Engine (Ignition) Switch (Vehicles With A Smart Entry & Start System) - Toyota VIOS Owner's Manual

Engine (ignition) switch (vehicles with a
smart entry & start system)
Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch mode.
Starting the engine
1
Check that the parking brake is set.
2 Check that the shift lever is set in P (continuously variable transmis-
sion) or N.
Vehicles with a drive monitor display

3 Firmly depress the brake pedal (continuously variable transmis-
sion) or clutch pedal (manual transmission).
The smart entry & start system indicator light (green) will turn on.
If the indicator light does not turn on, the engine cannot be started.
4 Press the engine switch shortly
and firmly.
When operating the engine switch,
one short, firm press is enough.
It is not necessary to press and
hold the switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal (continuously variable trans-
mission) or clutch pedal (manual
transmission) until the engine is
completely started.
2NR-FBE engine only: The
indicator turns on. The engine will
start after the indicator light goes
out.
The engine can be started from any engine switch mode.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
4-2. Driving procedures
223
4