138
2. Instrument cluster
Changing the display
Vehicles with a drive monitor display
P. 140
Vehicles with a multi-information display
Switches the items of the odome-
ter and trip meter display by
pressing the "TRIP" switch.
When the trip meter is displayed,
pressing and holding the "TRIP"
switch will reset the trip meter.
Adjusting the clock
The clock can be adjusted by pressing the buttons.
Adjust the hours
1
Adjust the minutes
2
Press both buttons at the same
3
time to round to the nearest
*
hour
*
: e.g. 1:00 to 1:29
1:30 to 1:59
The meters and display illuminate when
■
Vehicles without a smart entry & start system
The engine switch is in the "ON" position.
Vehicles with a smart entry & start system
The engine switch is in IGNITION ON mode.
Clock
■
When the battery terminals are disconnected and reconnected, the clock will
automatically be set to 1:00.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
1:00
2:00