also comes on when the parking brake is not released.
Page 359 Indicates a malfunction in: • The hybrid system; • The electronic engine control system; • The electronic throttle control system; or  Have the vehicle inspected by your Toyota dealer immediately. SRS warning light Indicates a malfunction in: • The SRS airbag system; or •...
Page 360 Indicates a malfunction in: • The VSC system; • The TRC system; or • The hill-start assist control system  Have the vehicle inspected by your Toyota dealer immediately. The light will flash when the above systems and/or ABS are operating.
Page 361 7-2. Steps to take in an emergency Warning light Warning light/Details/Actions Driver’s and front passenger’s seat belt reminder light (warning buzzer) Warns the driver and/or front passenger to fasten their seat belts  Fasten the seat belt. If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off.
Page 362 If the fuel tank is empty, refuel the vehicle immediately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer as soon as possible. Warning buzzer ■...
Page 363: If A Warning Message Is Displayed
Multi-information display If any of the warning lights come on again after the following actions have been performed, contact your Toyota dealer.
Page 364 7-2. Steps to take in an emergency Warning message and warning buzzer list Warning message Details/Actions Indicates that: • There is a high possibility of a frontal collision; • The pre-crash braking function is operating A buzzer also sounds.  Slow the vehicle by applying the brakes. Indicates that your vehicle is nearing the vehicle ahead (in vehicle-to-vehicle distance control mode)
Page 365 If this happens, applying the parking brake will enable the switch to be turned off. A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. Indicates a malfunction in the hybrid system A buzzer also sounds.
Page 366 Indicates a malfunction in the dynamic radar cruise control system Press the “ON-OFF” button once to deactivate the system, and then press the button again to reactivate the system. A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer.
Page 367 Details/Actions Indicates a malfunction in the LDA (Lane Depar- ture Alert with steering control) system A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. (Yellow) The operation conditions of the front camera (temperature, etc.) are not met.
Page 368 Details/Actions Indicates a malfunction in the pre-crash safety system A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer immediately. Indicates an engine oil pressure malfunction A buzzer also sounds.  Immediately stop the vehicle in a safe place and contact your Toyota dealer.
Page 369 Details/Actions Indicates a malfunction in the AHB (Automatic High Beam) A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. Indicates that the accelerator and brake pedals are being depressed simultaneously, and the brake override system is operating.
Page 370 Details/Actions Hybrid battery (traction battery) inspection or replacement time.  Have the hybrid battery (traction battery) inspected by your Toyota dealer immedi- ately. Hybrid system restarting will soon be disabled.  If you continue to use the vehicle in this state, you will soon become unable to restart the hybrid system.
Page 371 7-2. Steps to take in an emergency Warning message Details/Actions An attempt was made to change the shift position to B when the shift position was P or N. A buzzer also sounds.  Change the shift position to D, and then change the shift position to B.
Page 372 “If the 12- volt battery is discharged” procedure (P. 415).  If the message does not disappear: The 12- volt battery may be deteriorating. The 12-volt battery may be discharged if this continues. Have the 12-volt battery inspected at your Toyota dealer.
Page 373 Warning message Details/Actions Shift control system malfunction A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. • The hybrid system may not be able to start. • The parking lock mechanism may not func- tion. When parking, choose a level location and apply the parking brake securely.
Page 374 7-2. Steps to take in an emergency Warning message Details/Actions Indicates a malfunction in the LED headlight sys- A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. (Turns on or flashes) (If equipped)
Page 375  Have maintenance performed on the hybrid system (traction battery) cooling compo- nent at your Toyota dealer. Indicates that the EV drive mode is not available The reason the EV drive mode is not available (the vehicle is idling, battery charge is low,...
Page 376 7-2. Steps to take in an emergency Displayed message Details/Actions Indicates that the EV drive mode has been auto- matically canceled The reason the EV drive mode is not available (the battery charge is low, speed is higher than the EV drive mode operating speed range, accelerator pedal is depressed too much) may be displayed.
Page 377 7-2. Steps to take in an emergency Warning messages ■ The warning message illustrations used are intended as examples, and may differ from the image that is actually displayed on the multi-information dis- play. Warning message in dynamic radar cruise mode ■...
Page 378 7-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer Power was turned off due to the automatic power off function.  Next time when starting the hybrid system, oper-   ate the hybrid system for approximately 5 minutes to recharge the 12-volt bat- tery.
Page 379 7-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The electronic key was carried outside the vehicle and a door other than the driver’s door was opened and closed while the power switch was in a mode other than off.
Page 380 7-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer • An attempt was made to lock the doors using the smart entry & start system while the electronic key was still inside the vehicle. • An attempt was made to lock Sounds either front door by opening a once for...
Page 381 (Flashes) The electronic key has a low battery.  Once  Replace the electronic key battery. (P. 326) Indicates a malfunction in the smart entry & start system  Once  Have the vehicle inspected by your Toyota dealer. (Flashes)
Page 382 7-2. Steps to take in an emergency Warning messages ■ P. 375 Warning buzzer ■ P. 360...
Page 383: If You Have A Flat Tire
7-2. Steps to take in an emergency If you have a flat tire (vehicles with spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 315 WARNING If you have a flat tire ■...
Page 384 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Jack handle Spare tire Towing eyelet Jack Wheel nut wrench...
Page 385 7-2. Steps to take in an emergency WARNING Using the tire jack ■ Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or install- ●...
Page 386 7-2. Steps to take in an emergency Taking out the jack Remove the center and left side deck boards. Remove the center auxiliary box. Take out the jack.
Page 387 7-2. Steps to take in an emergency Taking out the spare tire Remove the center deck board and center auxiliary box. (P. 384) Unload the tool holder from the vehicle and loosen the center fastener that secures the spare tire. WARNING When storing the spare tire ■...
Page 388 7-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 389 7-2. Steps to take in an emergency Turn the tire jack portion hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indi- cate the jack point positions. Raise the vehicle until the tire is slightly raised off the ground.
Page 390 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install the wheel nuts with the...
Page 391 7-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 392 7-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 103 N•m (10.5 kgf•m, 76 ft•lbf) Reinstall the wheel ornament. Align the cutout of the wheel orna- ment with the valve stem as shown.
Page 393 7-2. Steps to take in an emergency The compact spare tire ■ The compact spare tire is identified by the label “TEMPORARY USE ONLY” ● on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. Make sure to check the tire inflation pressure of the compact spare tire.
Page 394 7-2. Steps to take in an emergency WARNING When using the compact spare tire ■ Remember that the spare tire provided is specifically designed for use with ● your vehicle. Do not use your spare tire on another vehicle. Do not use more than one compact spare tire simultaneously. ●...
Page 395 7-2. Steps to take in an emergency NOTICE Be careful when driving over bumps with the compact spare tire ■ installed on the vehicle The vehicle becomes lower when driving with the compact spare tire com- pared to when driving with standard tires. Be careful when driving over uneven road surfaces.
Page 396: Tire)
After temporar- ily repairing the tire with the kit, have the tire repaired or replaced by your Toyota dealer. WARNING If you have a flat tire ■...
Page 397 A flat tire that cannot be repaired with the emergency tire puncture repair ■ In the following cases, the tire cannot be repaired with the emergency tire puncture repair kit. Contact your Toyota dealer. When the tire is damaged due to driving without sufficient air pressure ●...
Page 398 7-2. Steps to take in an emergency Location of the emergency tire puncture repair kit and tools Emergency tire puncture repair Jack handle Towing eyelet Wheel nut wrench Jack : Removing and using the jack (P. 384)
Page 399 7-2. Steps to take in an emergency Emergency tire puncture repair kit components Hose Compressor switch Air release cap Power plug Sticker Sticker Air pressure gauge...
Page 400 7-2. Steps to take in an emergency Taking out the emergency tire puncture repair kit Remove the left-side and cen- ter deck boards, and remove the center auxiliary box. Take out the emergency tire puncture repair kit. Emergency repair method Take out the repair kit from the plastic bag.
Page 401 7-2. Steps to take in an emergency Remove the protective film from the bottle and extend the hose. Remove the air release cap from the hose. Attach the sticker enclosed with the bottle on the specified locations. (See step You will use the air release cap again.
Page 402 Remove any dirt and moisture from the wheel before attaching the sticker. If you are unable to apply the stickers, inform the nearest Toyota dealer or authorized tire dealer that sealant has been applied to the puncture when hav- ing the tire repaired or replaced.
Page 403 7-2. Steps to take in an emergency Connect the bottle to the com- pressor. As shown in the illustration, insert the bottle vertically into the com- pressor to connect making sure that the claw on the bottle’s neck is hooked onto the cutout of the com- pressor case.
Page 404 35 minutes with the switch on, the tire is too damaged to be repaired. Turn the compressor switch off and contact your Toyota dealer. • If the tire inflation pressure exceeds the specified air pressure, let out some air to adjust the tire inflation pressure.
Page 405 7-2. Steps to take in an emergency With the compressor switch off, disconnect the hose from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the hose is removed. Install the valve cap onto the valve of the emergency repaired tire.
Page 406 Store the bottle in the luggage compartment while it is connected to the compressor. Taking precautions to avoid sudden braking, sudden acceleration and sharp turns, drive carefully at under 80 km/h (50 mph) to the nearest Toyota dealer for tire repair or replacement.
Page 407 7-2. Steps to take in an emergency If the tire is inflated to more than the specified air pressure ■ Disconnect the hose from the valve. Install the air release cap to the end of the hose and push the protrusion on the air release cap into the tire valve to let some air out.
Page 408 The sealant stored in the emergency tire puncture repair kit can be used ● only once to temporarily repair a single tire. If the sealant has been used and needs to be purchased, contact your Toyota dealer. The sealant can be used when the outside temperature is from -40°C ●...
Page 409 7-2. Steps to take in an emergency WARNING Do not drive the vehicle with a flat tire ■ Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
Page 410 7-2. Steps to take in an emergency WARNING When fixing the flat tire ■ Stop your vehicle in a safe and flat area. ● Do not touch the wheels or the area around the brakes immediately after ● the vehicle has been driven. After the vehicle has been driven, the wheels and the area around the brakes may be extremely hot.
Page 411 7-2. Steps to take in an emergency WARNING Driving to spread the liquid sealant evenly ■ Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury.
Page 412 7-2. Steps to take in an emergency NOTICE When performing an emergency repair ■ A tire should only be repaired with the emergency tire puncture repair kit if ● the damage is caused by a sharp object such as nail or screw passing through the tire tread.
Page 413: If The Hybrid System Will Not Start
7-2. Steps to take in an emergency If the hybrid system will not start Reasons for the hybrid system not starting vary depending on the situation. Check the following and perform the appropriate procedure: The hybrid system will not start even though the correct starting procedure is being followed.
Page 414 ● The 12-volt battery may be discharged. (P. 415) ● One or both of the 12-volt battery terminals may be disconnected. (P. 311) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function...
Page 415: If The Electronic Key Does Not Operate Properly
Locks all the doors Unlocks all the doors Starting the hybrid system Ensure that the shift position is in P and depress the brake pedal. Touch the Toyota emblem side of the electronic key to the power switch. When electronic detected, a buzzer sounds and the power switch will turn to ON mode.
Page 416 7-2. Steps to take in an emergency Stopping the hybrid system ■ Set the parking brake, shift the shift position to P and press the power switch as you normally do when stopping the hybrid system. Replacing the key battery ■...
Page 417: If The 12-Volt Battery Is Discharged
The following procedures may be used to start the hybrid sys- tem if the vehicle’s 12-volt battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 418 7-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the exclusive jump starting terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
Page 419 Make sure the “READY” indicator comes on. If the indicator light does not come on, contact your Toyota dealer. Once the hybrid system has started, remove the jumper cables in the exact reverse order from which they were connected.
Page 420 7-2. Steps to take in an emergency When the 12-volt battery is removed or discharged ■ In some cases, it may not be possible to unlock the doors using the smart ● entry & start system when the 12-volt battery is discharged. Use the wire- less remote control or the mechanical key to lock or unlock the doors.
Page 421 ● After recharging the 12-volt battery ■ Have the 12-volt battery inspected at your Toyota dealer as soon as possi- ble. If the 12-volt battery is deteriorating, continued use may cause the 12-volt battery to emit a malodorous gas, which may be detrimental to the health of passengers.
Page 422: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the hybrid system has cooled down sufficiently, inspect the hoses and radiator core (radiator) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer.
Page 423 (The fans may not operate in freezing temperatures.) If the fans are not operating: Stop the hybrid system immediately and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 424 Reservoir “F” line “L” line Add coolant if necessary. Water can be used in an emer- gency if coolant is unavailable. If water was added in an emer- gency, have vehicle inspected at your Toyota dealer as soon as possible.
Page 425 Stop the hybrid system and contact your Toyota dealer. If the message is not displayed: The hybrid system temperature has dropped and the vehicle may be driven normally. However, if the message appears again frequently, contact your Toyota dealer. WARNING When inspecting under the hood of your vehicle ■...
Page 426: If The Vehicle Becomes Stuck
7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Set the parking brake and shift the shift position to P. Stop the hybrid system.
Page 427: Vehicle Specifications
Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)...426 Fuel information ....436 8-2. Customization Customizable features ..437...
Page 428: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 429 8-1. Specifications This number is also on the manufacturer’s label. This number is also stamped under the right-hand front seat. Engine number ■ The engine number is stamped on the engine block as shown. Engine Model 2ZR-FXE Type 4-cylinder in line, 4-cycle, gasoline 80.5 ...
Page 430 8-1. Specifications Fuel Fuel type Premium unleaded gasoline only Research Octane Number 95 or higher Fuel tank capacity 45 L (11.9 gal., 9.9 lmp.gal.) (Reference) Electric motor (traction motor) Type Permanent magnet synchronous motor Maximum output 60 kW Maximum torque 207 N•m (21.1 kgf•m, 153 ft•lbf) Hybrid battery (traction battery) Type...
Page 431 8-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN “Resource-Conserving”...
Page 432 8-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil containers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SN” means the oil quality designation by American Petroleum Institute (API).
Page 433 Capacity Power 2.7 L (2.9 qt., 2.4 Imp.qt.) control unit Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol- Coolant type based non-silicate, non-amine, non- nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 434 3.4 L (3.6 qt., 3.0 Imp.qt.) Fluid type Toyota Genuine ATF WS : The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. NOTICE Transmission fluid type ■ Using transmission fluid other than the above type may cause abnormal...
Page 435 8-1. Specifications Brakes Pedal clearance 79 mm (3.11 in.) Min. 1.0  6.0 mm (0.04  0.24 in.) Pedal free play 8 11 clicks Parking brake pedal travel SAE J1703 or FMVSS No.116 DOT 3 or Fluid type SAE J1704 or FMVSS No.116 DOT 4 : Minimum pedal clearance when depressed with a force of 196 N (20.0 kgf, 44.1 lbf) while the hybrid system is operating.
Page 436 8-1. Specifications Tires and wheels Standard tire  Tire size 205/60R16 92V Front tire  Tire inflation pressure 240 kPa (2.4 kgf/cm or bar, 35 psi) (Recommended cold tire Rear tire  inflation pressure) 230 kPa (2.3 kgf/cm or bar, 33 psi) 16 ...
Page 437 8-1. Specifications Light bulbs Light bulbs Type Halogen headlights Low beam High beam Front fog lights Front turn signal lights Front position lights (vehicles with Exterior halogen headlights) Rear turn signal lights Back-up lights Rear fog light License plate lights Vanity lights Personal/interior lights Vehicles without panoramic roof...
Page 438: Fuel Information
Use of ethanol blended gasoline in a gasoline engine ■ Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 439: Customization Customizable Features
Toyota dealer. Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Customizing vehicle features When customizing vehicle features, ensure that the vehicle is parked in a safe place with the parking brake set and the shift position in P.
Page 440 Settings that can be changed using the multi-information display Settings that can be changed using the navigation system Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, – =Not available Smart entry & start system and wireless remote control ■...
Page 441 8-2. Customization Wireless remote control (P. 114) ■ Customized Function Default setting setting Wireless remote control – – Panic function – – Automatic light control system (P. 188) ■ Customized Function Default setting setting Light sensor sensitivity Level 0 Level -2 to 2 –...
Page 442 8-2. Customization Instrument cluster (P. 90) ■ Customized Function Default setting setting French Spanish Language English – German Italian Units km (km/L) O O O (L/100km) Pop-up display – LDA (Lane Departure Alert with steering control) (P. 222) ■ Default Customized Function setting...
Page 443 8-2. Customization Automatic air conditioning system (P. 258) ■ Customized Function Default setting setting A/C auto switching opera- – – tion Heating/cooling operation minimized in Eco drive – mode Panoramic roof shades (P. 281) ■ Customized Function Default setting setting Door lock linked automatic –...
Page 444 8-2. Customization In the following situations, customize mode will automatically be turned ■ off. A warning message appears after the customize mode screen is displayed. ● The power switch is turned off. ● The vehicle begins to move while the customize mode screen is displayed. ●...
Page 445: Index
Index What to do if... (Troubleshooting) .....444 Alphabetical index ......448 Refer to the “Navigation System Owner’s Manual” for infor- mation regarding the equipment listed below. • Navigation system • Rear view monitor system • Audio/visual system • IPA (Intelligent Parking Assist)
Page 446 Toyota dealer. (P. 115) If you lose your electronic keys, the risk of vehicle theft increases signifi- ● cantly. Contact your Toyota dealer immediately. (P. 117) The doors cannot be locked or unlocked Is the electronic key battery weak or depleted? (P. 326) ●...
Page 447 What to do if... (Troubleshooting) If you think something is wrong The hybrid system does not start ● Did you press the power switch while firmly depressing the brake pedal? (P. 173) ● Is the shift position in P? (P. 173) ●...
Page 448 What to do if... (Troubleshooting) A warning buzzer sounds during driving The seat belt reminder light is flashing ● Are the driver and the front passenger wearing the seat belts? (P. 359) The parking brake indicator is on ● Is the parking brake released? (P. 187) Depending on the situation, other types of warning buzzer may also sound.
Page 449 What to do if... (Troubleshooting) When a problem has occurred If you have a flat tire ● Vehicles without spare tire Stop the vehicle in a safe place and repair the flat tire temporarily with the emergency tire puncture repair kit. (P. 394) Vehicles with spare tire ●...
Page 450: Alphabetical Index
Alphabetical index Alphabetical index Anchor fitting ......60 Antenna A/C..........258 Smart entry & start system ... 128 Air conditioning filter....322 Anti-lock brake system Automatic air conditioning (ABS) ........247 system ........ 258 Function ........ 247 Pollen removal mode .... 260 Warning light......
Page 451 Alphabetical index Bottle holders......271 Child safety ........ 50 Brake 12-volt battery precautions ... 313 Fluid ........433 Airbag precautions....42 Parking brake......187 Back door precautions ..125 Regenerative braking....75 Child restraint system ..... 51 Warning light ......356 How your child should wear Brake assist......
Page 452 Alphabetical index Driver’s seat belt reminder light......... 359 Daytime running light Driving system ........190 Break-in tips......162 Defogger Correct posture ....... 30 Outside rear view mirrors..260 Driving in the rain....161 Rear window ......260 Driving mode select switch ... 246 Windshield ......
Page 453 Alphabetical index Emergency, in case of Engine If a warning buzzer sounds ... 356 Accessory mode ....175 If a warning light turns on..356 Compartment ......301 If a warning message is Engine switch......173 displayed ......361 Exhaust gas precautions ..73 If the 12-volt battery is Hood ........
Page 454 Alphabetical index Engine oil Front passenger’s seat belt Capacity ........ 428 reminder light ......359 Front position lights Checking ....... 303 Preparing and checking Light switch ......188 before winter....... 254 Replacing light bulbs..... 343 Front seats ....... 134 Engine switch......173 Auto power off function ..
Page 455 Alphabetical index Heaters Automatic air conditioning Identification system ........ 258 Engine........427 Outside rear view mirrors..260 Vehicle ........426 Seat heaters......265 Ignition switch High mounted stoplight (Power switch)....... 173 Replacing ......343 Auto power off function ..175 Hill-start assist control....
Page 456 Alphabetical index Keyless entry Language (multi-information Smart entry & start system..128 display)........437 LDA (Lane Departure Alert) ..222 Wireless remote control ..114 Keys .......... 114 Lever Electronic key......114 Auxiliary catch lever....297 Engine switch......173 Hood lock release lever ..297 Shift lever......
Page 457 Alphabetical index Maintenance Navigation system Do-it-yourself maintenance ... 295 Maintenance data ....426 Maintenance requirements ... 293 Odometer........91 Malfunction indicator lamp ..357 Meter Engine oil ......428 Indicators ........ 86 Opener Instrument cluster light Fuel filler door ....... 204 control........
Page 458 Alphabetical index Power windows Jam protection function..156 P position switch ..... 181 Operation ......155 Parking brake Window lock switch....155 Operation ......187 Pre-Crash Safety system (PCS) Parking brake engaged Function ........ 211 warning buzzer ....356 Warning light......357 Parking lock ......
Page 459 Alphabetical index Rear view monitor system Seat heaters ......265 Rear window defogger .... 260 Seats Rear window wiper ....201 Adjustment.... 134, 138, 143 Refueling ........202 Adjustment precautions ..136 Capacity ........ 428 Child seats/child restraint system installation ..51, 60 Fuel types ......
Page 460 Alphabetical index Smart entry & start system ..128 Switch Antenna location ....128 AHB (Automatic High Entry functions ...... 118 Beam)......... 192 Starting the hybrid system ..173 Audio remote control Warning message ....376 switches Snow tires......... 254 Clock adjustment buttons ..
Page 461 Alphabetical index Tail lights Upper anchorage strap ..... 60 Light switch ......188 USB memory Replacing light bulbs..... 343 USB port Talk switch Telephone switch Theft deterrent system Vanity lights Immobilizer system ....83 Vanity lights ......277 Tire inflation pressure Wattage ........
Page 462 Alphabetical index Warning lights Washer ABS........357 Checking....... 309 Automatic headlight leveling Preparing and checking system ........ 358 before winter....... 254 Brake system ......356 Switch ......199, 201 Charging system ....356 Washing and waxing ....286 Driver’s seat belt reminder ..359 What to do if...
Page 463 Alphabetical index : Refer to the “Navigation System Owner’s Manual”.
Page 464 Alphabetical index...
Page 465 Alphabetical index...
Page 466 GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 297 P. 204 Hood lock release Fuel filler door opener Tire inflation pressure lever P. 297 P. 204 P. 434 Fuel tank capacity 45 L (11.9 gal., 9.9 Imp.gal.) (Reference) Fuel type Premium unleaded gasoline only P.

Toyota PRUS V 2020 Owner's Manual

For Safety and Security

1-1. for Safe Use

Hybrid System Precautions

Theft Deterrent System

Instrument Cluster

Instrument Cluster Warning Lights and Indicators

Operation of each Component

3-1. Key Information

3-2. Opening, Closing and

3-3. Adjusting the Seats

3-4. Adjusting the Steering

3-5. Opening and Closing the

Driving

4-1. before Driving

Driving Procedures

4-3. Operating the Lights

Refueling Opening the Fuel Tank Cap

Using the Driving Support

Driving Tips

Interior Features

5-1. Using the Air Conditioning

5-2. Using the Interior Lights

5-3. Using the Storage Features

Using the Other Interior

Maintenance and Care

6-1. Maintenance and Care

Do-It-Yourself Maintenance

Maintenance

When Trouble Arises

7-1. Essential Information

Steps to Take in an

Vehicle Specifications

Specifications Maintenance Data (Fuel, Oil Level, Etc.)

Customization Customizable Features

Quick Links

Related Manuals for Toyota PRUS V 2020

Summary of Contents for Toyota PRUS V 2020