Bosch ICP-EZM2 Easy Series System Reference Manual page 86

86 en | Device Specifications and Overview
Sensitivity Settings
All sensitivity settings are programmed at the control panel (refer to Section 5.2.6 Point
Programming Items, page 52). The sensor element has two settings:
–
–
Gross Attack is always enabled. The Minor Attack setting is very sensitive and can be disabled.
NOTICE!
i
A single tap such as a branch in the wind lightly brushing a window can start the minor attack
timer and tap count. To avoid false alarms, do not use the Minor Attack setting where there is
potential for stray vibrations.
Test Mode
The unit is automatically in Test mode for the first 10 minutes after power up.
The green LED flashes:
–
–
–
F01U087835 | 02 | 2008.10
Gross Attack
Minor Attack
Once to indicate initialization is complete and the unit is in Test mode
Twice to indicate a Minor Attack test
Three times to indicate a Gross Attack test
System Reference Guide
Easy Series
Bosch Security Systems, Inc.